VaporMoon & The Saber Touch Official Thread!
- Thread starter Sir_Lawrence
- Start date
- th_trl_thread_readers 0
- Status
OK Guys... here's an update...
Spoke with the workers on site repairing the electrical stuff...
They said it was also being caused in a small relay place or something like that. I don't have a clue.
A part they need is in route from PA and power Will be back on today.
I had to pick up my son from school because they had to take his school off line to do the repairs. I don't know why but they did.
Guys, I have a company now threading lots of Saber tubes for me. And all of the Sabers ordered during the first 1 1/2 weeks are already powdered... just need the circuits inside and epoxied.
If the power does come on before morning, I will be able to start shipping orders no later than Tuesday, which means you will have your Saber orders for that first run of the month by Thursday.
I'm so tired of eating fast food and living like the Flinstones. Thank you all for this misfortune, but some things I can't control. Thank you all.
Spoke with the workers on site repairing the electrical stuff...
They said it was also being caused in a small relay place or something like that. I don't have a clue.
A part they need is in route from PA and power Will be back on today.
I had to pick up my son from school because they had to take his school off line to do the repairs. I don't know why but they did.
Guys, I have a company now threading lots of Saber tubes for me. And all of the Sabers ordered during the first 1 1/2 weeks are already powdered... just need the circuits inside and epoxied.
If the power does come on before morning, I will be able to start shipping orders no later than Tuesday, which means you will have your Saber orders for that first run of the month by Thursday.
I'm so tired of eating fast food and living like the Flinstones. Thank you all for this misfortune, but some things I can't control. Thank you all.
As I have stated in previous emails and on this thread....I want to cancel my order and would like you to issue me a refund. I believe I have been more than patient but I do not want to wait any longer. Please issue my refund in the amount of $173.95 for the two separate invoices. I also don't believe I should have been charged until the item ships but oh well. I hope the power goes back on for you. I would like to receive an email from you stating that my refund has been processed. Thank you!!!
If you have read the above posts you will see that Sir Lawrence was in the Hospital, and lost two weeks of production, and now the power outage, these things he had no control over. Is this your first PV, if so I can understand your frustration. If not Vapormoon is a reputable vendor who has the Best Warranty of any Mod. He will get your Mod out if you are patient, and want a mod that will last you forever, and hits like a freight train. He will also refund your money if your are that ANSI about it, that's how he rolls, just a super nice person in general with a heart of gold. So give it a few days if you still want a refund, he will answer you back, as you see here he is trying his best right now to get them done even without power by farming some work out, and taking care of his family during this power outage.
Smokie, I have been very patient and I understand things happen. I'm glad he is feeling better and hope his power is restored soon. But you are correct, this is my first PV and I do not wish to wait any longer. I know SirLawrence is a good guy and this is nothing against him personally. It's business and therefore as a customer I want to cancel my order, receive my refund and choose another direction. Thanks for your reply and happy vaping!!!
Sir Lawrence,
What are the order dates included in the "first run of the month"?
I am very anxious to receive my new SaberTouch and I am very patient also.
Karen from Oregon
What are the order dates included in the "first run of the month"?
I am very anxious to receive my new SaberTouch and I am very patient also.
Karen from Oregon
I am sure he will refund your money as soon as he gets power back.
Yes my mistake, Sorry with my apologizes about that post, just wanted to make sure about what all say.
Last edited:
Easy there dude....that wasn't me that posted that comment. You need to look at that a little closer. While yes, I did just order a ProVari V2 since I do want a mod and don't want to wait any longer for the Saber...You sir are incorrect with your post. I have never even used what you have indicated about. I am currently using the first thing I started with and that's a Bloog MaxxFusion. But thanks for posting that on the the thread and not getting your info straight before hand!!! I am a stand up guy and a customer and don't need to defend my purchases with anyone. I ordered a Saber, waited almost a month, don't want to wait any longer, want to cancel my order, in the meantime I ordered something else. If that is wrong...then oh well! Now you lost all credibility with me!!!!
