The iHybrid APV - A fully Customizable Genesis

[bk78]

This is what I feared. Any small but decent rebuildables that won't look ridiculous on an ego twist?



Thanks, I replied. Appreciate the info



Ughhh is right. But if it's what needs to be done, it's what needs to be done. But like I asked crash, any small RBAs that are cheap and won't look absolutely ridiculous on the ego twist?

The QZI mini genesis is nice and small for the ego http://www.e-cigarette-forum.com/forum/atomizer-reviews/357124-qzi-minigenesis.html

 

[xformulax]

WHEW, back to work after being off for the last 14 days and a 12 hour shift to boot this sucks.
Does anyone know of a mod/tank that I can carry and/or lay down with out it leaking. Need something to bring to work, ATVing, out fishing, general beater but good and has decent taste??
I was using a Zmax with the AGA-t had it in my zip up jacket front pocket leaned against the tailgate of the truck and the 510 connector and AGA broke free from the body. I was able to wiggle it back onto the base but I am looking for something more reliable.

Billet box

Sent from my Galaxy S3 powered iHybrid Spider LE.

 

[EyedeaGraphics]

What about the Kanger t3 with stainless mesh in them? has anyone seen anything about those yet? I think they could be great as they hold quite a bit of juice.

 

[grruss]

Thanks, Grruss. Where would you recommend I buy the cartos from? And Charger also recommended that flavor, so I'm going to buy it right now.

Lots of places. You can buy them from Mr E with the juice. Save on shipping. Call and talk to Dave, tell him I sent you. He'll fix you up.

Sent from my Galaxy Nexus using Tapatalk 2

 

[EyedeaGraphics]

Oops nevermind I figured out they don't come that way but Mark Todd did a great video on how to do it and sounds like something you could do and rebuild when the coil goes bad. And at $6.50 a piece thats a no brainer. He'll be able to see the juice level and all. Definitely a cheaper alternative to throwing a genesis on there.

 

[grruss]

This is what I feared. Any small but decent rebuildables that won't look ridiculous on an ego twist?



Thanks, I replied. Appreciate the info



Ughhh is right. But if it's what needs to be done, it's what needs to be done. But like I asked crash, any small RBAs that are cheap and won't look absolutely ridiculous on the ego twist?

AGA-S. Perfect size for an Ego or 14500 mod. All stainless. Pretty easy build.

Sent from my Galaxy Nexus using Tapatalk 2

 

[jinxt]

I did 3 juice burns, but not on the whole wick- I never have, just the top part(hopefully this is where I'm going wrong!!)!!!!

And recently, I've stopped making a hole up the center, just rolling as tightly as possible. Is this what people mean by fat wick?

Thanks jinxt

I don't oxidize the whole wick but I juice burn the whole thing. It might be a placebo but I've found it really helps capillary wicking. Fat wick = solid wick, yes.

Sent from my phone.

 

[jcarabelos]

Lots of places. You can buy them from Mr E with the juice. Save on shipping. Call and talk to Dave, tell him I sent you. He'll fix you up.

Sent from my Galaxy Nexus using Tapatalk 2

Thanks for the tip, I'll give them a call shortly

Oops nevermind I figured out they don't come that way but Mark Todd did a great video on how to do it and sounds like something you could do and rebuild when the coil goes bad. And at $6.50 a piece thats a no brainer. He'll be able to see the juice level and all. Definitely a cheaper alternative to throwing a genesis on there.

That looks very promising, and may just be what I need. Thanks so much!

AGA-S. Perfect size for an Ego or 14500 mod. All stainless. Pretty easy build.

Sent from my Galaxy Nexus using Tapatalk 2

Grruss I may just have to be added to that list of your extended grandchildren. I appreciate all of your help Will check this out now!

Such great advice. This is why I love this community!

 

[Omni3vil]

AGA-S. Perfect size for an Ego or 14500 mod. All stainless. Pretty easy build.

Sent from my Galaxy Nexus using Tapatalk 2

The AGA-S is a very good choice. Very reliable,cheaper, and easy to set up. I currently use it on my evic but have used it on a twist, tele, and vmax with no issues.

 

[Cyclin]

I do the same thing sometimes.. my ol lady doesn't vape. Had a similar situation once and ever since, anything vape related is now off limits for her.. lol even empty packages..

Same here, she has thrown away a few "empty packages" which I had to dig out. I almost lost 2 square ft of mesh and another time my GE 18350 tube! One time she succeeded in throwing away stuff but it was phone replacement parts for an iPhone I was fixing for a vaper.

Some of you know that I have an 11 year old daughter to whom I am decidedly not cool. We went to dinner at Buffalo Wild Wings tonight and on our way home, I told her I was cool and she didn't realize it. Understand that, to her, the only thing in the world that's cool is One Direction. Anyway, her response when I claimed coolness?


