UFS O-Rings

[Aal_]

I am a bit mixed up with the UFS O-Rings. Questions:
1- Upper Sleeve came without o-ring. I thought all metal parts require o-rings, does this make sense?
2- on GG Wiki it says that the center tank takes 2 orings top and bottom which is nice but it says they are of different sizes?? 16.5 and 17.5 i guess? Why is that? (I know the plastic one doesn't need orings)
3- I forgot .. i will post when I remember

 

[Bishopheals]

Imeos oring guide

UFS

9x1,5 (2) connector
15x1,5 (2) connector, lower sleeve
2x1 (2) inside connector
21x1,5 CR
16x1,5 upper sleeve
5x1,5 extension 510
9x2 under mouthpiece
14x1,5 base of UFS
4x1,5 under the pin

 

[imeothanasis]

aal, you can put 2 same o-rings around the metal window, no problem. I just put different o-rings to the metal window because I wanted you to open the window from the right place. I mean that when you unscrew window you have to unscrew the lower part of it because that way you can install atomizer easier. So if you want to install your atomizer easier, you put a smaller o-ring to the bottom threads of the metal window and a bigger one to the upper threads of the metal window

 

[Aal_]

aal, you can put 2 same o-rings around the metal window, no problem. I just put different o-rings to the metal window because I wanted you to open the window from the right place. I mean that when you unscrew window you have to unscrew the lower part of it because that way you can install atomizer easier. So if you want to install your atomizer easier, you put a smaller o-ring to the bottom threads of the metal window and a bigger one to the upper threads of the metal window

Thanks Imeo, what about the upper metal body why there is no oring there?

 

[imeothanasis]

We dont need it aal. UFS, Ody and mouthpiece have the same principal. We dont try to seal the cap and the upper body with an o-ring because when we will try to unscrew the cap then the liquid between threads and o-ring will come to our hands. The principal is that body's threads stops inside the bottom of the cap before cap reach the body. Thats why we have a very tiny gap between body and cap, that is 0,2mm

 

[Aal_]

We dont need it aal. UFS, Ody and mouthpiece have the same principal. We dont try to seal the cap and the upper body with an o-ring because when we will try to unscrew the cap then the liquid between threads and o-ring will come to our hands. The principal is that body's threads stops inside the bottom of the cap before cap reach the body. Thats why we have a very tiny gap between body and cap, that is 0,2mm

I never noticed this 0.2 mm I just saw it now. You really think to the smallest detail .

 

[imeothanasis]

sure aal. The detail makes the difference as you know

Noone sees this gap but its the best way to avoid liquid to our hands. Thats something that China didnt notice when they made the Ody clone even if they had it to their hands