And in case anyone wants to see what I ACTUALLY wrote on my other post....here is the thread!
http://www.e-cigarette-forum.com/forum/provari/273977-its-been-ordered.html
Last edited:
I am sure he will refund your money as soon as he gets power back.
Yes my mistake, Sorry with my apologizes about that post, just wanted to make sure about what all say.
Again my apologizes, and good luck with the Pro-Vari V-2, I do not know what type of Saber you had ordered if it was a 5 amp HP in VV, but the the V-2 still has its limitations with only pushing 3.5 amps which you still can not use a dual coil or a real low ohm carto on it, just letting you know.
Thanks for clearing that up! I am NOT a liar and don't EVER like to be accused of being one!
Yes I can understand that, it was my terrible mistake on my part, and I do admit when I have made one or I am just plain wrong. I always look out and fight for all vapers rights in our community even against vendors when they sell a faulty product or just taken advantage of vapers, and you have every right to request a refund. Like I said before, I know Sir Lawrence he will refund you without any hesitation. Peace Out, and Vape On, Smokie
Hey SL. I hope you get your power situation rectified ASAP. I just wanted to pass on that my saber is still kicking and a buddy of mine jumped the gun and ordered one. He got kinda lost in the website and forgot to order his passthrough and forgot to add HP circuitry to his order. I'm pretty sure he sent you an email, just bill him for the stuff that he forgot to add. Take your time man. Patience is important especially when dealing with handmade custom stuff. I really hope your electricians work it out for you. I love my saber, and now I share your passion in wanting your customers and friends to love theirs.
Take a few deep breaths my good man. I hope it all gets worked out for you. Have a great weekend.
Take a few deep breaths my good man. I hope it all gets worked out for you. Have a great weekend.
I'm so sorry to hear you settled with a provari instead of waiting for your saber. I wish someone could have talked you out of that.
Patience is a virtue people! Sir Lawrence could not control these conditions. He's a great vendor, though!
DUDE!!! I can't speak for everyone here, BUT I can speak for me, my wife and my brother-in-law (all who have placed orders in the last 10 days!!). TAKE YOUR TIME!!! Life happens, and we understand. You were sick and now the electricity is out...both of which were out of your control. 1st make sure you are all good, and when you are and the electricity is back on you can get back to work. *this is assuming you have taken the appropriate precautions so that you do not end up in the hospital again!!*
To everyone who is also waiting on their One Of A Kind ST...If the wait is too much for you, I understand where you are coming from, BUT it is not just an ST! This is a handmade work of art! I will sit here and wait until mine is ready for me to enjoy for a VVVEEERRRYYY looooooooooong time! So if the wait is too much just SETTLE and get a silver bullet just like your best friend, next door neighbor, etc... But if you want THE S***, understand that sometimes things happen and we might have to wait for what we want! You can't just pop it in the microwave and have it in 90seconds...THIS IS HAND MADE PPL!!! If your $ is "tied up" or whatever you shouldn't have placed your order in the first place.
Oh good Lord...I went on and on! Ok, now I'll catch my breath!
SL...take your time and make everyone as happy as I know that me, my wife and my brother-in-law will be!
p.s. I might be from Texas (and yes I do own several guns, lol) but I would never offer to shoot you!!
Well put Wolfaman,
Sir Lawrence, take your time and get well. Your health is priority 1 as it will reflect in your work if you are stressed and under undue pressure. If I wanted function at the expense of quality and artistic merit I would have ordered a Lava Tube
.
If some can't wait feel free to put me at the back of the line, I can and will.
Cheers
Sir Lawrence, take your time and get well. Your health is priority 1 as it will reflect in your work if you are stressed and under undue pressure. If I wanted function at the expense of quality and artistic merit I would have ordered a Lava Tube
.If some can't wait feel free to put me at the back of the line, I can and will.
Cheers
I'm out of the dark ages! Finally!
I have so many orders to process in my emails, and so many emails to answer. Hopefully, by tomorrow night, I will have responded to everyone.
