VaporMoon & The Saber Touch Official Thread!
- Thread starter Sir_Lawrence
- Start date
- th_trl_thread_readers 0
- Status
New Color For A Saber Touch...
Blue Ice Explosion!
Save $15.00 for a Limited Time!
Click Here to Check It Out!
Also, The Under Load Meters are
Back In Stock!
Keep On Vapin'!
Blue Ice Explosion!
Save $15.00 for a Limited Time!
Click Here to Check It Out!
Also, The Under Load Meters are
Back In Stock!
Keep On Vapin'!
Awww, dang that looks sweet!
Man, come on Powerball, I want 'em all!
Sent from my iPod touch using Tapa-tapa-tapa-tapatalk
Man, come on Powerball, I want 'em all!
Sent from my iPod touch using Tapa-tapa-tapa-tapatalk
Do you all like this color?
It really looks Great in the Sunlight!
Let me know.
It really looks Great in the Sunlight!
Let me know.
Hey Guys... you all really do like this new color!
Thanks for all of the orders.
Now, I'll be putting a different color up on the Weekly Special section this week, so if you want to get the sale on this color, place your orders soon.
Thanks so much!
Thanks for all of the orders.
Now, I'll be putting a different color up on the Weekly Special section this week, so if you want to get the sale on this color, place your orders soon.
Thanks so much!
Loving my Saber VV as i bought it at a vape meet, this being my first mod ever it is great! However i am just a tad bit confused on a few matters, and i am hoping to get unconfussed (sorry i do not know much about mod's right now);
inside the battery cap it says uses 2 16340 3.7V. It came with four trust fire 3.7 Li-ion 880mah batteries, but i was thinking seeing as i have to pick up a trust fire multi-charger (which says it can charge the batteries i have) can i use the trust fire 16340 3.6v Li-ion 880mah batteries?
Checking one Canadian site and it says i need the 3.7V 16340 batteries to run dual cart's, and the beginning of the of this thread it is stated you can use 3.6V 16340's
I read a few sites that says not to charge the version i have in serial? If so;
View attachment 100248 is this what they call serial? and would be a bad idea? do i need a charger that would only do one battery at a time to charge?
Other then that, like i said i have been playing with it, and enjoying it (before the batteries die then i need to wait to get the multi charger) and i am loving it! I have had a vision extreme on it and it ran like a champ, so did my stardust's.....this is by far way better then the ego's as it does not feel like you are going to break it or that you have to wonder if you are pressing to hard on the firing button
inside the battery cap it says uses 2 16340 3.7V. It came with four trust fire 3.7 Li-ion 880mah batteries, but i was thinking seeing as i have to pick up a trust fire multi-charger (which says it can charge the batteries i have) can i use the trust fire 16340 3.6v Li-ion 880mah batteries?
Checking one Canadian site and it says i need the 3.7V 16340 batteries to run dual cart's, and the beginning of the of this thread it is stated you can use 3.6V 16340's
I read a few sites that says not to charge the version i have in serial? If so;
View attachment 100248 is this what they call serial? and would be a bad idea? do i need a charger that would only do one battery at a time to charge?
Other then that, like i said i have been playing with it, and enjoying it (before the batteries die then i need to wait to get the multi charger) and i am loving it! I have had a vision extreme on it and it ran like a champ, so did my stardust's.....this is by far way better then the ego's as it does not feel like you are going to break it or that you have to wonder if you are pressing to hard on the firing button
I would use 16340 3.7v batts simply because you have more power to work with, and they will last longer.
On that charger, you can charge up to only 2 batteries at a time... one in each slot. What they meant by charging in serial is to put more than 1 battery in each slot... a No No!
But yes, use 3.7v batteries... and if you like dual coils, use high drain batteries like AW IMR 16340 3.7v 550mAh or higher. They put out a lot more amps!
Hope this helps.
On that charger, you can charge up to only 2 batteries at a time... one in each slot. What they meant by charging in serial is to put more than 1 battery in each slot... a No No!
