Upgrade suggestions

[Jscheiben]

Ok I've been vaping for 2 weeks here and am starting to look at upgrades to what I currently have. Right now I'm using an ego starter kit and am happy with it thus far but want to try other options. I've done some research on rebuildables and although it looks fairly simple I'm not quite ready to take on the endeavor. Just looking at possibly a better tank(using aspire bdc and ce4 disposable) initially then other pieces. Thanks for all the info on the site which has led to not remembering stuff like wife's bday

 

[Aawa]

If you want to upgrade from where you are at, but not ready for rebuildables the Aspire Nautilus tank is considered the tops in turnkey clearomizers. Mod wise, you will want a variable voltage/variable wattage device. Depending on your budget you can find something for as little at $50 for the mod or as high as $300 for a mod.

For $50-$75 vv/vw mods I would suggest something that goes up to 15 watts. Mods like the Vamo v5 and Vmax
For $75-$100 I would suggest mods like the e-vic and the itaste vtr
For $100-$125 I would suggest mods that goes up to 20 watts. Something like the Seigeli 20W or the Pioneer for you 722
For anything over $125 I would look at mods that run the DNA30 chip so that you can go up to 30watts of vaping. Mods like the Vaporshark DNA30, Da Mini v2, Hana Mod v3.

 

[Jim32244]

There are two routes to go mechanical mods or varibale voltage/varible wattage mods. I like VV/VW mods my self, example would be Itatse MVP.

For the tank, if you aren't read for rebuildables then I would go with an Aspire Nautilus (glass tank, replaceable coils, airflow adjust)

 

[GPC2012]

Ok I've been vaping for 2 weeks here and am starting to look at upgrades to what I currently have. Right now I'm using an ego starter kit and am happy with it thus far but want to try other options. I've done some research on rebuildables and although it looks fairly simple I'm not quite ready to take on the endeavor. Just looking at possibly a better tank(using aspire bdc and ce4 disposable) initially then other pieces. Thanks for all the info on the site which has led to not remembering stuff like wife's bday

Here is a site that has good prices and a fairly good selection of hardware.

DesertVapes Electronic Cigarettes and Supply

 

[sam_d1990]

i was in the same boat as you not to long ago mate. I was spending hrs on the net looking for different batteries ect, and i came across the Itaste VV V3. Then i spent hrs looking at all the different revues about it and i was sold. It is an amazing battery for the size on volts 3.3 up to 4 and on watts 6 up to 11. It has a built in ohms checker, puff counter also telly you how much power is left in the battery and it has a pass-through so you can vape and charge at the same time. unfortunately it does not fire sub ohm coils but not that big a deal. i run this with mainly an iclear 30B and it is a pretty damn awesome set up.

shop around as i got my Itaste VV V3 almost half price at £25 the good thing about all innokin products they have a security code you type in to there own website and it lets you know if it real or fake

i hope this helps a bit dude.

happy vaping

 

[Cool-breeze]

For a battery I suggest the MVP also. It has ego/510 threading, you could use it to help if you decide to rebuild, the battery life is fantastic compared to the ego style. For tanks I only use t3s currently. I've tried some others and had various issues. I will say the nautilus is one I've read many good things about.

 

[Klutz]

I invested into mechanical mods. Couldn't be happier, apart from having a better mechanical.

I like the 18350 tube mods. Small, weighty, built like a brick, look awesome, not expensive for cheap clones, etc. 900mah 18350 batteries can last me a whole day before I notice a real dip in performance (ymmv). Buy three/four batteries and a charger. You can keep a sweet rotation.

I coupled that with an RDA and haven't looked back. Just a trident v2 clone for £15. The whole setup cost about £80 for mod, charger, batteries, RDA, wire, cotton and a decent ohm meter. I plan on trying a genesis style and kayfun style clone too as i decide what route I really like.

I really enjoyed the Kanger TS3 clearomizer with my old ego, if you want to keep it simple. I'd personally avoid the pro-tanks as they are temperamental for such a 'turn-key' concept.

 

[Baditude]

Battery Devices:

Innokin iTaste VV3 - compact form factor like your current eGo battery, but with additional options like variable voltage/wattage, LED digital display, built-in ohm reader, battery voltage indicator, protection circuitry, and usb charger which you can use while its charging. Only 800mAh battery capacity, so if you aren't around a USB power source you'll likely need two to last all day. Larger tanks may look awkward on the slim battery.


______________

Innokin iTaste MVP2 - a box mod format which is still pocket-friendly and lightweight. Huge battery capacity (2600mAh) which should last 2 - 3 days on a charge, can also be used while it is charging on the USB charger. Variable voltage/wattage, built-in ohm reader and battery voltage indicator, protection circuitry. Can be used to charge your cell phone or I-Pod in a pinch.


_____________________

Segelei ZMax - Tube-style variable voltage/wattage mod which uses replaceable rechargeable batteries; you need to buy IMR rechargeable batteries and a box charger in addition to the mod. Built-in voltage and ohm meter. Protection circuitry. Available in a 18350 battery Mini, 18650 battery full size, and a telescopic version which can accept 3 sizes of replaceable batteries.



Advancing Up the Vaping Ladder to Mods

 

[Baditude]

Juice Attachments (Tanks):

Proper Terminology: Is it a carto, a tank, or what? A Guide to Juice Attachments

 

[madbricky-Craig]

Thanks, one of the most useful posts I have read! Direct to the point and great buyng guide.

