If you were going to build the ultimate clouding rig what would you use. I'm thinking of setting up a guilty pleasure day off set-up and thought this would be fun.
Ultimate clouding rig
- Thread starter soysos
- Start date
- th_trl_thread_readers 0
- Status
Triple twisted 28g wrapped around 2mm jig 5 wraps not touching, .4 ohm. Sony vtc4, cotton wick in a igo l. Single 1/8" air hole. Big bore drip tip with 100% vg with your flavoring of choice. Happy vaping
Dual 24g contact coils around a 3/32 drill bit. 5/6 wrap with 1/8" air holes. Nemesis clone with silver contacts. 30 amp battery.
Twisted 24 awg, 4 wraps 5/64 0.23 ohms single coil 30a sony vtc4. That's my setup atm, the risk is yours, don't blame my if the battery vents or
goes boom.
goes boom.
Ditto except dual 24 Ga around an 1/8" bit with 5/4 and XC-116 twisted into it. Sony VTC4 for the battery. Keep coils parallel to an 1/8" hole. Im itching to try 22 Ga though.
I think if I'm going to do this I should invest in some 6mg juice as my current .5 ohm rig is getting to me with 12.
Sent from my HTCONE using Tapatalk
Sent from my HTCONE using Tapatalk
I meant to quote crazy arms. I can fit 1/8" in my IGO-W, no clue if twisted would fit. I prefer going one size up over twisting or dual coils but I've never tried 22 Ga kanthal so I can't recommend it.
I have successfully fit twisted 24G wrapped on a screw(around 1/8) in my Mini Octopus along with the same setup in the full size Octopus. I am also running dual coil twisted 24G in my AGA-T2. I am running the 30A Efests on all of them. The Mini is sitting at .4 the Octo is sitting at .4 and the AGA is sitting at .3 due to a few extra wraps on the AGA coil.
- Status
Similar threads
