Hi everyone,
This week we release upgraded ProTank III heads, as you will see below there some differences with the wick, but outside of this they are compatible with all versions that accept ProTank III heads.
Just to confuse things further, our EVOD 2 clearomizers (these accept ProTank III heads) can be purchased in the original form (while stocks last) or in the new upgraded form we have labelled V2 in this case.
Also of note this week is the restocking of iClear 2.0ohm heads - now back in stock after a short absence.
We are also releasing some very advanced atomizers, please note these are ONLY for experienced users who know how to build and maintain such devices and assemblies safely.
Archive of previous weekly newsletters - Click here
Cheers and vape on!
ProTank III - Replacement Dual Coil Heads - 5 Pack
by KangerTech
Released 17-6-14 by Naked Vapour - Upgraded wick design (- same head, improved wick design - no external wick).
BCDC - Bottom Changeable Dual Coil
Suitable for use in
NEW - Upgraded wick deisgn
5 Pack
AeroTank compatible!
When to replace?
This often comes down to personal choice, rather than being forced too because of a sudden failure.
When e-liquid is vapourized, what isn't vapourized is left behind, and that is left behind on the coil, also on and within the wick.
This will at some point start interfering with the quality, volume and overall taste of the vapour produced.
So based on that, treat yourself to a fresh head when the vapour and flavour production fall to unsatisfactory levels and or with each flavour change in ideal circumstances.
You might be surprised at just how much they can change with use.
iClear 16 - Dual Coil Head - 5 PACK
5 Pack
Replacement Heads
Storage Options
These 4ml glass bottles are ideal for longer term storage of e-Liquids and concentrates.
Ideally,store with the lid on vs using the rubber dropper - some flavour concentrates may soften the rubber.
Concentrate flavours that would be best stored in glass:
4ml Glass Bottle with Lid and Dropper
NEW - Glass storage option
More storage options - click on the image to find out more
Advanced Users Only - Rebuildable Atomizers
EHPRO - Nimbus V3 Clone - Rebuildable Dripping Atomizer
Released by Naked Vapour 18-6-14
The Nimbus is an advanced atomizer for advanced users only - this product requires the user to build and replace their own coils as needed.
The Nimbus is supplied with a pair of coils fitted and is ready to use, wet the wicks with e-Liquid first and keep wet to ensure you do not dry burn - this is a dripping atomizer that requires the user to add e-Liquid as and when required - more like a "roll your own" style of vaping.
Single or Dual Coils
The Nimbus V3 Clone is the first (along with the more advanced EHPRO Atomic) we have released that has 3 coil binding posts - 2 being ground and the centre being positive.
This arrangement allows the user to run a single coil or dual coils - ensure you measure your coils resistance before use. A small screwdriver is supplied with the Nimbus V3.
Please check your circuits before use - dead shorts may kill or damage some power sources. Advanced User discretion advised.[/b]
ADVANCED USERS ONLY - those looking to purchase this type of device may already know more than we do, we offer no user support. There are no manufacturer supplied manuals or guides of any sort.
EHPRO - Nimbus V3 Clone
Rebuildable Dripping Atomizer
Single or Dual Coil!
ADVANCED USERS ONLY
EHPRO - Atomic Clone - Rebuildable Dripping Atomizer with adjustable airflow
Released by Naked Vapour 18-6-14
The Atomic Clone is an advanced atomizer for advanced users only - this product requires the user to build and replace their own coils as needed and is required before first use.
The Atomic Clone is supplied with wick and wire for the end user to begin from scratch - you must build your own coils and install before first use - once done, wet the wicks with e-Liquid and keep wet to ensure you do not dry burn - this is a dripping atomizer that requires the user to add e-Liquid as and when required - more like a "roll your own" style of vaping.
Adjusting Airflow
The middle ring of the atomizer has 3 holes that will align in differing configurations with 6 inner holes, allowing a wide range of airflow options - adjust the ring by unscrewing the top cap slighlty - adjust and retighten the top cap to lock in place.
Please check your circuits before use - dead shorts may kill or damage some power sources. Advanced User discretion advised.
ADVANCED USERS ONLY - those looking to purchase this type of device may already know more than we do, we offer no user support. There are no manufacturer supplied manuals or guides of any sort.
EHPRO - Atomic Clone
Adjustable Airflow
Rebuildable Dripping Atomizer
Single or Dual Coil!
