Designed for ease of use and portability, the Vaptio AirGo PCC Kit consists of a buttonless pod system, a compact charging case and a spare cartridge. First let's take a look at the charging case, which is made of plastic in an ultra-portable size. It uses a unique flip-type design, similar to the well-known headphone case, perfectly prevents the pods from dust and dirt, thereby keeping them clean and fresh.
Hidden under the cover are two compartments, one for storing the pod system and the other for storing the spare cartridge. The charging case has a capacity of 700mAh, which is able to charge the pod vape for 7 times. In addtion, there is an LED light on the sidewall to indicate the battery level. On the front, you can see another three-color light to indicate the charge level of the battery built-in the case.
Now, let's go back to the AirGo Pod Kit itself. Constructed in a very small dimension, it comes with a minimalistic mod made from similar polymers and painted in the color of the case. As mentioned above, this pod system kit does not have any buttons but only a small LED and a Type-C charging interface, automatically activated when you inhale. The capacity of the AirGo Pod Kit is 80mAh, which can last for approximately 40~50 puffs, depending on your personal vaping habits. For a full charge, 5 minutes is enough. As for the replacement cartridge, it has a capacity of 1.5ml with an integrated 1.0ohm coil, and can be filled through the small hole on the side.
Parameters:
AirGo PCC Kit
Size: 73.2 × 50 × 24.2mm
Material: PC
Battery Capacity: 700mAh
Charge Port: Type-C
Charge Current: 5V/1.5A
AirGo Pod Kit
Size: 64.4 × 20.6 × 10.6mm
Battery Capacity: 80mAh
Pod Capacity: 1.5ml
Fill: Side fill
Resistance: 1.0ohm (cotton)
Order it on [Pre-order] Vaptio AirGo PCC Kit 700mAh+80mAh Pod System Kit
You may also be interested in:
geekvape aegis pod system
dead rabbit se rda price
Hidden under the cover are two compartments, one for storing the pod system and the other for storing the spare cartridge. The charging case has a capacity of 700mAh, which is able to charge the pod vape for 7 times. In addtion, there is an LED light on the sidewall to indicate the battery level. On the front, you can see another three-color light to indicate the charge level of the battery built-in the case.
Now, let's go back to the AirGo Pod Kit itself. Constructed in a very small dimension, it comes with a minimalistic mod made from similar polymers and painted in the color of the case. As mentioned above, this pod system kit does not have any buttons but only a small LED and a Type-C charging interface, automatically activated when you inhale. The capacity of the AirGo Pod Kit is 80mAh, which can last for approximately 40~50 puffs, depending on your personal vaping habits. For a full charge, 5 minutes is enough. As for the replacement cartridge, it has a capacity of 1.5ml with an integrated 1.0ohm coil, and can be filled through the small hole on the side.
Parameters:
AirGo PCC Kit
Size: 73.2 × 50 × 24.2mm
Material: PC
Battery Capacity: 700mAh
Charge Port: Type-C
Charge Current: 5V/1.5A
AirGo Pod Kit
Size: 64.4 × 20.6 × 10.6mm
Battery Capacity: 80mAh
Pod Capacity: 1.5ml
Fill: Side fill
Resistance: 1.0ohm (cotton)
Order it on [Pre-order] Vaptio AirGo PCC Kit 700mAh+80mAh Pod System Kit
You may also be interested in:
geekvape aegis pod system
dead rabbit se rda price
