Ah was für ein Atmen der frischen Luft! Those germans and their amazing engineering are at it again, if this setup pulls through it will probably force the industry to step it up technology wise, this is a mod and vaporizer designed into one unit. Jungen und Mädchen I give you the TA-EW Nubulizer, which will probably eliminate alot of "oldschool" 
rolleyes vaping necessities like wicks, the need to drip, and other negatives like burning cotton or the trade-off between vapor and convenience.
It's a really fairly simple and obvious design that most of us have already imagined, just not how exactly to implement it, I know it resembled my dream future vaporizer (sorry nebulizer). It gets me all giddy on the inside and I'm stalking this thing to pre-order a stainless one (which will run you 180 euros, aluminum at 140, and carbon fiber at 600...no thanks I'll wrap it in carbon myself for that much, and it'll look similar). I was looking up mod patents when I came across this at TA-EW Nebulizer - Newsforum - Germanvapers which was all in german, but luckily I can translate german like an average six year old and got about halfway through when I remembered google translate (if you open it in chrome it's built in, which made it much easier to figure this thing out), and figured out how it works.
Basically it's a 26650 mod (that looks beautiful to me reguardless of features) that uses a vaccuum generated by you sucking on the drip tip, to draw you liquid to a wickless coil, from a built in metal e-liquid reservoir (it's like bottom feeders but cooler!). This is the part that somewhat confused me but I think I understand, they say the vaccuum drawing technique is "zugsensitiv" which is literally "train/sensitive", and going by the rest of the article it sounds like when you suck on the drip tip, it also participates and manages the sucking and "evens it out" so it will work properly (sounds a little too good to be true but here's to hoping) and transport it to a "cyclone" air turbulence (kinda like those ....s that have angled airholes and cyclone the smoke to the mouthpiece, I don't smoke anymore in case your wondering) that sputters it to the wickless coil. Asthma inhalers (nebulizers) work the same way, it basically mists the ejuice straight to the coil so the teeny tiny droplets probably get vaporized immediately, sounds pretty sci-fi sweet to me. Sounds amazing to me, basically a built in inhaler that "sprays" liquid on you wickless coil depending on your inhaling tensile strength, if they can get this to work properly without too many problems I think this will be a cloud chasers absolute dream, the german vapor site estimated that the theoretical evaporation rate could be around 22.71 ml./min. which sounds insane as that is a little over 1/3 of a ml per second! Sounds suffocatingly awesome!
Here's some of the features that they are thinking it will have, and they almost sound cooler than the nebulization technique itself!
-26650 battery, or stacking as another option.
-A gorilla glass touchscreen that displays: voltage, watts, battery level, JUICE level (that's cool), and CONDITION OF YOUR COIL.
-A new electronic unit (chip) that's designed specifically for it alone (finally a different chip, I'm personally mad that both an expensive provari, and a bargain vamo have the same identical chip).
-Finally a variable wattage output (in .5 increments) of up to 55 watts.
***I've encountered alot of...negative nancy's today for lack of a better word, so please don't add to that. By all means speak your mind, but if all you want to do is unconstuctively criticize this patent, or bash on the idea...don't. Otherwise I hope your as excited about this as I am! Finally an all-in-one mod/vaporizer, that can hold it's own juice, has a purdy button and touchscreen, and can (hopefully) out-vape the RDA's! I'm trying to get more info on facebook about this idea, and how to get on a waiting list for those interested, I just need to brush up on my German a little!***
Vape on y'all, guten tag!
rolleyes vaping necessities like wicks, the need to drip, and other negatives like burning cotton or the trade-off between vapor and convenience.It's a really fairly simple and obvious design that most of us have already imagined, just not how exactly to implement it, I know it resembled my dream future vaporizer (sorry nebulizer). It gets me all giddy on the inside and I'm stalking this thing to pre-order a stainless one (which will run you 180 euros, aluminum at 140, and carbon fiber at 600...no thanks I'll wrap it in carbon myself for that much, and it'll look similar). I was looking up mod patents when I came across this at TA-EW Nebulizer - Newsforum - Germanvapers which was all in german, but luckily I can translate german like an average six year old and got about halfway through when I remembered google translate
(if you open it in chrome it's built in, which made it much easier to figure this thing out), and figured out how it works.Basically it's a 26650 mod (that looks beautiful to me reguardless of features) that uses a vaccuum generated by you sucking on the drip tip, to draw you liquid to a wickless coil, from a built in metal e-liquid reservoir (it's like bottom feeders but cooler!). This is the part that somewhat confused me but I think I understand, they say the vaccuum drawing technique is "zugsensitiv" which is literally "train/sensitive", and going by the rest of the article it sounds like when you suck on the drip tip, it also participates and manages the sucking and "evens it out" so it will work properly (sounds a little too good to be true but here's to hoping) and transport it to a "cyclone" air turbulence (kinda like those ....s that have angled airholes and cyclone the smoke to the mouthpiece, I don't smoke anymore in case your wondering) that sputters it to the wickless coil. Asthma inhalers (nebulizers) work the same way, it basically mists the ejuice straight to the coil so the teeny tiny droplets probably get vaporized immediately, sounds pretty sci-fi sweet to me. Sounds amazing to me, basically a built in inhaler that "sprays" liquid on you wickless coil depending on your inhaling tensile strength, if they can get this to work properly without too many problems I think this will be a cloud chasers absolute dream, the german vapor site estimated that the theoretical evaporation rate could be around 22.71 ml./min. which sounds insane as that is a little over 1/3 of a ml per second! Sounds suffocatingly awesome!
Here's some of the features that they are thinking it will have, and they almost sound cooler than the nebulization technique itself!
-26650 battery, or stacking as another option.
-A gorilla glass touchscreen that displays: voltage, watts, battery level, JUICE level (that's cool), and CONDITION OF YOUR COIL.
-A new electronic unit (chip) that's designed specifically for it alone (finally a different chip, I'm personally mad that both an expensive provari, and a bargain vamo have the same identical chip).
-Finally a variable wattage output (in .5 increments) of up to 55 watts.
***I've encountered alot of...negative nancy's today for lack of a better word, so please don't add to that. By all means speak your mind, but if all you want to do is unconstuctively criticize this patent, or bash on the idea...don't. Otherwise I hope your as excited about this as I am! Finally an all-in-one mod/vaporizer, that can hold it's own juice, has a purdy button and touchscreen, and can (hopefully) out-vape the RDA's! I'm trying to get more info on facebook about this idea, and how to get on a waiting list for those interested, I just need to brush up on my German a little!***
Vape on y'all, guten tag!
hahaha