Battery Devices:

Innokin iTaste VV3 - compact form factor like your current eGo battery, but with additional options like variable voltage/wattage, LED digital display, built-in ohm reader, battery voltage indicator, protection circuitry, and usb charger which you can use while its charging. Only 800mAh battery capacity, so if you aren't around a USB power source you'll likely need two to last all day. Larger tanks may look awkward on the slim battery.

View attachment 329130
______________

Innokin iTaste MVP2 - a box mod format which is still pocket-friendly and lightweight. Huge battery capacity (2600mAh) which should last 2 - 3 days on a charge, can also be used while it is charging on the USB charger. Variable voltage/wattage, built-in ohm reader and battery voltage indicator, protection circuitry. Can be used to charge your cell phone or I-Pod in a pinch.

View attachment 329131
_____________________

Segelei ZMax - Tube-style variable voltage/wattage mod which uses replaceable rechargeable batteries; you need to buy IMR rechargeable batteries and a box charger in addition to the mod. Built-in voltage and ohm meter. Protection circuitry. Available in a 18350 battery Mini, 18650 battery full size, and a telescopic version which can accept 3 sizes of replaceable batteries.

Advancing Up the Vaping Ladder to

 

[v1k1ng1001]

I would say unless you really like the smaller form factor of the vv3, get an mvp 2.0. It's a super versatile device that is easy to use, performs well and has amazing battery life. Also, the MVP is about the best travelling companion money can buy.

Battery Devices:

Innokin iTaste VV3 - compact form factor like your current eGo battery, but with additional options like variable voltage/wattage, LED digital display, built-in ohm reader, battery voltage indicator, protection circuitry, and usb charger which you can use while its charging. Only 800mAh battery capacity, so if you aren't around a USB power source you'll likely need two to last all day. Larger tanks may look awkward on the slim battery.

View attachment 329130
______________

Innokin iTaste MVP2 - a box mod format which is still pocket-friendly and lightweight. Huge battery capacity (2600mAh) which should last 2 - 3 days on a charge, can also be used while it is charging on the USB charger. Variable voltage/wattage, built-in ohm reader and battery voltage indicator, protection circuitry. Can be used to charge your cell phone or I-Pod in a pinch.

View attachment 329131
_____________________

Segelei ZMax - Tube-style variable voltage/wattage mod which uses replaceable rechargeable batteries; you need to buy IMR rechargeable batteries and a box charger in addition to the mod. Built-in voltage and ohm meter. Protection circuitry. Available in a 18350 battery Mini, 18650 battery full size, and a telescopic version which can accept 3 sizes of replaceable batteries.

View attachment 329132

Advancing Up the Vaping Ladder to Mods

 

[Jscheiben]

Thanks for all the directions from everyone. Prob gonna go with the nautilus for now(wife is glaring at me).

 

[JiNXeD]

I agree as well with the recommendations on the Nautilus and MVP 2.0.

I've tried multiple tank systems and find the nautilus to not only be the most satisfying for me, but worth the extra cost. You can find great deals on it too if you watch for sales.

I also love the MVP. It's affordable and very convenient and and easy to use. It's a great stepping-up device.

 

[Jscheiben]

I'm picking up an MVP 2 tomorrow, now how do I figure out what voltage/wattage I should have it set to or is it more tail an error as in adjust til you get too high and it tastes burnt and back it off a bit or is there a general guideline?

 

[Baditude]

I'm picking up an MVP 2 tomorrow, now how do I figure out what voltage/wattage I should have it set to or is it more tail an error as in adjust til you get too high and it tastes burnt and back it off a bit or is there a general guideline?

General guideline is to take the ohm of the coil and add the number "2" to find a ballpark figure. For example, 2 ohms + 2 = 4 volts. Adjust from there to your personal taste.

You will be either in voltage (U) or wattage (P) mode. Either one or the other. Whichever you last set, you will be in that mode until you make further adjustments.

 

[kiwivap]

I'm picking up an MVP 2 tomorrow, now how do I figure out what voltage/wattage I should have it set to or is it more tail an error as in adjust til you get too high and it tastes burnt and back it off a bit or is there a general guideline?

Start low then work up. Many people use the wattage option because you just set the watts and don't calculate anything. So start low - around 6 watts, and click to where you like it. In watts (P) the MVP2 will read the ohms of your attachment and calculate the volts for you. You can change attachments and stay at the same watts, or just click up or down in power if you want to adjust. This is why variable wattage was added to devices - nice and easy.

 

[dice57]

Get a good solid regulated that will put out 15 watts, that will let you dial in your atty's plus have sufficient power for an rba if/when you are ready. Nautilus is a decent choice if not ready for rba's yet. Quality gear is always the best value.

 

[Jscheiben]

Can't wait to get the upgraded gear, am interested in seeing the difference in vapor and taste. On a side not how does the MVP play with aspire bdc I anyone knows?

 

[Jscheiben]

Thanks for all the tips. Just got my MVP and LOVE it. Still figuring out all the settings but prefer the wattage setting. Right now I'm vaping at 9.5w and the taste and th is just amazing compared to the old unit I was using. One thing I'm confused on is that it should show me power level but when I press u+p I get my resistance setting R2.1, next shows U4.1, but when I hold down voltage button it shows 5.0. Any tips?

 

[30+Years]

Power level?

U 4.1 = the charge of the battery. 4.2 is fully charged.

FYI. If you hit the U (volt) button last it will be set to volts not watts.