Hi all, I just got a ufs v2 from the classifieds. Set it up and it's working well! One thing that is puzzling me. Whenever I try to unscrew the cap to refill, the atomizer ends up unscrewing from the base, and juice will leak into the collection tank. Is there a way to refill the atty without this happening?
Ufs v2 question
- Thread starter Mr e
- Start date
- th_trl_thread_readers 0
- Status
3 things
Make sure when you install atomizer liquid control is completely open to have the tightest fit.
Lube the o ring under the small cap (or ufs mouthpiece) very well it should turn freely around atomizer body.
Don't tighten the small cap or mouthpiece too much. Once you feel resistance stop.
Make sure when you install atomizer liquid control is completely open to have the tightest fit.
Lube the o ring under the small cap (or ufs mouthpiece) very well it should turn freely around atomizer body.
Don't tighten the small cap or mouthpiece too much. Once you feel resistance stop.
And the most important Mr. Keep the liquid control tight closed before refilling. That way your atomizer is secured so it will not turn
I did it lots of times, I don't remember if i had to fiddle with anything but i don't think so.
Hi Mr E.You can buy a 306 to 510 adapter from Avid Vaper.It's just a plastic piece that slides over the 306 and extends the top with a hole made for the 510 extender.There's a video by Geek Girl on you tube.good luck!
In about a month...subscribe to http://www.e-cigarette-forum.com/forum/gg/352148-gg-official-announcments.html to be notified
- Status
