I just got the tugboat V2 what coil do yall suggest for best flavor
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Tugboat v2
- Thread starter rcthompson0409
- Start date
- th_trl_thread_readers 0
- Status
Is this your first rda?? If not, what did you build on before?? Where did you build at on it??
I had an igo w before and it was ok I'm still kinda new at coil building.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
How low you plan on going with ohms? I probably wouldn't use anything lower than 24 gauge kanthal a-1
If on mechanical mod, go for a dual twisted 28 gauge micro coil 4/5 wraps at around .2-.3 ohms. If on regulated do a simple dual 28 gauge micro coil with 8-10 wraps for a resistance around 1 ohm. At least that's what I've enjoyed on my Tugboat clone.
I don't really want to try sub ohm yet. Thanks for the input rice burner
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I keep my Tugboat v2 builds around between .3 to .5 with basic dual micro coil setup. I used a different drip tip for better flavor. The drip tip that it came with didn't do much for me so I switch it out with longer drip tip and little bit narrower. I also closed off one of the holes for more intense flavor.
I think you can still get nice cooler but intense vape between .8 and 1.2 ohm.
I think you can still get nice cooler but intense vape between .8 and 1.2 ohm.
Do mechs perform better at subohm resistances safely
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
IMHO, I think regulated high wattage power devices that can handle lower resistance builds are more safer (coming from a guy who owns several mechs).
With the right education in mechs (cleaning, maintenance, etc), battery safety, Ohm's law in relation to resistance, amps, volts, etc, a mech mod can be used safely. But remember with mechanic mod, you vapor production diminishes as the battery drains and with regulated device you keep constant power.
High power regulated devices are getting cheaper and cheaper where there isn't much of price difference these days. If you really want a mech, just be sure to educate yourself on points I made.
Here is good read from old forum legend Baditude on mechs/RDA (you don't have to same mech, RDAs etc).
http://www.e-cigarette-forum.com/forum/blogs/baditude/6589-15-inexpensive-mechanical-mod-rda-setup.html
- Status
Similar threads
