Vaptio AirGo

[Frenkyou]

Will Vaptio AirGo be the vape of the future?

Let's see specifically how this interesting project was developed.

Enjoy the reading.

The packaging is black, the AirGo kit is shown on the front, while the contents, color options, warnings in seven languages, manufacturer addresses, logos and brands are listed in the rear area. On the side we find the scratch and check, the indication of the color contained inside and a QR Code.

The two White and Gray Samples at the first opening of the package.

The AirGo Kit includes:
1 AirGo Box
1 AirGo mod
2 1.5 ml refillable cartridges
1 Micro USB charging cable
1 User manual

Features:
AirGo Box battery: 700mAh
AirGo Mod Battery: 80mAh
Maximum power: 11W
Inhalation: automatic
Vaping Type: MTL
Charging method: lateral
Coil: 1.0 Ω
Dimensions: AirGo Box 73.2×50x24.2 mm
Dimensions: AirGo Mod 64.4×20.6x10.3 mm
Construction materials: Aluminum alloy, PC, PCTG.
Kit weight: 73gr

The colors available for this kit are three: Gray, White and Aurora Blue, recently Vaptio has released silicone cases of different colors.

The AirGo Box is practically a Power Bank with a capacity of 700 mAh capable of recharging the tiny AirGo Mod from 80 mAh up to 7 times, also allows you to carry the device for vaping (AirGo Mod) and a replacement cartridge from 1,5Ml away from dust and dirt.

Every time the AirGo Box is opened or during the recharging phase there are three notches that light up in white indicating the level of charge of the Powerbank, while when we insert the mod only one led shows its recharging status, red LED in charge , green led charge completed. The charging time of the Mod is about five minutes.

The AirGo Box seen in front and behind.

On the left the Box with the spare cartridge and the Mod inside, on the right we see the inside of the Box with the two compartments respectively for the cartridge and for the mod, in the compartment intended for the mod we can see on the bottom the contact pins for its recharge.

 

[Frenkyou]

The USB Type-C charging port is located on the bottom of the AirGo Box.

Pictures of the kit, note the aluminum alloy collar that covers the two housings. The flap (ensures Vaptio) withstands over 100,000 openings / closings, is magnetized effectively and closes with a nice sound clack!

The small Mod works with automatic shooting, weighs about 15gr and is built in plastic-coated aluminum alloy, on its body we can see the LED indicating its state of charge and the two very small air-flow holes placed on the sides.

Inside the Mod we see the two contact pins for the cartridge, two magnets and the hole for the automatic shooting, on the bottom of the Mod there are instead the contacts for the refill that will be carried out once positioned inside the Box.

The 1.5ml cartridge is made of PCTG and houses a 1.0 Ω coil inside, comes with an adhesive placed on the contacts to prevent it from being accidentally activated during transport, once the adhesive is removed we can see the two air supply holes.

Disposable cartridges can be purchased three at a time.

The refill is carried out by lifting the rigid side cap, the hole below is large enough to accommodate bottles with a fairly large spout, however, since the coil is close to the hole and to avoid liquid leaks, it is necessary to squeeze very slowly if you do not have a bottle with needle able to penetrate to the side of the coil deeper.

Conclusions:

I really liked this AirGo at the project level; finally something innovative and different, I find it smart refined and also very elegant, the construction materials seem solid as well as the truly exceptional portability, congratulations Vaptio for me AirGo is a very good idea.

After having loaded the 1.5ML into the cartridge, it is necessary to wait at least five minutes to allow the cotton of the coil to become impregnated with liquid, the shot that the Mod gives at about 11W is a very well calibrated MTL and the aromatic yield is at the levels of the best achievements of the mini / automatic segment, the hit is perceived very well even with small concentrations' mg / ml, the emission of steam is not colossal but is however well related. The duration of the 80mAh Mod charge varies from 20 to 50 shots depending on their length, I testify to about 30 shots, who do you recommend? I can definitely recommend it to all those who want an elegant device or those who want to make a “moderate” and pleasant vape not suitable for conpulsive even if the 80mAh mod inserted in the powerbank recharges in less than five minutes, the 700mAh powerbank thanks to the fast charging of type C it charges in less than 10 minutes ... For this reason I don't think that in the meantime even the most compulsive of vaper's can think of running from the tobacconist. Ultimately at the cost of being repetitive I think it is particularly suitable for those who want to vape with class and elegance in a discreet and sober way with a kit with really many Pros and few defects.

Pro:
Smart and innovative project
Refined design
Material pleasant to the touch
Liquid visibility
Dimensions and weight
hit
MTL aromatic yield
No loss of liquid
Charging speed of both the Mod and the PowerBank

Tips:
Facilitate the refill

Vaptio family photos:

More information can be found here: www.vaptio.com/AirGo.html

Thank You.

 

[Mantas]

Thanks for the review. How does it compare to Uwell Caliburn in terms of flavor and vape warmth?

 

[Frenkyou]

it's even