UD Bellus

[isux]

hmm can the coil touch the deck? i was trying to make it 'float' by not touching the airhole and not touching the deck.. sigh

you say leh... ?

 

[MVP0108]

This is my setup


Sent from my lovely vape heaven

 

[isux]

This is my setup


Sent from my lovely vape heaven

There's space for your coils to go closer to the posts. Not touching, but closer. One of them looks okay, the other looks a bit far out. Crimp a little and push closer can already

 

[vaporado]

This is my setup


Sent from my lovely vape heaven

dual coil 24awg 7wrap brings it to how many ohm? you vape at what watt?

 

[MVP0108]

Im using 26 awg i think 8-9wraps around .6ohm vaping at 25 watts to 30 watts


Sent from my lovely vape heaven

 

[R_u_mine]

Itchy hands can't wait to set them up!

 

[seraphe]

I find 26g harder to coil nicely and stay in shape.

 

[KenshinAdryan]

Itchy hands can't wait to set them up!

Red matches the black nicely...

 

[ezjayy]

Itchy hands can't wait to set them up!

Your mod very naise.

 

[Karstine]

Paging @cloudysheep
Reason: Want to build verticle coil on bellus but I have only some vague idea how.

you think the two above are feasible? How do you think you will go around doing verticle coil in bellus?

 

[Ninthsine]

Anyone tried doing dual vertical on the bellus yet?

 

[isux]

can be doable. but limit on the no. of coils since you're more likely to be limited by the height than the width of the RDA deck (aka. not touching the chamber sides to prevent short).

 

[Karstine]

can be doable. but limit on the no. of coils since you're more likely to be limited by the height than the width of the RDA deck (aka. not touching the chamber sides to prevent short).

thanks! But coiling is no problem. It's the wicking part that I'm unsure of.

 

[cloudysheep]

Paging @cloudysheep
Reason: Want to build verticle coil on bellus but I have only some vague idea how.

you think the two above are feasible? How do you think you will go around doing verticle coil in bellus?

If it were me, I'd prob do the 'y' wicking, but the cotton needs to be perfect really perfect amount, otherwise there world be too much in the coil or too little in the channels.... Aiyah why never think of this yesterday, I just serviced and rewicked the Bellus yesterday... =/

 

[Karstine]

If it were me, I'd prob do the 'y' wicking, but the cotton needs to be perfect really perfect amount, otherwise there world be too much in the coil or too little in the channels.... Aiyah why never think of this yesterday, I just serviced and rewicked the Bellus yesterday... =/

paiseh, this one on behalf of @Ninthsine anything you scold him only haha!

And your diagram sibei power @cloudysheep Really helps in visually coil build especially when i use paint.exe or what haha!

 

[Comrade Vape]

If it were me, I'd prob do the 'y' wicking, but the cotton needs to be perfect really perfect amount, otherwise there world be too much in the coil or too little in the channels.... Aiyah why never think of this yesterday, I just serviced and rewicked the Bellus yesterday... =/

Ok

 

[Ninthsine]

Ok done alr. Like finally. I did the wicking that was posted by @Karstine the diagram on the left. Was a real pain in the a** but was worth the time since i was bored. Airflow much less restricted than horizontal build. Flavour a little more pronounced, cloud wise more or less the same. But a lot more leaks during initial filling up of tank. Other than that i can say its not that bad.

 

[Comrade Vape]

Ok done alr. Like finally. I did the wicking that was posted by @Karstine the diagram on the left. Was a real pain in the a** but was worth the time since i was bored. Airflow much less restricted than horizontal build. Flavour a little more pronounced, cloud wise more or less the same. But a lot more leaks during initial filling up of tank. Other than that i can say its not that bad.

Just consign yourself to a future of bottom-filling my son.

 

[Ninthsine]

Just consign yourself to a future of bottom-filling my son.

Yea. Will do, i totally forgot about bottom filling haha

 

[Ninthsine]

Ok initially fitting the coils perfectly aligned was moderate, after that was tweaking the hotspots which is normal. Hardest of this all imo is the wicking. Had to fit a whole lot of cotton bcos i did it the inverted 'y' style. The coils would just move around when i was pulling the cotton so i had to align them perfectly to sit right at the airflow again. Not knowing whether to leave how much cotton on the top i just left some there. But yea after that i just put some juice in and voila, my dual vertical coil build on my bellus