The iHybrid APV - A fully Customizable Genesis

[tigerlily]

FP arrived today. Mailman didn't show up until nearly 5:30 tonight. I was beginning to think it wasn't going to come. I managed to get a working coil on my second try. I don't have a multimeter handy so I have no idea what it's measuring at. I'm getting plenty of vapor, but not a whole lot of flavor. I don't know if that's because of the juice I'm using, the wick, or the coil. I suspect I may just need to give it some time to break in, or I may need to try a different juice.

This thing is absolutely gorgeous though! The engraving is remarkable. It's going to take me a while to get used to a bottom switch, but it's really easy to use. I ordered some of the ribbon wire somebody mentioned earlier and I have three backup tanks ordered also. I'm probably going to want to get some more mesh eventually, but otherwise I'm good to go.

 

[elfstone]

I'm really glad people in our thread have been taking a moment to send their comments to the FDA.

I just wanted to remind you this is only the beginning, soon the FDA will propose what they call the 'deeming regulation' that will place e-cigarettes under the Tobacco Act and, consequently, lots of trouble.

Please consider going and submitting your comments to the FDA. I know ECF has a banner about it, but it's worth another reminder.

Find more info here.

Submit your comments here: Regulations.gov (there is a blue button in the right upper corner).

Thanks. I apologize in advance, but I will repost this a few times until the deadline.

 

[amienichole]

Nice to meet ya

 

[NancyR]

Got the flower power today, was going to give it to the wife for Christmas but this is a little too late for that. What does everyone here think just give it to her or wait till Valentines day??
She is currently working a Sieligi Telescoping Mod with an AGA-T and smokes about 4-6 ciggs a day.

I guess the question should be, do you want her happy, or do you want to be sleeping on the sofa?

 

[ingline]

what do we put in on the organization name?

 

[AlmightyGod]

Thank you to everyone who watched the show tonight.

It wouldn't be much of a show without you.

Someone get Faceless (another) Juggernaut!

 

[ingline]

welcome kargonet..

 

[amienichole]

Night all

 

[ingline]

nite amie....

 

[ATX]

what do we put in on the organization name?

If I remember correctly you just put individual or private consumer.... I think it gives ya instructions on the first post of that thread.

 

[ingline]

ok done...thanks ATX

 

[ingline]

ok got to go take a shower.. bbl all

 

[Newlook]

Help! Just got a Hell Raiser LE in the mail today and I am trying to wrap a coil and wick but am getting only red on the top then pop it goes tried rolling new wick and oxidizing then tried 30 instead of 32 gauge wire but no matter what it seems like I do it just get hot on top then pops and back I go. I have 6 different hybrids that I have used for a couple of months now so I am not to new to this. This is the first Ihybrid I have owned though so did not know if I may be doing something wrong. Any tips would help out great!!! Thanks

 

[Fisty]

My husband introduced me to iHybrids. He has a Standard and a HellRaiser. I got my first but probably not last LE today, the FlowerPower.
It is gorgeous and I can't wait for him to set it up for me. THIS mod will be what I quit with and this time for good!

Why don't you have him walk you through setting it up on your own? My fiance is scared to wrap his own coils, it drives me crazy.

The Breast Cancer Awareness LE is designed and rendered, waiting in Face's PM box for his approval.

And I bought some wedding rings this evening.. https://www.tanga.com/deals/4b13d6737d/light-tungsten-ring-with-silver-dragon-inlay

 

[ingline]

wow them are sweet Fisty...ya my wife will not wrap a coil for nothing...lol

 

[goldcoastmat]

Help! Just got a Hell Raiser LE in the mail today and I am trying to wrap a coil and wick but am getting only red on the top then pop it goes tried rolling new wick and oxidizing then tried 30 instead of 32 gauge wire but no matter what it seems like I do it just get hot on top then pops and back I go. I have 6 different hybrids that I have used for a couple of months now so I am not to new to this. This is the first Ihybrid I have owned though so did not know if I may be doing something wrong. Any tips would help out great!!! Thanks

how are you making your wick and coil? check the reference sheet in my sig it has some good build advise in it.

I use a twisted 32 3/4 with a jack frost and a petar k build on #400 mesh I rarely get the top hotspot doing this.

 

[grruss]

And I bought some wedding rings this evening.. https://www.tanga.com/deals/4b13d6737d/light-tungsten-ring-with-silver-dragon-inlay

NICE! WTG, Fisty!

 

[ATX]

Why don't you have him walk you through setting it up on your own? My fiance is scared to wrap his own coils, it drives me crazy.

The Breast Cancer Awareness LE is designed and rendered, waiting in Face's PM box for his approval.

And I bought some wedding rings this evening.. https://www.tanga.com/deals/4b13d6737d/light-tungsten-ring-with-silver-dragon-inlay

Very nice rings indeed. I love tungsten and tungsten carbide rings. I have two and they are always perfectly shiny and flawless. How cool would a tungsten carbide iHy be?!?! For the small, small fee of $1,000 I'm sure lol. Would prolly' weigh 4 pounds too, but it sure would be impressive!

 

[NancyR]

Why don't you have him walk you through setting it up on your own? My fiance is scared to wrap his own coils, it drives me crazy.

The Breast Cancer Awareness LE is designed and rendered, waiting in Face's PM box for his approval.

And I bought some wedding rings this evening.. https://www.tanga.com/deals/4b13d6737d/light-tungsten-ring-with-silver-dragon-inlay

Very nice Fisty!!!!! Can't wait to see the rendering

 

[goldcoastmat]

And I bought some wedding rings this evening.. https://www.tanga.com/deals/4b13d6737d/light-tungsten-ring-with-silver-dragon-inlay

Nice fisty, grats!

going to get some sleep, see you guys in the morning.