I'll be getting mine Monday so I'll PM you if it does/doesn't and post pics in this forum.
Update: I just got word from them that they are made by Kebo
Last edited:
- Status
I'll be getting mine Monday so I'll PM you if it does/doesn't and post pics in this forum.
Update: I just got word from them that they are made by Kebo
So far, I absolutely LOVE this atty clone! I have one minor issue. There is a gap between the atty and the top of my Vamo V2. How do you folks fix this? Is something adjustable here that I am missing to close this gap? This is a purely aesthetic issue. I am thinking of making a stainless steel "washer" machined to the correct size to make it look complete. I have a vertical mill and a lathe in my shop to produce this part if needed. 
I have the v3 of the Russian 91 by Kebo and bought from My Baker Vapor. It has the extra piece tho use your own drip tip and the 510 connection is adjustable with a screw. There was already an o-ring around that screw when it arrived. I don't know the difference between the v2 and v3. I know someone with a v2 and they look identical.
Sent from my VS980 4G using Tapatalk
Sent from my VS980 4G using Tapatalk
Getting my version 3 today from them as well
Sent from my SCH-I535 using Tapatalk
I do this for all of my tanks. 
Purchase a DC Tank Adapter
screw the tank adapter, onto the EGO threads on the VAMO, leaving it higher than the top of the MOD This will keep the tank sturdy on top of the device, and also prevent you from screwing any tank too far down.
Purchase a DC Tank Adapter screw the tank adapter, onto the EGO threads on the VAMO, leaving it higher than the top of the MOD This will keep the tank sturdy on top of the device, and also prevent you from screwing any tank too far down.So i just got my Russian today. Its v3 andi noticed the fill hole doesn't have a "seal" on it. Like i can just stick my blunt tip needle in it, really far, and fill. Soo i guess that gets rid of any leaking issues. Other than that, I'm loving it. Got a 1.6 ohm micro in there with some organic cotton. Oh and I'm vaping some of that unicorn blood too.
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
U use one of the extra orings for my fill hole for extra protection
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
.....I am vaping the "chimney" coil like Rip Tripper shows how to do on YT. Works fantastic in my Russian atop my Vamo. If you all have not tried this, you need to! 
Chimney Micro Coil Build In A Kayfun Lite - YouTube
Chimney Micro Coil Build In A Kayfun Lite - YouTube
does anyone know what type of plastic the middle tank section of an authentic Kebo Russian 91% is? is it polycarbonate?
There is a juice I have had before (banana/white chocolate/coconut)... actually "invented it" for a contest High Desert Vapes was hosting here on ECF. Recently in the product description they added a warning that this flavor will react with polycarbonate tanks and PET bottles. I haven't ordered this juice since before I got the R91%. The last time I vaped it was in a CE3 clearomizer, and it didn't give me any problems in those. I believe CE3's are polycarbonate but I could be wrong.
There is a juice I have had before (banana/white chocolate/coconut)... actually "invented it" for a contest High Desert Vapes was hosting here on ECF. Recently in the product description they added a warning that this flavor will react with polycarbonate tanks and PET bottles. I haven't ordered this juice since before I got the R91%. The last time I vaped it was in a CE3 clearomizer, and it didn't give me any problems in those. I believe CE3's are polycarbonate but I could be wrong.
They are available from All About Vapor, https://www.allaboutvapor.com/vaporshop3/product.php?productid=18066.
I kind of had an aversion to the metal tank at first. It seems so convenient to be able to see the liquid. But it's not bad at all. I use the steel center tank for all my juices considered to be caustic to plastic in two dedicated 3.1 clones, for the others, normally the plastic tank in a Russian.. After awhile you can tell when it's almost dry the draw gets slightly tight and flavor starts to get muted. At 3-4 mls though a tank will last most people an entire day.
I've had my mtank (actually a centuri clear tank) with many kind of juices like citrus and 0 cracks. Only fine scratches on the outside from wear n tear
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
what tank is that? is it completely clear, as opposed to the mtank's that are "frosted" like the stock r91% middle section?
Coolvape http://coolvape.com/products/kayfun-clear-tank-by-centuri
Its a really nice clear tank. I'm surprised they sold out though. They have a warning that it may crack with certain juices but who doesn't. Like I said 0 cracks.
Sent from my Nexus 5 using Tapatalk
Last edited:
i love my russian 91 by kebo....i took me a few builds to get it down 3 time was it now its working good ...i use cotton and the term...less is more worked for me..i gotta .98 micro on a 1/16 bit runnin on my provari mini....awesome
i need another R91 but there sold out....again
i need another R91 but there sold out....again
- Status
Similar threads