"Maybe in vape world."

EDIT: On a side note, Mrs grruss is playing the piano right now. That makes me very happy.

In vape world Sounds like my wife. She knows all my stories alreadys o when she hears a new one that doesn't involve her she says "Must be your internet friends. Vape friends "

aarrgghh!!

Agreed!!

dont know about yall but the past few weeks have been terrible, yall wouldn't believe what happened to me the past few days

Woke up jan 1st to state troopers at my front gate, I went out to see what was going on and was placed under arrest for Larceny, my wife and I were freaking out, they took me to jail and it was a holiday so I couldnt bond out or find anything about the charge until this morning. They took me to talk to the judge and had the wrong guy, I spent over 24 hours in jail for mistake in identity with felons, ..., that topped off the bad week I had prior, glad it was a mistake in idenity, it was a 20yr sentence, now I have to sue the county for pain and anguish, gonna have a field day with this one!! So how was everyone elses new years lol

That is so freakin' ridiculous glad you got it sorted.

Update: flowers ship tomorrow for engraving, as soon as I get them back they will ship, probably monday they will go out

Nice! Very excited.

I'm never going to be able to sleep now; sorry to change the topic again, but I have to gush, because I am getting a green envy!!!!!!!! I am so so so very happy that I can't contain it any longer! TY to face for making such a beautiful piece of art, to Murdock for inspiring him with Pluid, to Amie for going out of her way to help me find one, and to one klee6150 for being able to part with hers!!!!!!! I absolutely cannot express how happy I am right now, and I'm much more an Eor than a Tigger, so that's something! Sweet dreams y'all, I'll take the first watch, as I'm not sleeping anytime soon!

You're gonna love it! My GE is my favorite device right now...

I have a double koi fish tat on my shin that my cousin designed for me right before she passed, so there kind of special to me but i would love to see a koi fish on a LE, i know its prolly not everyones cup of tea, one like this would prolly have to be simplified to be engraved though...

• sent from a janky iphone 5

I also have a few Koi's tattooed on myself, and am a huge fan of traditional Japanese art. I would LOVE a Koi LE, honestly, that would be the perfect one for me, even more so that a Doctor Who LE (tho its a close second) Actually, the very first times I decorated a PV it was my old Lavatube (First VV device) and the were two Kois. Needless to say my skills with PV's have greatly improved since then.

A Koi fish has been #2 on the list for months, for personal reasons - I'm a Pieces. I was thinking a teal blue color for it. Check with your cousin if commercial use of their image is alright, it wouldn't need to be simplified, that would take to laser engraving really well. If you have the ability to get a higher pixel count scan that would be better though, the lower the pixel count the muddier the final product is when it coming from a drawing like that. Anyway.. PM me please so we can talk about it more and figure out the other elements, color, and if your cousin will let us use this awesome image.

I am also a Pisces!! Koi LE ...!!!

Koi LE would be awesome.

+1,000 !!!

I would probably recommend a VAMO mod for about $45-50.
On juice, I would say RAWR's Nutty Tobacco - it's on of the best tobacco juices out there that I have tasted and has that nutty "Marlboro" quality.
attys? for a beginner, I would probably go with Vision Stardust clearos - they have easy replaceable heads

Another good VV device in that price range would be the Innokin iTaste MVP. I have 2 converts using it and my wife uses hers almost exclusively. It was $53.99 w/ Free Shipping when I purchased the kit last week.

Thanks, Grruss. Where would you recommend I buy the cartos from? And Charger also recommended that flavor, so I'm going to buy it right now.

Best prices I've seen short of co-ops are SureVapes Multi-pack deals. here is a link

Second favored place to buy cartos short of co-op for me would be VaporBeast

 

[xformulax]

My vote is for aga-s as well

Sent from my Galaxy S3 powered iHybrid Spider LE.

 

[Omni3vil]

Here it is on the evic. Sorry couldn't load directly to the forum.

 

[Cyclin]

OK heres my multi-quote from yesterday. It took so long to catch up I never got a chance to post

Oh holy f-ing crap you guys are chatterboxes... Woohoo! All caught up And it only took the last 7 hours at work! (seriously I leave in like an hour lol

A doctor ihy would freakkin rock, maybe we could find some stuff that wouldnt infringe on copyrights, make the cutouts looks like a police booth and all blue, the engraving could be a time vortex just sayin'

• sent from a janky iphone 5

+1,000,000,000 A Doctor iHy would complete my life.