But yes, use 3.7v batteries... and if you like dual coils, use high drain batteries like AW IMR 16340 3.7v 550mAh or higher. They put out a lot more amps!
Hope this helps.
it sure did and thank you! i did see a site that had the AW IMR 16340 550mAh not sure if they are protected or not...so iwill hold off on getting the 3.6 for now, and use the 3.7's i have thank you again for the info, and more so thank you for making the saber line, these like i said are great, and right up my alley for a perfect mod!
thank you again for the info, and more so thank you for making the saber line, these like i said are great, and right up my alley for a perfect mod!IMR batteries use a different, much safer chemistry. They are not protected since they don't need to have that extra circuit built into them.
Get A Free Digital Multi Meter
With A Saber Touch Order!
Offer Good This Monday & Tuesday Only!
Check It Out At
VaporMoon.com
*For New Orders Only!*
No rest for the best, SL!
Sent from my iPod touch using Tapa-tapa-tapa-tapatalk
Sent from my iPod touch using Tapa-tapa-tapa-tapatalk
That's Funny!No rest for the best, SL!
Sent from my iPod touch using Tapa-tapa-tapa-tapatalk
I've got to order some Digital Multi Meters really fast! You all have taken my supply! LOL
Thanks So Much!
I asked Grimm Green to check, and test this, and the KICK works in the Saber 3.7 /6 volt Mod Only with a 18500 IMR Battery , NOT any other Saber style. Watch the Video
Thanks Smokie...
Some people have asked me to make a Saber Touch that will accept the Kick with an 18650 battery. If I have enough people that want it, I can do it.
I'm also curious to see if the Kick will work with the Saber Touch Mini, if I extend the inside of the battery compartment. I can also retro fit the Mini to accept a 16350 3.7v IMR battery.
You all let me know if this is really something that you would like.
Thanks again Smokie.
Some people have asked me to make a Saber Touch that will accept the Kick with an 18650 battery. If I have enough people that want it, I can do it.
I'm also curious to see if the Kick will work with the Saber Touch Mini, if I extend the inside of the battery compartment. I can also retro fit the Mini to accept a 16350 3.7v IMR battery.
You all let me know if this is really something that you would like.
Thanks again Smokie.
The best way for the 3.7 / 6 volt I say is to make a extension sleeve, you could have just a 2 or 3 colors to stock, and any other color would be special order. Not sure about the mini using such a small bat, may not be worth the bat life.
And now you have to buy a KICK for fitting, and testing, me too! And their all sold out, lol
There really would be no way to make an extension sleeve for the Saber... remember, the threading is on the outside, so if you put an extension onto it, you would see the original threads of the original body. Wouldn't look so good!
What I can do is to figure out a way to extend the inside of the battery compartment so that it would be no longer than the Saber VariVolt. That would take some really close fitting to be able to fit all of the circuitry inside without making it any longer. Should look really nice... just like the VV but it will take the Kick. Also, I could put an extra piece to fit inside if the user didn't want to use the Kick and just go with the 18650 by itself. So, it would be two-fold!
What I can do is to figure out a way to extend the inside of the battery compartment so that it would be no longer than the Saber VariVolt. That would take some really close fitting to be able to fit all of the circuitry inside without making it any longer. Should look really nice... just like the VV but it will take the Kick. Also, I could put an extra piece to fit inside if the user didn't want to use the Kick and just go with the 18650 by itself. So, it would be two-fold!
Just leave all alone, too much work for you to start with this, vapers will never get their sabers on time or you will put yourself in the hospital working all those hours. Just let them buy the 18500 bat for the Kick, as you seen in Grimm's video it works just fine on a 3.7 / 6 volt Saber. Be glade your Saber can except it, a lot of other Mods cannot.
Awe Smokie, thanks for your concern!
A lot of people have asked if I could do this... just trying to please the customer!
A lot of people have asked if I could do this... just trying to please the customer!
- Status
Similar threads
- Locked
