Bought a Beast Box mechanical mod from fasttech yesterday, putted an rda on him, to see how the coils heat, it worked great, but then i putted a top cap on my rda to vape it, and it just stopped working. batteries ain't dead, but the mod doesn't work, it doesn't seems that i burned something, cuz the wires look ok and there's no burning smell. PLEASE HELP
Unregulated mechanal parallel mod not working , NEED HELP !!!
- Thread starter owned55
- Start date
- th_trl_thread_readers 0
- Status
Does it work again if you take the cap off the RDA? If so, coil might be touching cap and shorting. I'd use your ohm meter to check power from the mod to make sure it's working right and check the atomizer for shorts.
How many volts does the meter show on the mods 510 connection with the button pressed?
What ohms resistance does the meter show for the atomizer?
What ohms resistance does the meter show for the atomizer?
Without a multimeter to read the volts coming from the 510 connection on your box, it'll be hard to know whether the issue is your mod or your atty. I'd recommending trying them each with different equipment if you don't have a meter, but you should buy one, especially if you're using box mods, it's a necessary safety piece, but beyond that, it's how you make sure your stuff is working properly.
Check your 510 terminal connection as well. I've noticed some RDAs like to move around in the spacers and threads sometimes, so you'll push a cap down and it jars something and you lose solid connection with the pin on your mod. That's almost always my culprit anyhow.
Check your 510 terminal connection as well. I've noticed some RDAs like to move around in the spacers and threads sometimes, so you'll push a cap down and it jars something and you lose solid connection with the pin on your mod. That's almost always my culprit anyhow.
You should really have a digital multi meter if you're rebuilding and have a mech mod. But if you have an ohm meter and it says it's 0.2 ohms, then that's probably alright on a dual parallel 18650 mod assuming you have good high drain safe chemistry batteries.
If it won't work with any atomizer then it's probably the mod, hard to trouble shoot without a meter.
If it won't work with any atomizer then it's probably the mod, hard to trouble shoot without a meter.
Last edited:
- Status
Similar threads
- Locked