I still haven't tried pluid but I really want to try the AO. Sounds delectable

Sent from my Nexus 7 using Tapatalk 2

Its not for everbody but it is VERY good in my opinion. I just ordered another bottleeven after telling myselk I wouldn't

Future iHy? The iHy400!

Priceless

I think a Medusa engraving and clash of the Titan's theme or gods of war theme would get attention for the next LE...

Sent from my SCH-R910 using Tapatalk 2

I think that would be a good one, plus there are lots of non-copyrighted graphics to use! (Disclaimer: Use of Zeus' visage without express permission from Olympian Assets LLC will result in legal action taken against you. This legal action will happen in form of lightening bolts. Have a nice day.)

So I got it out of the box and admired it for a while. Sure is beautiful. Took it apart, figured out the switch etc. filled the tank with a new flavor (for me) Rawr's Truth Serum. Oxidized a wick, coiled it and hit the switch. Pop! Top coil lights up and snaps. So I did a new coil and Pop! again. New coil, Pop!, new coil, Pop! Repeated this process too many times for what seemed like a long time. Finally decided to watch Jaimie's video again hoping for a clue about my coil problem. Yup he mentions it - he had a hard time at first too. I go back to coiling and loosen the screw on the positive pole. Hotspot appears but it's smaller than before. Loosen the screw a bit more and... We're good to go!

You all know this of course. Tons of vapor and the best part - taste. Never had such pure-tasting juice before. I'm loving the iHy more than my previous fave combo, Atmizoo Dingo with Bliss. Need more iHys ASAP.

Glad you got it running! I hear ya on being able to finally taste your juice. Genesis atties are a whole new world.

View attachment 165024View attachment 165025View attachment 165026View attachment 165027ok got it now..

I forget what these images are. will edit post lol

Hello hybreeds. Tomorrow should be the day I'm finally able to vape an ihy. Stoked! And silentdoom how old are you? I thought maybe I was the youngest at 25. But then again it isn't really easy to guess everyone's ages

Sent from my Nexus 7 using Tapatalk HD

Nope not the youngest
<< 24

Ok... did the unthinkable.. joined FB just to stalk for news about shipping on the flowers. Is there a support group or something to help w/ my obsession w/ this?

Your here.

Still catching up.....
but wanted to share my own "vape station".

Some of you have already seen this.
I modified a Jewelry Amoire I picked up cheap with my laser engraver and some walnut blanks I had.

As I said in my "other" post, an actual wood worker could have done a better job, but it's working and working well.

Crappy pictures, sorry about that.

Now THAT is a freakin' vape station! Very nice!

I see the like button, but thinking we need an "I'm jealous" button

edit: also guessing that tank protector would look REALLY nice with the red dragon battery sleeve...

Pretty sure when you click "Like" on a picture it IS the "I'm jealous button" lol

Oh my gosh guess what??...I just got a phone call from a manager at the store.....someone turned in my spider tubes... They wrote a note and it said sorry..So the store manager thinks it might have been one of the bag boys and heard my husband talking about it..or the police asking the manager I am so freaking thrilled!!

NICE!!!!!!!!!!! That is so awesome amie I am so happy for you!

i'm the youngest, at 18.

1994
i don't vape exclusively, just to save money (ya right...)

^^^ Winner winner ^^^

cool mods
cool guns
cool dawgs
cool people

.....what a nice place to be

Agreed

airstone wicks...ahhhhhhhh 2013 is full of bubbles


http://www.e-cigarette-forum.com/fo...82-next-big-thing-porous-ceramic-wicks-8.html

How has this been coming? I am still wiating for my glass wicks to come in, should be here and setup this week

I buy mine here RTD Vapor and use ECF5 for 5% off.

They take Paypal too.

Same here, every time

 

[KTK8]

I feel so lost...I don't even know any of these new kids, am I in the right place??!?!?!

 

[goldcoastmat]

I feel so lost...I don't even know any of these new kids, am I in the right place??!?!?!

It's ok KT we all know you

 

[spraintz]

AVA 510 atomizer uses ceramic.....

 

[jcarabelos]

AVA 510 atomizer uses ceramic.....

I used to use these but then the quality seemed to diminish and I stopped buying them. Too pricey but thanks for the recommendation....I had almost completely forgotten about them!

 

[spraintz]

Yeah, I kinda bailed on em after I got into rebuildables and ss mesh. mesh all the time for me

 

[jcarabelos]

So cartos don't use silica for the coil? That's what I've gathered from everyone's recommendations, but I don't know for sure. Never cracked one open to see.

 

[Cyclin]

So cartos don't use silica for the coil? That's what I've gathered from everyone's recommendations, but I don't know for sure. Never cracked one open to see.

Some do, for example the CE3 cartos. Filler-type cartos like Boges use a white filler material, called polyfill.

^^ CE3 ^^