Vapresso ceramic coils

[Tarener0421]

so tonight I bought the Vapresso target tank. I was looking to get great flavor, but instead they taste like burnt rubber? Primed the coil well and have tried it numerous times since about 7 pm. I have tried a variety of wattage between 20 and 40 watts and no matter what I have done I can't taste any amazing juice flavors like I had read about just burnt rubber. I had high hopes for the flavor from this tank, so many good reviews! not sure if i am doing something wrong any suggestions would be appreciated. Starting to regret my buy? Hoping that overnight it will soak up more and be better in the morning

 

[dennism]

I've also had this problem, if you primed and let it soak, and still have bad taste, this is what worked for me. remove the coil and add about 5 drops down the center, then dry puffs and low watt setting then work up to wattage you like. In my case I like it at about 30 watts.

 

[Imfallen_Angel]

Max wattage recommended = 35W

I recommend that you don't use Max VG with ceramic coils (it's just not fluid enough), nor high sweetener liquids, they'll clog the pores fast and badly.

You have to prime with several drops in center, then push liquids in the side holes, holding in sideways until the liquid starts showing in the other holes, turn slowly to have the liquid soak within the cartridge, turn and prime next hole. Take your time unless the liquid doesn't look like it's being sucked in.

Then close tank up, fill, give it a few good "closed airflow" pulls, give it a minute then you should be good to go.

The ceramic may take about 1/2 an hour to be fully saturated as you use it.

If you're tasting something weird, it's simply not saturated yet and/or your wattage is too high. Start your wattage really low (15W), and work your way up a few pulls at a time.. as it heats up, it'll help saturate the ceramic (warm/hot liquid is more fluid).