ADVANCED USERS ONLY
Batteries for those less advanced, but wanting to explore a little
eGo-C Twist - 400mAh Battery
Produced by a leading e-Cigarette manufacturer these eGo styled variable voltage batteries are very similar to our Vision Spinner batteries, but at a lower price point.
The eGo-C Twist 400mAh is slightly longer at 78mm than regular 60mm eGo-C Mini 400mAh batteries, but still shorter than a standard 900mAh.
eGo-C Twist - 400mAh
NEW 400mAh size!
Spinner/Twist style Variable Voltage
eGo-C 1300mAh Passthrough Battery
This eGo-C Passthrough battery works just like any other regular eGo styled battery with a couple of differences.
Firstly, it is a standard unregulated 3.3 ~ 4.2 volt battery, allowing you to vape like standard eGo syled batteries. 4.2volt output with a full charge and cuts off at around 3.3volt output.
It is also a USB passthrough battery at 4.2volt, which allows the user to vape and charge at the same time when the supplied USB cable is also connected to a suitably powered USB source.
eGo-C 1300mAh Passthrough
NEW - 1300mAh!
Includes USB cable
Vape and charge!
510-eGo Connection
Archive of previous weekly newsletters - Click here
Until next week, cheers from Rob, Lia and team at Naked Vapour.
Naked Vapour is New Zealand's e-Cigarette specialist.
www.nakedvapour.co.nz
For more help, support, news, reviews and opinions, please visit and register for FREE with our forum at www.kiwivapers.com
Copyright © 2014, Naked Vapour Ltd, All rights reserved.
This week we release upgraded ProTank III heads, as you will see below there some differences with the wick, but outside of this they are compatible with all versions that accept ProTank III heads.
Just to confuse things further, our EVOD 2 clearomizers (these accept ProTank III heads) can be purchased in the original form (while stocks last) or in the new upgraded form we have labelled V2 in this case.
Also of note this week is the restocking of iClear 2.0ohm heads - now back in stock after a short absence.
We are also releasing some very advanced atomizers, please note these are ONLY for experienced users who know how to build and maintain such devices and assemblies safely.
Archive of previous weekly newsletters - Click here
Cheers and vape on!
ProTank III - Replacement Dual Coil Heads - 5 Pack
by KangerTech
Released 17-6-14 by Naked Vapour - Upgraded wick design (- same head, improved wick design - no external wick).
BCDC - Bottom Changeable Dual Coil
Suitable for use in
- ProTank III
- ProTank III Mini
- T3D
- AeroTank & AeroTank Mini
- EVOD Glass and EVOD 2
NEW - Upgraded wick deisgn
5 Pack
AeroTank compatible!
When to replace?
This often comes down to personal choice, rather than being forced too because of a sudden failure.
When e-liquid is vapourized, what isn't vapourized is left behind, and that is left behind on the coil, also on and within the wick.
This will at some point start interfering with the quality, volume and overall taste of the vapour produced.
So based on that, treat yourself to a fresh head when the vapour and flavour production fall to unsatisfactory levels and or with each flavour change in ideal circumstances.
You might be surprised at just how much they can change with use.
iClear 16 - Dual Coil Head - 5 PACK
5 Pack
Replacement Heads
Storage Options
These 4ml glass bottles are ideal for longer term storage of e-Liquids and concentrates.
Ideally,store with the lid on vs using the rubber dropper - some flavour concentrates may soften the rubber.
Concentrate flavours that would be best stored in glass:
- Wintergreen
- Absinthe
- Ripe Banana
- Sour flavors
- Malic acid
- Citrus acid
- Cinnamon like "atomic cinnamon" types
- Cinnamon Red Hots
- Clove
- Orange (Sweet) Essential Oil
4ml Glass Bottle with Lid and Dropper
NEW - Glass storage option
More storage options - click on the image to find out more
Advanced Users Only - Rebuildable Atomizers
EHPRO - Nimbus V3 Clone - Rebuildable Dripping Atomizer
Released by Naked Vapour 18-6-14
The Nimbus is an advanced atomizer for advanced users only - this product requires the user to build and replace their own coils as needed.
The Nimbus is supplied with a pair of coils fitted and is ready to use, wet the wicks with e-Liquid first and keep wet to ensure you do not dry burn - this is a dripping atomizer that requires the user to add e-Liquid as and when required - more like a "roll your own" style of vaping.
