ULRA - UltraLowResistanceAtomizer - Final proto vidéo - 1,5ml/7min

[peaceoffcake]

Hello,

I finished my card should cost $ 10 with the components and the PCB.
This card is to reduce the cost with no longer the pressure sensor and current sensor.
It controls the heater with the battery voltage. it can work with one or two NiMH batteries.
Tomorrow I will start making 50 boards and a mechanical prototype machining.

I can't wait to see this mod. It must be fantastic. Bravo pailpoe

 

[pailpoe]

Thank you.
I made this card for as many people as possible back into the project. I keep the other card in parallel to this one.

 

[doots]

Hello,

I finished my card should cost $ 10 with the components and the PCB.
This card is to reduce the cost with no longer the pressure sensor and current sensor.
It controls the heater with the battery voltage. it can work with one or two NiMH batteries.
Tomorrow I will start making 50 boards and a mechanical prototype machining.

This is really nice Pailpoe. Cant wait to see it for real.. Good work..

 

[pailpoe]

I am touched that you like it

 

[saulgoode]

Wow, très gentil. Please let us know if and when you make the Modulra-Mini available.

 

[pailpoe]

I just ordered 50 kits PCBs. I will receive them in early January.

I may be a mechanical prototype this week.
I also received today the pressure sensors.

 

[jlodvo]

nice work pailpoe, love your work.....

 

[pailpoe]

Thanks you.
It's my baby .

 

[breaktru]

That is a nice new twist on PV's. I'm willing to beta test it for you Pailpoe.

 

[pailpoe]

I already have a lot of people interested in being a beta tester .
The power of this mod can be adjust between 5w to 20-25w. For me, beyond 15w is too.
The system has a menu setting to adjust the power.

 

[5cardstud]

pailpoe that is a fine piece of work and I for one want one when they are available. I really like the whole idea.

 

[pailpoe]

I am not a seller. Just an amateur enthusiast.
By cons, it will be possible to buy the parts separately to assemble your product.
A system of bulk purchase will be established on the French forum.
I hope to release a complete product for less than 100 €
I hope to show a product in late January.
I work in parallel on a more advanced board (current sensor, lcd screen, tact switch,...).

 

[yoyoma_mda]

Great work Pailpoe! But PLEASE be careful, your ideas may get swiped and mass produced by la chinois! I look forward to seeing your ideas come to fruition!

 

[pailpoe]

Yes certainly.

 

[achu]

THIS IS BRILLIANT. I'm in for pre-order or order as soon as you're willing to start selling!

 

[pailpoe]

This mod will not be sold fully assembled. It will be sold in pieces:
- Electronic parts (PCB and components)
- Mechanical part
The user must make the final assembly.

I get the cards in mid-January and the mechanical prototype in January. Following a test phase of several weeks. The price will depend on the number of people interested (hopefully less than 100 € for the full mod).
The electronics and atomizer are defined strictly in my head. I still have questions on the subject of the mod (aluminum or stainless,...)

See this thread on the french forum for more informations : Cigarette Electronique • Mod 100% perso : A suivre... : E-Bricolage et Prototypes • FORUM-ECIGARETTE

We'll do it in 2 phases normally. A phase with a few people to test and after a mini production.

You will be notified HERE.

 

[cracker75]

As a noob who is just learning how all this stuff works....What are the benefits of ultra-low-R/H.V. ?

 

[pailpoe]

I don' t know. My atomizer works between 1,4v and 2,5v ( for High power).

 

[achu]

As a noob who is just learning how all this stuff works....What are the benefits of ultra-low-R/H.V. ?

Low resistance is used best with 3.7v to more efficiently turn your "juice" into vapors. This way you get more vapor and in most instances will have a more satisfying vape to put things simply. I personally use 1.5ohm cisco atomizers with my wetbox which houses one high drain 14500 battery ( this is a 3.7v battery ). High drain batteries put out a more consistent voltage and have less drop than regular batteries which loads are inconsistent. You want a more consistent output to keep the current stable to the atomizer. Simply put.. the lower the resistance the more awesome the vape with a 3.7v application. 5v+ is a completely different story.

 

[cracker75]

Thanks guys.