Orders up to the 1st week on Feb will be shipped no later than Wednesday. All other order, up to today will be shipped no later than the following Thurs.
Again, this has been a horrific experience for me, as well as you all who are waiting for your orders. I couldn't get a generator big enough to run my machines and supply light as well.
Thank you all again for seeing me through this... you all don't know how much that means to me. But I want your Saber to come out perfect for each of you all!
Well tonight, I have an all night date with my equipment!
I have so many orders to process in my emails, and so many emails to answer. Hopefully, by tomorrow night, I will have responded to everyone.
Orders up to the 1st week on Feb will be shipped no later than Wednesday. All other order, up to today will be shipped no later than the following Thurs.
Again, this has been a horrific experience for me, as well as you all who are waiting for your orders. I couldn't get a generator big enough to run my machines and supply light as well.
Thank you all again for seeing me through this... you all don't know how much that means to me. But I want your Saber to come out perfect for each of you all!
Well tonight, I have an all night date with my equipment!
THAT IS SICK!!! I can't wait! I might need to make a small change to my order and my wife's order since they are coming sooner that I expected. I'll zap an e-mail to ya with the info. Just get back to me when you can...ie before you ship them out.
Glad that the lights are back on and all!!
I am a student of History and Economics.
And in reading this thread over the last few weeks I've been reminded of many books I've read, and examples used in them.
Long ago if you wanted something built/ made, most often you put in an order for someone to build/make it for you. and you bought directly from the manufacturer. (a horse buggy or wagon for instance) as is still common with Most commercial airplane manufacturers, and Saber Touches of course
This usually means better Quality/Craftsmanship/Customization, at the cost of (theoretically) more time and money.
Later, assembly line mass produced items with usually less Quality/Craftsmanship/Customization, often shipped around the country, usually to be sold by 3rd parties. Usually (theoretically) involves less time and money
Henry Ford said you can have any color you want as long as it's BLACK
There's nothing wrong with either system. it just depends on your priorities. And the beauty of our modern economy is that we now have choice to choose between the 2 based on our needs, and priorities.
People talk of the "market" or the "economy" as a thing, a cold impersonal money system or machine, but it's actually millions of people making mutually beneficial financial transactions with each other. according to their Needs/Wants/Desires, as seen in the last few pages here. it's a beautiful thing.
Now after reading this post you will probably think one of two things:
1: Wow !! I never knew Dogman was so "Deep", such a intelligent fellow, so suave and debonaire.....
2: Wow !! what a sad, pathetic, little man, he should really get out of the house more.....
This economical interlude was provided by "Evil Lab Techs Inc"
And in reading this thread over the last few weeks I've been reminded of many books I've read, and examples used in them.
Long ago if you wanted something built/ made, most often you put in an order for someone to build/make it for you. and you bought directly from the manufacturer. (a horse buggy or wagon for instance) as is still common with Most commercial airplane manufacturers, and Saber Touches of course
This usually means better Quality/Craftsmanship/Customization, at the cost of (theoretically) more time and money.
Later, assembly line mass produced items with usually less Quality/Craftsmanship/Customization, often shipped around the country, usually to be sold by 3rd parties. Usually (theoretically) involves less time and money
Henry Ford said you can have any color you want as long as it's BLACK
There's nothing wrong with either system. it just depends on your priorities. And the beauty of our modern economy is that we now have choice to choose between the 2 based on our needs, and priorities.
People talk of the "market" or the "economy" as a thing, a cold impersonal money system or machine, but it's actually millions of people making mutually beneficial financial transactions with each other. according to their Needs/Wants/Desires, as seen in the last few pages here. it's a beautiful thing.
Now after reading this post you will probably think one of two things:
1: Wow !! I never knew Dogman was so "Deep", such a intelligent fellow, so suave and debonaire.....
2: Wow !! what a sad, pathetic, little man, he should really get out of the house more.....
This economical interlude was provided by "Evil Lab Techs Inc"
Last edited:
- Status
Similar threads
- Locked