Single or Dual Coils
The Nimbus V3 Clone is the first (along with the more advanced EHPRO Atomic) we have released that has 3 coil binding posts - 2 being ground and the centre being positive.
This arrangement allows the user to run a single coil or dual coils - ensure you measure your coils resistance before use. A small screwdriver is supplied with the Nimbus V3.
- 510 connection type
Please check your circuits before use - dead shorts may kill or damage some power sources. Advanced User discretion advised.[/b]
ADVANCED USERS ONLY - those looking to purchase this type of device may already know more than we do, we offer no user support. There are no manufacturer supplied manuals or guides of any sort.
- Please research well before purchase.
- For peer to peer support - www.kiwivapers.com
EHPRO - Nimbus V3 Clone
Rebuildable Dripping Atomizer
Single or Dual Coil!
ADVANCED USERS ONLY
EHPRO - Atomic Clone - Rebuildable Dripping Atomizer with adjustable airflow
Released by Naked Vapour 18-6-14
The Atomic Clone is an advanced atomizer for advanced users only - this product requires the user to build and replace their own coils as needed and is required before first use.
The Atomic Clone is supplied with wick and wire for the end user to begin from scratch - you must build your own coils and install before first use - once done, wet the wicks with e-Liquid and keep wet to ensure you do not dry burn - this is a dripping atomizer that requires the user to add e-Liquid as and when required - more like a "roll your own" style of vaping.
Adjusting Airflow
The middle ring of the atomizer has 3 holes that will align in differing configurations with 6 inner holes, allowing a wide range of airflow options - adjust the ring by unscrewing the top cap slighlty - adjust and retighten the top cap to lock in place.
Please check your circuits before use - dead shorts may kill or damage some power sources. Advanced User discretion advised.
ADVANCED USERS ONLY - those looking to purchase this type of device may already know more than we do, we offer no user support. There are no manufacturer supplied manuals or guides of any sort.
- Please research well before purchase.
- For peer to peer support - www.kiwivapers.com
EHPRO - Atomic Clone
Adjustable Airflow
Rebuildable Dripping Atomizer
Single or Dual Coil!
ADVANCED USERS ONLY
Batteries for those less advanced, but wanting to explore a little
eGo-C Twist - 400mAh Battery
Produced by a leading e-Cigarette manufacturer these eGo styled variable voltage batteries are very similar to our Vision Spinner batteries, but at a lower price point.
The eGo-C Twist 400mAh is slightly longer at 78mm than regular 60mm eGo-C Mini 400mAh batteries, but still shorter than a standard 900mAh.
- One of the smallest variable voltage devices to date
Setting your output voltage is easy, simply turn the knurled dial on the bottom to the voltage you would like.
Voltage output is stepped at 0.5v increments.- 3.3v -suitable for devices in the 1.5 ~ 2.4ohm range
- 3.8v - suitable for 1.8ohm ~ 2.8ohm
- 4.3v - suitable for 2.4 ~ upwards
- 4.8v - suitable for 2.8ohm and upwards
eGo-C Twist - 400mAh
NEW 400mAh size!
Spinner/Twist style Variable Voltage
eGo-C 1300mAh Passthrough Battery
This eGo-C Passthrough battery works just like any other regular eGo styled battery with a couple of differences.
Firstly, it is a standard unregulated 3.3 ~ 4.2 volt battery, allowing you to vape like standard eGo syled batteries. 4.2volt output with a full charge and cuts off at around 3.3volt output.
It is also a USB passthrough battery at 4.2volt, which allows the user to vape and charge at the same time when the supplied USB cable is also connected to a suitably powered USB source.
- NB: Standard USB wall adapters as in our kits are not suitable for this, dedicated powered USB ports only, most computers usually have at least one.
eGo-C 1300mAh Passthrough
NEW - 1300mAh!
Includes USB cable
Vape and charge!
510-eGo Connection
Archive of previous weekly newsletters - Click here
Until next week, cheers from Rob, Lia and team at Naked Vapour.
Naked Vapour is New Zealand's e-Cigarette specialist.
www.nakedvapour.co.nz
For more help, support, news, reviews and opinions, please visit and register for FREE with our forum at www.kiwivapers.com
Copyright © 2014, Naked Vapour Ltd, All rights reserved.
