Uwell crown

[martin griffin]

My new tank leaks through the air holes and when you try to vape you get juice. This is the first tank full.

 

[classwife]

Moved you to Clearomizers from Ask The Veterans so you get help now instead of in a few days

 

[Hyperspace]

My new tank leaks through the air holes and when you try to vape you get juice. This is the first tank full.

Sounds like the tank is over full. Pour a little juice out and see how it goes.

 

[titanle]

i had that problem from time to time and i found that it usually happened if i left the top off too long while refilling. Try bottom filling and see if you still get a leak.

 

[Samwise Gamgee]

Hi, does anyone know how I would go about using this tank on the Kanger Kbox 160w? What setting would the mod need to be on?

 

[Mowgli]

Hi, does anyone know how I would go about using this tank on the Kanger Kbox 160w? What setting would the mod need to be on?

I use mine with .25Ω coils at 72W
I have no interest in TC.
I don't know about .5Ω either. I like the .25, the others not so much.

 

[Samwise Gamgee]

I use mine with .25Ω coils at 72W
I have no interest in TC.
I don't know about .5Ω either. I like the .25, the others not so much.

Is it just a case of taking off the Nautilus Aspire and putting the Crown on without having to fiddle with what setting the mod fires in then? There are four modes with TC:

Ni: Pure Nickel
Ti: Titanium
NiCr: Nichrome
SUS: Stainless Steel

And the one other is with TC off. So if I use the Uwell Crown on this I'm guessing it will be fine? The coils are 0.5 by the way.

 

[T0mmy1977]

Use the .5 coils with TC off (Wattage/Power Mode). Those coils are rated 30-80 watts, so start at 30 watts after letting your new coils fully saturate with e-liquid. Bump up the watts as needed.

 

[disley]

My crown leaks if I top fill it.
No leaks if I bottom fill it.

 

[Mowgli]

My crown leaks if I top fill it.
No leaks if I bottom fill it.

What %VG? I use high VG juice and always top fill with 0 leaking.