The iHybrid APV - A fully Customizable Genesis

[silentdoom]

I believe you dip the entire metal piece to anodize? Don't quote me

 

[Out Of The Ashes]

Like the new switch design. Are you still planing to sell an upgrade kit for the old switches?

 

[kiska]

well, I want to release them with the hell raisers, I will make 200-300 tomorrow if the response is good, I LOVE it, and no one can mess it up, the throw is soft, I made it were you can use the magnets yall already have It is honestly very nice and very easy to use

I'm in, hurry up and put them up for sale

 

[Escapereality]

well, I want to release them with the hell raisers, I will make 200-300 tomorrow if the response is good, I LOVE it, and no one can mess it up, the throw is soft, I made it were you can use the magnets yall already have It is honestly very nice and very easy to use

I need one of these...maybe two.

 

[ATX]

Personally I don't mind it being raw aluminum. I'd rather avoid any issues that come of anodizing the switch. And I don't think it takes away from the look being that the current switch on LE's are raw also. JMHO of course.

 

[CHARGER72]

You would have to mask off the threads and the inside I think. Oh boy that would take forever

 

[Viper2377]

well, I want to release them with the hell raisers, I will make 200-300 tomorrow if the response is good, I LOVE it, and no one can mess it up, the throw is soft, I made it were you can use the magnets yall already have It is honestly very nice and very easy to use

ok so I like it,
I would not mind if that came on my new HR

I don't understand why the outside casing of the switch can't be anodized though?
I understand the button itself and insides need to not be but the part everyone sees?

Believe the HR WILL have the new switch..

 

[Nurzrachit]

Sup gang. Never a dull moment in faceless land.

 

[Escapereality]

What is the price range on the new switch?

 

[kiska]

I will still engrave the switch but the old switch bottom parts will not fit in the new design, you have to use the switch they came with if you want to keep their logo buttons

Fine, we can use the old switches for the tubes with the 510 connection . And when will those be out sir?

 

[ATX]

Sup gang. Never a dull moment in faceless land.

No doubt! I'm super stoked about my HR now. Not that I wasn't before, but this makes it a whole different beast.

 

[Sgresham]

No doubt! I'm super stoked about my HR now. Not that I wasn't before, but this makes it a whole different beast.

I totally agree with you. I was excited beyond belief, and now the beyond belief is even beyond that. Mind-blowing.

 

[Viper2377]

Wish we could purchase the color tube kits now, I'd wait...it's killing me thinkin I could miss when they are released.

 

[goldcoastmat]

Starting to really check out these PV's, the LE's look really nice. Been stalking a few on different classifieds.. How quickly do they typically sell out when released? and how much are the LE's from the site? same price or more than the standards?

 

[Pooladdict247]

Diggin that new switch! Would be stoked to get the HR with that new switch design. I know it'd be much tougher to do, but a 5 point instead of 4 on a HR would be more fitting for the HR engraving.
Changing the magnets to adjust the throw pressure is also a winner winner chicken dinner.

 

[ATX]

Starting to really check out these PV's, the LE's look really nice. Been stalking a few on different classifieds.. How quickly do they typically sell out when released? and how much are the LE's from the site? same price or more than the standards?

Some quicker than other. Depends on how many that particular design appeals to and how many Face makes. Illuminati went in a few mins, HellRaisers were up for half an hour or so. But only 22 or 23 Illuminati's were made if I remember correctly. About 80 HR's were made.

Either way I wouldn't take your time trying to snag one.
And LE's are $255, or have been. I would think it could change depending on costs of the new switch, but just a guess, Face hasn't said anything about it. Standards have been $225

 

[Viper2377]

Starting to really check out these PV's, the LE's look really nice. Been stalking a few on different classifieds.. How quickly do they typically sell out when released? and how much are the LE's from the site? same price or more than the standards?

$35 more, with alot more detail and a drip! Totally worth it!!
Depends on how many he makes, the flower was released and then more the next day..but obtainable if you check the sight and get there when he advertises release....
also for a heads up ...release dates...
https://docs.google.com/spreadsheet/lv?key=0AmYrSL_FJC4NdHZUb0xvVzRrNi1Qb2NCQ0dUUVdZUmc#gid=1

 

[Faceless]

Face, what's the ink on your arm bro?

not being rude, but its personal
you cant read any of my tats, they are just for me

I knew Face was cool....He's a Giants fan Haha!!

I'm a huuuuge giants fan, since I was 10

ok so I like it,
I would not mind if that came on my new HR

I don't understand why the outside casing of the switch can't be anodized though?
I understand the button itself and insides need to not be but the part everyone sees?

it would require tons of masking and I honestly dont like the extra 4-5 day wait it would cause and potential non firing or weak firing issues, just trust me

On to the oring part from a few pages back.

I only had 1 oring come with mine and its not as tight as I would like but I have not had the cap come completely off like the zen does every time I sneeze on it.
I am sure the tank protector helps hold it on but I think I will find some of the larger orings as well...

magnets
can I use the magnets that came with my zen?
if so where do you put them?

you can use the zen magnets but you have to force them in and you will not be able to get them back out

Like the new switch design. Are you still planing to sell an upgrade kit for the old switches?

yes, I will sell the upgrade kit for a few $$

Believe the HR WILL have the new switch..

Thats the plan, waiting on feedback, but in all honesty, this thing is way awesomer (agent orange gave me that vocab)

You would have to mask off the threads and the inside I think. Oh boy that would take forever

excactly

What is the price range on the new switch?

I'll figure cost in the morning, I determine it by time it takes to machine, material cost, electricity cost, and gas prices (probably around $4000 due to gas)

Fine, we can use the old switches for the tubes with the 510 connection . And when will those be out sir?

very very soon

 

[silentdoom]

Lol, at 4 grand, it's a steal!

 

[UnFettered_Soul]

Hey all.....
between 18+ hour work days and squeezing in Christmas shopping for my kids, I'm totally fried.
I'm too tired to catch up.... someone post me a Reader's Digest version? LOL