the Vmod

[tierrataz]

I got a shipping notice, no tracking # though.

 

[keyzygirl]

Thanks guys!The Reo is just way out of my budget and this seems like a viable option for me.My birthday is in 2 days and Im hoping we can swing it to buy me a gift.I may have to wait for a while yet but this seems like a good choice to finally try a feeder mod.Thanks for all the info.

 

[strprswpr]

Yes and no.

I'll tell you why not first. Build quality comes no where close to a reo, bottom line. Your not gonna be able to throw this thing across a room, drop it a lot, or run over it. How long the plastic chassis will hold up is yet to be determined. Will they offer parts like that? If they do, I would change my mind. But $60 (with current code) versus $139, well it's going to appeal to a lot of vapers there alone. It uses proprietary catos/attys which is a plus and a minus depending on your view.

Yes, I like it better than my reos because;
1- I am getting the best and most flavorful vape off the hybrid attys on this device, BAR NONE. Tried it again on a grand last night....meh. They were designed for this feed system though work well on other pvs.
2-price point
3-same mechanical operation and ability to wash out.
4-fire pin has a bigger contact surface and I find the hits off a 14500 much more satisfying.
5-just as compact as a mini, but with the rounded edges, much more comfortable to hold and operate.
6-The pairing of the vapage hybrid atty to it's native device is da BOMB!

I'd make a suggestion if you already have a BF. Get a couple of hybrid attys to try for yourself. See if you like them first. If you do, you really need to try them on the Vmod. It will knock your socks off.......nuff said.

I couldn't agree more. This mod has changed vaping for me. I'd hate to say it, but if I master this mod which I'm sure I will. I will be using this more than any of my other mods. Lastly, If they come out with a 5 volt or a VV.....Every other PV maker will be in a lot of trouble.

 

[strprswpr]

Yes and no.

I'll tell you why not first. Build quality comes no where close to a reo, bottom line. Your not gonna be able to throw this thing across a room, drop it a lot, or run over it. How long the plastic chassis will hold up is yet to be determined. Will they offer parts like that? If they do, I would change my mind. But $60 (with current code) versus $139, well it's going to appeal to a lot of vapers there alone. It uses proprietary catos/attys which is a plus and a minus depending on your view.

Yes, I like it better than my reos because;
1- I am getting the best and most flavorful vape off the hybrid attys on this device, BAR NONE. Tried it again on a grand last night....meh. They were designed for this feed system though work well on other pvs.
2-price point
3-same mechanical operation and ability to wash out.
4-fire pin has a bigger contact surface and I find the hits off a 14500 much more satisfying.
5-just as compact as a mini, but with the rounded edges, much more comfortable to hold and operate.
6-The pairing of the vapage hybrid atty to it's native device is da BOMB!

I'd make a suggestion if you already have a BF. Get a couple of hybrid attys to try for yourself. See if you like them first. If you do, you really need to try them on the Vmod. It will knock your socks off.......nuff said.

I couldn't agree more. This mod has changed vaping for me. I'd hate to say it, but if I master this mod which I'm sure I will. I will be using this more than any of my other mods. Lastly, If they come out with a 5 volt or a VV.....Every other PV maker will be in a lot of trouble. If this company Vapage has any sort of staying power I can only see improvement in the future.

 

[tierrataz]

If they would make a 18650 Vmod that would cover 5V & 6V options as well. That is what I would like to see them do. I see a lot of posts about vapers not liking or utilizing the higher voltages VV can provide. BTDT. As far as regulating the vape, I can tell PDQ when my batts are just under 3.9V and need to be changed.

I couldn't agree more. This little mod is a game changer! Let's hope Vapage runs with it.

I couldn't agree more. This mod has changed vaping for me. I'd hate to say it, but if I master this mod which I'm sure I will. I will be using this more than any of my other mods. Lastly, If they come out with a 5 volt or a VV.....Every other PV maker will be in a lot of trouble. If this company Vapage has any sort of staying power I can only see improvement in the future.

 

[tierrataz]

Gonna pass on a tip. The directions tell you to wash this thing out. I did....once. I was continually finding weeping inside on the bottle side and thought I just needed to fine tune my take on AG's instructions. Last nite I washed it out good with soap & warm water then left it to dry overnight. This morning I am on it for 3 hours now and no weeping at all. I can't explain why but appears to be very important in the maintenance and function.

 

[strprswpr]

weeping. i don't understand?

 

[Katdarling]

SS and t-taz, you, along with AG, are so incredibly helpful here, and providing a ton of information that is so important for people who are just getting the Vmod or deciding to get one.

Thank you (on behalf of all of us)!

 

[strprswpr]

This mod is the ATTY MOD FOR DUMMY'S....If I figured it out, anyone could. I wanted to learn how to use atty's so bad but never could. Now I'm the Atty King. All praise The King.

 

[AlmightyGod]

So Damn Sexy!!!

Only $60...Free Shipping!!!

Don't forget to buy a couple of Hybrid Bottom Feeder Atomizers too!

Code: barfly

 

[strprswpr]

I got the silver.....I might just get another in black.

 

[strprswpr]

I emailed Grimmgreen about this mod. Maybe he'll do a review.

 

[tearose50]

A bit of moisture --- a small amount of liquid leak or condensation build up inside the mod. I'm sure you've seen it!

weeping. i don't understand?

 

[tierrataz]

Little droplets or smears of fluid on the chassis and inside the shell. No obvious point of origin. Just there. I know I had the bottle snugged i enough and I was over zealous feeding at first, but this continued as I fine tuned my technique. A nice and thorough cleaning and I am golden

weeping. i don't understand?

 

[ejoker]

 

[keyzygirl]

They are both very pretty.It sounds like an awesome mod.

 

[Katdarling]

Happy early B-day, keyzy. Hope you get one!


ej, great pic! May I have the one in the middle, please?

 

[MiMoSeTH]

Since it seems it flew over all, and i think it's pretty nice to have extras...

Well, looks like i've found extra bottles for our beloved Vmod.
These 3ml bottles arrived today from TPA. Threading is obviously different, but they move in fine and stay in place. After 5 hours of regular use, the only leak happened when i took it out, and not a really a leak, just a few drops on the thread.

On the left, TPA 3ml bottle with dropper and cap. Vmod included bottle on the right

TPA bottle inserted in my Vmod.

 

[AlmightyGod]

Since it seems it flew over all, and i think it's pretty nice to have extras...

Nice find!

 

[tearose50]

Since it seems it flew over all, and i think it's pretty nice to have extras...

Glad you are having success with them. I wasn't so lucky my first attempt---but that was before I stopped overfeeding. Will try again!

I have those bottles you found as some juice suppliers use them for their sample size---usually says "3 mil bottle".