Unregulated Dual 18650, MOSFET, Continuous Fire Issue

[JLIT]

Just made an unregulated dual 18650 box mod with an International Rectifier 3034 -N- channel mosfet. I soldered a 15Kohm resistor across the Gate and Source pins on the MOSFET as instructed and did all wiring EXACTLY as the diagram I found to work for others. Placed one battery into the sled and it began to continuously fire without even having pressed my momentary button. I was sure to confirm that it wasn't the button by testing some other tact buttons I had used before on VV's. WHY?Ideas?

I'm told I need a master switch so my question is will that switch turned off allow it to be temporarily turned on with the fire button?

 

[jblack741]

switch should be momentary Normally off (on)

 

[JLIT]

This did the trick

 

[Afanrgr]

So did you end up having to buy a compeletly diffierent switch? I'm having the same issue with continuous fireing and I have a pretty universal momentary switch

Just made an unregulated dual 18650 box mod with an International Rectifier 3034 -N- channel mosfet. I soldered a 15Kohm resistor across the Gate and Source pins on the MOSFET as instructed and did all wiring EXACTLY as the diagram I found to work for others. Placed one battery into the sled and it began to continuously fire without even having pressed my momentary button. I was sure to confirm that it wasn't the button by testing some other tact buttons I had used before on VV's. WHY?Ideas?

I'm told I need a master switch so my question is will that switch turned off allow it to be temporarily turned on with the fire button?

 

[Warpigs]

Neat, nice job. I wish I had that talent hehe.