UD AGT opinions ??

[Elfsong]

The UD AGT rba. Anyone use this? AGT Titanium Rebuildable Atomizer - Phiniac Rugged Pyrex Glass Tanks
Looks nice, its small, its titanium. I'm Building a small dna mod and am looking for a smaller pryex RBA to mate to it. Don't like anything to big so i thought this might work. Not looking for huge clouds just smallish and rebuildable. I found one on ebay for 24. Thinking real seriously bout getting it. Thoughts, reviews, other recomendations?

 

[Gonzi]

I have one that I use every once in a while on top of my Bagua 14500 clone. The wick hole is very tiny and so is the fill hole, making it a pain to get to wick right. Thin juices are easier to work with in this thing because they aid in avoiding vapor lock in the tank, which can be a problem even with the fill hole out. Keep in mind that this thing is super small, so you'll run the tank dry super quick, specially if your thinking about running it on a DNA. If you have the patience for it, give it a try. There have been times where I've wanted to just throw it against the wall, but other times where I really enjoy it.

Best wicks for it for me have been both SS cable with ekowool on top, and just a straw SS wick set up Peter K style.

 

[Kemosabe]

i have one and use it often. i have found that 1/16" SS cable is the best way to set it up. mesh sleeve under the cable. its leightweight and looks great on my provari or my KTS/Chi-Chi mech. tank is only 1ml but i dont find that a problem as ive usually got a needle bottle with me anyway. wick hole is small like mentioned above, but its the perfect size for 1/16" cable. and 1/16" cable is one, if not the, easiest size to find- especially locally. ive even set it up using the slightly smaller fill hole for the wick. thats how well the cable wicks. never a dry hit. i think using the bigger hole for air helps but probably only makes a slight difference, if at all.

i use 65/35 juice in mine ftr.

great flavor from this atty with its tiny chamber and moderate sized air hole.

be patient with the top leg, but im sure you already knew that.

theres an ECF thread on the AGT. maybe ECF's search feature will find it, maybe not LOL. (i sure wish the search tool here was powered by google, but hey thats a rant for another time).

$24 is a great price for this atty btw. i paid a few bucks more for mine ($30 i think) and some vendors still have this puppy for like $50.

 

[Elfsong]

Good tip on the ss cable. I'm planning on running lower watts for now so hopefully wicking won't be too much of an issue. I'm building a really small (3 1/2 x 7/8 x 1 13/16) pocket mod so size/weight is probably my biggest concerns. I do tend to lean more towards PG (60/40 or 70/30) so hopefully that helps with wicking.


Here's what it's eventually going onto.

 

[Kemosabe]

Good tip on the ss cable. I'm planning on running lower watts for now so hopefully wicking won't be too much of an issue. I'm building a really small (3 1/2 x 7/8 x 1 13/16) pocket mod so size/weight is probably my biggest concerns. I do tend to lean more towards PG (60/40 or 70/30) so hopefully that helps with wicking.


Here's what it's eventually going onto.

youll be golden with lower watts imo. ive got mine set up to 1.3Ω, so moderate amount of watts on a mech and it performs flawlessly. this atty is indeed small and light so i think youll like it.
nice looking housing for your diy project

 

[Gonzi]

Like Kemo said, should be a perfect match. It is def small and super lightweight, and at low watts mixed with high PG, wicking should be an issue. I normally run it around 1.3 as well, since I run it on a 14500 IMR, lowest I've ever taken it is 1.1ohms.