Video- 510 Atomizer at different voltages and Nic. Milligram Usage- Atomizer Alignment explained!

[Robert]

I hope this vid. helps some new people to the forum. This is my take on the 510 atomizer used at different voltages. Also- my take on the use of different nicotine levels @ various voltages.

Atomizer Alignment is explain for those who don't do it or think it dosen't matter.

I meant to say CR2's at full charge are 3.6 so 3.6x2= 7.4

The inline regulator while it dose not allow the CR2's in my mod to go below 2.5 volt. I would still advise caution when using any re-chargable batteries.

YouTube - 510 Atomizer at dif Volts

 

[Mufftrix]

Than`s Robert nice review!

Have to agree 6v is to much imo except maybe with the 801?

Will have to try a 5v sometime, sounds as if that could be the happy medium?

 

[gooney0]

Thanks for the video.

I would think more vapor means you're using more juice per puff. This would explain why lower mg juice would be more satisfying at higher voltage. You could also expect more intense flavor as well.

-Gooney0

 

[Robert]

Thanks for the video.

I would think more vapor means you're using more juice per puff. This would explain why lower mg juice would be more satisfying at higher voltage. You could also expect more intense flavor as well.

-Gooney0

The lower mg juice I use is Nhaler High Voltage Juice it has more flavor added- Flavor tends to go away at higher voltage- with other e-liquid. From what I heard.

 

[Zaibach333]

great info thanks!

 

[googled]

Good info and your mods look really neat. The California bit at the start made me laugh .

 

[Joe81]

atty alignment hehe, yep, when i first started i was aligning it with the coil by mistake, burned some carts that way...until i actually gave it more than a glance & noticed the cart shaped hole around the coil, my fault i was sloppy hehe...also, seen ur mod around before, thanx for the vid on it...

 

[SharpandPointy]

I have been through this forum a hundred times and never heard of aligning the carts. I never had the burning issue. I recently ordered some new 510 atomizers that had the round carts on them instead of the whistle tips. Last night I learned why alignment is necessary. I plugged a freshly filled round cart into the 510 and inhaled a nice lung full of burnt plastic. Nasty, Nasty, Nasty. Now I align them ALL. I don't want that to happen again.

 

[Crash]

"show the pink one"

haha nice video explanation.

 

[Robert]

"show the pink one"

haha nice video explanation.

That right Sir- We have Pink

I will donate 2$ to Breast Cancer Research for every pink PV I sell.

Save the Ta Ta's

 

[Robert]

I have been through this forum a hundred times and never heard of aligning the carts. I never had the burning issue. I recently ordered some new 510 atomizers that had the round carts on them instead of the whistle tips. Last night I learned why alignment is necessary. I plugged a freshly filled round cart into the 510 and inhaled a nice lung full of burnt plastic. Nasty, Nasty, Nasty. Now I align them ALL. I don't want that to happen again.

I have said a few time- glad you got it!


See the Dots on my atty and cart? Paint those on for easier alignment!

Fingernail polish in a little bump- and you can align with eyes closed!

 

[Crash]

That right Sir- We have Pink

I will donate 2$ to Breast Cancer Research for every pink PV I sell.

Save the Ta Ta's

Ta Ta's lmao, good luck man

 

[muddstar]

Robert, is there any truth to the rumor, Once you have 5 volts you never go back?

 

[Robert]

Robert, is there any truth to the rumor, Once you have 5 volts you never go back?

Well for me Yes, I looked around and thought why is the Podigy at 5 volts? It is easy to get a tube and put a button on it, some shiny some brass or home depo copper. All just direct voltage from 2 batteries.

When I made my multi volt mod I quickly learned thet 6 volts was too high. The flavor of even High Volt juice from nhaler suffered at 6 volt.

The 5 volt side was perfect! Thanks PS Podigy for figuring out still crucial piece of info- I will copy it.

Now I only will make a 5 volt PV. My new mods have LED lights, to tell you if the lockout switch is on or not (convienent to know before it goes in your pocket) and some light up when you hit it. Next will be both!

but Yeah 5 volt is really better than 6 and it gives you a huge cloud of vapor!

 

[Robert]

Muddstar- Did you get yours yet?

 

[muddstar]

I was hoping to get it Sat., it was not to be. I'm counting on Mon. Is it the one that was in the vid? It looked pretty nice and the vapor looked to be killer, I'm a vapor cloud freak.

 

[StephenJP]

That right Sir- We have Pink

I will donate 2$ to Breast Cancer Research for every pink PV I sell.

Save the Ta Ta's

Where do you sell them ? and where do you get the inline resistor - ifin ya don't mind me askin
StephenJP

 

[Beer Man]

More tasty info. Thanks!

Oh yeah, I lived in Pt. Loma for a number of years and became a gun nut in the process.

 

[Robert]

Where do you sell them ? and where do you get the inline resistor - ifin ya don't mind me askin
StephenJP

The regulator comes from TI though Mouser Electronics

I am selling these- http://www.e-cigarette-forum.com/fo...ut-silver-green-pink-red-black-detonator.html

These are my newest ones- http://www.e-cigarette-forum.com/fo...w-leds-5-volt-detonator-2-leds-green-red.html

PM me for details!