VG dilution ratio?

[Nadine]

Hi there. I'm looking for a recipe for 100% VG 0 nic. 0 flavor. (Just to try)
What is best for thinning? Distiller water? Does anyone have a ratio they like?
TIA!

 

[windozehater]

first try hot tanking it, it has worked for me for all my vg's. what you do is fill a large mug or bowl with hot tap water then microwave it for 2 min., then take your vg juice in a tightly sealed bottle and put it in the hot water leave it sit till the water cools to room temp. (dont microwave the juice) the juice will always be thin when its warm of course, but now it will also be thinner all the time, have used this method on boba's and big red from gns vapor both very thick, the viscosity is good enough for a stardust to wick (although not chain vaping)

 

[Buggs5347]

I use distilled water. The ratio I prefer is 15 drops per 10mL of juice.

 

[Cyrus Vap]

If its raw VG with nothing else I use 15-20 % distilled water , as high as 23 or so for pesky top coils that struggle to wick

 

[Nadine]

Thank you! I'll try hot tanking first. Then dilute if needed.

 

[glassmanoak]

My usual ejuice is 20PG/80VG, the 20% being PG or flavorings. I've used VG plus 10% Distilled Water and that worked fine.

 

[Nadine]

I've had some success! I used a clean glass 1oz bottle and filled 80% with USP VG. Let it soak in hot water till cool. Then I added 4 dropper fills of 8mg flavored VG, topped off with distilled water. I'm getting lots of vapor, a little flavor and reduced nic. (Saving a little money too)