- Status
Have they changed their trade-in trade-up policy? I didn't try after reading oldblue's post below -- but maybe they've changed their policy? Or am I just confused again 
I'm not sure what the "Official Rules" are now, but I know the spirit of the trade in program is to help out people who bought crappy mall ecigs, or got jammed on a Blu, etc... It seems a little bit wrong for us 1%ers to be using the program to buy multiple Vmods for ourselves.
Got my replacement chassis today(with replacement seals). Will be vmodding tomorrow. Life is good.
@KAT
Sorry but it really did only take me about 2 minutes to install the catch cup
And I must say I was vaping along very happily til I needed to change batt and saw that there was still leaking coming out of the top getting my atty all wet Then I saw the post here about how we needed to throw away the preinstalled o-ring that came in the chassis and put in the other one that came in the bag of seals
I was really thinking like what good is that going to do they look the same to me, until I took it out of the bag and placed them side by side and though it is a small difference there is a difference in the size of the 2 and the one in the bag seems to fit tighter to the atty SO now all is good and I am vaping happily again
And blowing clouds of vapor too
Oh and as for the 6volt vaping on this mod I have tried it with the 2.8 ohm silo and I must say I like the extra punch it gives but I am still not a big fan of the silos so I am going to wait till I get some money and try ordering the Hybrid atty instead, cause I think I may like it more
Sorry but it really did only take me about 2 minutes to install the catch cup
And I must say I was vaping along very happily til I needed to change batt and saw that there was still leaking coming out of the top getting my atty all wet
Then I saw the post here about how we needed to throw away the preinstalled o-ring that came in the chassis and put in the other one that came in the bag of seals I was really thinking like what good is that going to do they look the same to me, until I took it out of the bag and placed them side by side and though it is a small difference there is a difference in the size of the 2 and the one in the bag seems to fit tighter to the atty SO now all is good and I am vaping happily again And blowing clouds of vapor tooOh and as for the 6volt vaping on this mod I have tried it with the 2.8 ohm silo and I must say I like the extra punch it gives but I am still not a big fan of the silos so I am going to wait till I get some money and try ordering the Hybrid atty instead, cause I think I may like it more
Trying a modded slit BOGE 2.0. Doing Just "OK", but can't wait to try the new chassis and 1.8 silos for hopefully more taste and warmth. Hoping by this weekend.
intriqken, I did love my one day with the 14250s. I used them with the standard 2.8 Silo and it was delightful... sigh. The batts last far less time that with the 14500s. (prolly about 1/2 the time)
Tea, throw out a perfectly good O-ring? LOL! Ok, if you say so (but I'm going to save it just in case...).
Yeah, vikki! A leakage-free Vmod!
mAh mAh mia...
Yeah, baby!!
Tea, throw out a perfectly good O-ring? LOL! Ok, if you say so (but I'm going to save it just in case...).
Yeah, vikki! A leakage-free Vmod!
I think you meant (Mah)
mAh mAh mia...
Yeah, baby!!
@KAT
Sorry but it really did only take me about 2 minutes to install the catch cup
Holy crap! A 1.5 vs 2.0 is night and day!
More flavor, more vape...
Only con... Juice hog. Worth the trade off for sure. I'll do a video review soon.
More flavor, more vape...
Only con... Juice hog. Worth the trade off for sure. I'll do a video review soon.
Well, waited quite a while to order my Vmod. Watch Grim's review about all the leaking and decided to wait. Saw that there was a new chasis made and no one was complaining of leaks, so I ordered one...
About 3 hours reading through this thread. Proper feed techniques galore. Testing all 4 of the silos I have, and also the 2 Hybrid attys I bought with it. All Leak. Check the two seals on each of the cartos and attys: all there. Only thing I see people talking about is a seal kit. There were no extra seals in my order, but I figured I had the "New chasis" so didn't need them.
I'm spending more time washing my hands then I am vaping. Out of all the mods I have purchased, never had one leak this bad. How did this thread get to 205 pages on a mod that leaks so bad?
About 3 hours reading through this thread. Proper feed techniques galore. Testing all 4 of the silos I have, and also the 2 Hybrid attys I bought with it. All Leak. Check the two seals on each of the cartos and attys: all there. Only thing I see people talking about is a seal kit. There were no extra seals in my order, but I figured I had the "New chasis" so didn't need them.
