I got my Hades mod today and was so excited to use it. I found out that one of the magnets was busted in half. =(
No Bueno!
My work around is simple - Ditch the magnets and use a spring. I temporarily used one from a flashlight but it wasn't cutting it.
So I went to Lowe's and found compression springs 23/32" x 3-1/2" x .041" for $4 and change.
In the picture, I show where I cut the spring as a starting point.
It wasn't bad but I needed it more sensitive so I cut about 1/2 of a ring.
I applied dielectric grease to the ends of the spring and on the shaft.
The trigger is smooth like butter and fires like a beast! =D
Btw, I used Noalox on all the threads.
"Be Calm And mod On!" =D
No Bueno!
My work around is simple - Ditch the magnets and use a spring. I temporarily used one from a flashlight but it wasn't cutting it.
So I went to Lowe's and found compression springs 23/32" x 3-1/2" x .041" for $4 and change.
In the picture, I show where I cut the spring as a starting point.
It wasn't bad but I needed it more sensitive so I cut about 1/2 of a ring.
I applied dielectric grease to the ends of the spring and on the shaft.
The trigger is smooth like butter and fires like a beast! =D
Btw, I used Noalox on all the threads.
"Be Calm And mod On!" =D
