I received my new Trident Grand Vapor yesterday, and had to totally mod it as it didn't fit together correctly. I also had to drill a 3/32 hole opposite of the existing hole in the base as there was no option for 2 vent holes, also ground the edges of the base to bevel it as well so the cover would fit, not impressed at all. The screws on the stands also suck, loose/flimsy and come off when barely unscrewing, and liquid leaks out if the vent holes over 10 drips, I regret this purchase, but was cheap enough. Ordered a Nimbus, looked like a better quality piece, so far my IGO-W is the front runner.
Trident Grand Vapor
- Thread starter RCH69
- Start date
- th_trl_thread_readers 0
- Status
I have a trident clone and if you twist the top cap you can either have 1 or 2 holes depending if you have 1 or 2 coils.
I like mine at 0.57 dual coil and can put a few drops in no leaks.
Check this post for more info and hope you get a good vape from it.
http://www.e-cigarette-forum.com/fo...r-systems/422845-trident-rda-grand-vapor.html
I like mine at 0.57 dual coil and can put a few drops in no leaks.
Check this post for more info and hope you get a good vape from it.
http://www.e-cigarette-forum.com/fo...r-systems/422845-trident-rda-grand-vapor.html
Well apparently a freakin cheap clone after looking at these pics, and just now getting home from local vape shop and inspecting the one they had. Way better construction than the one I bought, live and learn, no biggie, will test drive new Nimbus in a couple of days and report back.
Would you mind sharing what shop this was (just to satisfy my own curiosity, thanks)?
- Status
Similar threads
- Locked
