VAMO V7 Centre-Pin

[ih8analogs]

Hey guys, just looking for a bit of help with my brand new, just out of the box Vamo V7. Any input would be appreciated.

The adjustable centre pin on this appears to be a bit loose and whenever I try and attach my Vivi Nova 3.5ml tank it seems to twist the pole back down with it and thus not making connection.
Could this be because there is very little space separating the bottom of the coil head from the shell of the tank itself? Or is this something I need to fix within the Vamo

Any help would be much appreciated please and thank you!

(Btw kangertech Emow tank works like charm)

 

[doofy666]

What I did was make spacers for the vamo 510 screw. Drill a 3 mm hole in some .009 inch metal (a coke can would probably do) and cut round the hole as close as possible. I used 3 of these and problem solved.

This will probably make a device sit proud on the vamo, so after screwing the device on, screw the beauty ring up to the device for a firm seat.

 

[Rsunderl]

Hi crazyfingers and welcome aboard!

It could also be that you are tightening the tank down too hard when attaching it. this will push the Vamo's pin down. You only need it to be finger tight.

Oh and be carefil with all-metal spacers. If they are too wide, you take a chance that they might contact the outer, negative side of your Vamo and cause a short. On the vamo, (since it's a regulated mod) you will probably just not be able to fire your tank, but thought you should be aware.

Happy Vaping!