Vision Eternity

[Jazzi Mike]

Hey I'm ordering some Cisco Spec Attys from Avid Vaper. They pretty good and I carry them in case my RM2 coils goes out when I am out. Anyhow, I noticed they sell the Vision Eternity and I'm thinking about getting one to play around with. I know in the rba section, it says it will work as a bottom feeder.

I am wondering if any of you guys have had any experience with the Vision Eternity on your REOs? I know the RM2 is probably better, but I have 2 of them. I just am curious how the Eternity works on the Reo.

 

[Treebeard]

Mine was crap out of the box. Burrs on the threads. Limited wire size. Poor quality. Holes were not fully drilled. Center pin was uber loose and had to try to stuff some silicone between the pin and the 510 for fear that it would short my mod. Hated the wire capture system. Harsh vape...maybe could have made that work but it was more trouble than it was worth compared to an RM2 or Cyclone or even a $5 ERA clone. And that big ol center spike was just silly.Maybe they've improved the quality lately, I dunno.YMMV.

edit: And I hated the air hole in the bottom threads.

 

[MamaTried]

my experience was a little better than Tree's, but not by much. Fasttech has them pretty cheap, or did a while back.

 

[FACE MEAT]

Get yourself a mini Era clone from Fasttech instead. $4.77 RDA Mini Rebuildable Dripping Atomizer (1.0mL) - 2.4

They're easily modified to bottom feed, work quite well and are cheap as dirt. It'll never perform like the RM2, but they're fun to play around with.