Vision Eternity Questions

[Slummy]

Hey guys, i recently got a vision eternity and have a question....

i noticed the wicks it comes with dont go into the bottom well. so sometimes when vaping if i start to get a flavorless taste, if i put it on a downward slant and let the juice run from the well onto the wicks then it vapes nice again. I was wondering if it would be better to use a longer wick and tuck it down into the bottom well. just thought this would help it hold more juice and less leaking with over fill. but how will this effect performance? will it still vape well?

 

[hazozita]

I've had very good performance with a longer wick. I usually cut mine quite a bit longer than the stock wick and tuck the tails into the well. It helps draw up the juice in the well better without having to tilt. No problems with the longer wick and leaking provided that the tails are placed so they don't interfere with the threads. It helps to wet the wicks before putting on the top cap so the wicks stay in place and don't flop out.

 

[cope]

my et works good i use it often as it being my first rba. i chain vape heavy with it and it gets warm but not hot. i have it on a provari mini @ 4-4.3v ya it leaks when you overfill it but it will clear out after a few good vapes..
i dident like the draw with the ego shield thingy..lol but i have a mini now and have no need for ego stuff anymore
i usually get 2 weeks on a coil i make its a good starting rba

 

[Slummy]

thanks for the replies.... i was also wondering if anybody could answer...

the middle tank park with a spike and wick running through the centre of it. my understanding is that this wick is mainly for use with the cartridge. since i have no interest in using the cartridge, i just want to drip, would the vision ET work just as well or better if i removed this center wick? i noticed the bottom of the center wick looks to be getting burnt.

i have been using the vision eternity for about 3 1/2 days now, on the first coil on wick. roughly how long should each coil and wick last? i am starting to get a real nasty plasticy or silica taste from it now. i thought the atty would last longer, maybe a week, but maybe its time to rebuild it?

 

[space_frog]

I ordered mine and waiting for it... I wonder if someone uses a SS mesh on it?

 

[Slummy]

thanks for the replies.... i was also wondering if anybody could answer...

the middle tank park with a spike and wick running through the centre of it. my understanding is that this wick is mainly for use with the cartridge. since i have no interest in using the cartridge, i just want to drip, would the vision ET work just as well or better if i removed this center wick? i noticed the bottom of the center wick looks to be getting burnt.

i have been using the vision eternity for about 3 1/2 days now, on the first coil on wick. roughly how long should each coil and wick last? i am starting to get a real nasty plasticy or silica taste from it now. i thought the atty would last longer, maybe a week, but maybe its time to rebuild it?

well i decided to rewick it. works perfect now. looks like i may have burnt the silica a little when dry burning after rinsing. will have to be more careful or dont dry burn in the future.

i also decided to pull out that center wick of the spike. i cant say there are any massive noticeable differences, but i do think it is performing better. the draw seems a bit better, and i reckon the taste is a little cleaner than it would be after a couple times use.

 

[dragon dj]

guys please help...
can i get the coil base alone cuz i dropped my VE last week and the thread broke
so does anybody know that if i can buy just the base??

 

[FastRay]

Should be getting my Eternity in the mail tomorrow. Will be my first Rebuildable. Hope to learn from it and move from there.

 

[vap2112]

I Just Got home and my VE was in the mail. I love it, Grape ice has never tasted this good. I have only used cheap disposable clearos until now. But so far Vaping my vision Eternity is great. have only had juice in it for 30 min. so will post after a few days if I have any issues with it. I have a kanger pro tank also, haven't taken it out the box yet.

 

[glenharris1971]

This is a great RBA. Super easy rebuild, no leaks just don't overfill. I like using nichrome and cotton wicks.

 

[pestantonjr]

HI everybody,
Vaping an ET as I type this. First it's great as a driper but, cut your wicks so they drop down into the well. I've used all types of drip tips with no problems. although one was loose so I changed the o ring ( white to Black ) and it was good to go. I've used the tank a couple of times but be careful, if you let it seat to long (over night) it will wick down and out the air way. Depending on liquid level, its best to just pull the tank out. It does get hot depending on you and your set up (resistance, length of enhale and amount of vapes you take at a time).

 

[djeleveneleven]

I have a Vision Eternity and agree with what you wrote. I found it to be far from satisfactory and wish I had not spent the money on it. Have read several reports of loose posts causing problems. The draw was not to my liking either. I think there are far better products on the market for the same, or less, money.

I totally agree I cant get it right ! It tastes like crap