I'm spending more time washing my hands then I am vaping. Out of all the mods I have purchased, never had one leak this bad. How did this thread get to 205 pages on a mod that leaks so bad?
Try vaping it without the cover to see why its leaking.Im sure its something simple.
It was a little tricky before the new chassis & seals, but I've had zero leaks since I got the updated parts. It doesn't sqonk like other feeders, so you gotta start over when learning the Vmod. This is evidenced by how quickly newbs are picking it up versus bottom feeder vets.
I have seen,(leaking) when bottle is not screwed in right, like tight but not over tighting it.
and you only need pump bottle (2 quick pumps), like barely pushing in on bottle, not over pumping it.
and you only need pump bottle (2 quick pumps), like barely pushing in on bottle, not over pumping it.
Good Morning fellow vmodians ... . I must say that after vaping my lil heart out last nite, (yep I even took it to bed w/me so I could midnite vape) and vaping this a.m so far, NO LEAKAGE and I actually tried to over feed it a couple of times... That new fatter big o ring really does the trick. Well that and all of the other fixes, but that is the one that I know makes a diff. Just a thought tho, they should put in directions to get rid of the stock o ring in there . Wait maybe they did, I wouldn't know since half of my instructions were cut off ... What a glorious day!! Coffee, vmod, vmod, coffee, fellow vmodians
. I must say that after vaping my lil heart out last nite, (yep I even took it to bed w/me so I could midnite vape) and vaping this a.m so far, NO LEAKAGE and I actually tried to over feed it a couple of times... That new fatter big o ring really does the trick. Well that and all of the other fixes, but that is the one that I know makes a diff. Just a thought tho, they should put in directions to get rid of the stock o ring in there . Wait maybe they did, I wouldn't know since half of my instructions were cut off ... What a glorious day!! Coffee, vmod, vmod, coffee, fellow vmodians 
mAh mAh mia... thanks kat --- I get lazy & can also be typo queen!
Stownz --- Call and ask for a seal kit. It will also have the "looks like a cut off condom" catch cup.
Condoms are good for protection.
I don't know if any kits have the new seals installed yet --- but all buyers of the new kits were to be sent seal kits automatically and some were by separate mailing. Check your junk mail for something from Spark Industries.
Stownz --- Call and ask for a seal kit. It will also have the "looks like a cut off condom" catch cup.
Condoms are good for protection.
I don't know if any kits have the new seals installed yet --- but all buyers of the new kits were to be sent seal kits automatically and some were by separate mailing. Check your junk mail for something from Spark Industries.
Stownz did you wipe the atty off before you took the pictures cause it doesn't look wet . When mine would leak it was from the large gasket letting juice pass and getting the atty all wet and running all over the chassis. If the atty was dry I would say the leak was from somewhere other than the seals. When I got the new chassis and seals I put the large gasket in my old chassis and now I have two that don't leak at all .
Greetings you all-
From time to time I have noticed that folks seem to have a problem with leaking and I just wanted to take a second and share the fact that you can feed your atomizer or cartomizer with out ever touching the bottle by taking primer draws. Not at all the ideal way to use the Vmod but even the cartomizers will feed in this way. Myself I like the atomizer which did seem to be a bit prone to over feeding (user eror on my part due to many ML. of juice with out leaks) but with the new chassis seems very solid so far. I do not know if it is the bottom gasket or what. The leaking on the chassis in the pictures above seem to be from over feeding and a need to install the catch cup. Once you learn to become one with the Vmod all things are clear.
From time to time I have noticed that folks seem to have a problem with leaking and I just wanted to take a second and share the fact that you can feed your atomizer or cartomizer with out ever touching the bottle by taking primer draws. Not at all the ideal way to use the Vmod but even the cartomizers will feed in this way. Myself I like the atomizer which did seem to be a bit prone to over feeding (user eror on my part due to many ML. of juice with out leaks) but with the new chassis seems very solid so far. I do not know if it is the bottom gasket or what. The leaking on the chassis in the pictures above seem to be from over feeding and a need to install the catch cup. Once you learn to become one with the Vmod all things are clear.
- Status
Similar threads
