VooPoo Argus Gt 160W
This KIt was sent to me for review by sourcemore, thank you.
On the front side of the package we naturally find the image of the product, the Argus GT writing, at the bottom the name of the brand and the color of the Sample inside are shown.
In the back they are listed; the content, warnings, place of manufacture, scratch&check, barcode, trademarks & logos.
Unusual, precious and elegant, the internal rigid plastic packaging has the appearance of a suitcase containing military electronic equipment, inside the kit components are neatly placed on a soft black sponge.
Kit contents:
1x VooPoo Argus GT
1x Atomizer Pnp 4.5ml
1x Coil Pnp-VM5 0.2Ω range 40-60W
1x Coil Pnp-VM6 0.15Ω range 60-80W
1x Type-C cable
1x User Manual
Argus GT features:
Dimensions: 86.5x51.3x26.1mm
Argus Gt Kit Weight: 141g (without batteries)
Maximum output: 160W
Chipset: GENE.TT chip
Charge: USB Type-C port
Power Range: 5-160W
Coil range: 0.1-3.0Ω
Output voltage: 6.4-8.4V.
Screen: 0.96 "OLED color display
Supported Modes: Smart Mode, VW. TC- NI-TI-SS Modes.
Battery: Dual 18650 Battery (not included)
Material: Zinc Alloy + Plastic + Leather (or fabric)
Advanced GENE.TT chip with 8 safety protections:
Time Out protection 10s
Short circuit protection
Overload protection
Output protection
Low charge protection
High temperature protection
Battery reverse protection
Balanced charge protection
With a weight of only 140g (box + Atom) the Argus GT is the ideal dual battery mod for those looking for performance and handling.
To make an idea weighs 50 grams less than the Drag2 refresh, this makes it very versatile and comfortable for outdoor outings.
Color range:
Carbon Fiber, Vintage Gray, Dark Blue, Black & Red, Black & Blue.
The graphics and the material of the inserts vary according to the chosen color model.
How the Argus GT is made:
Compared to the Drag and to significantly reduce its weight, VooPoo has made extensive use of good quality plastic material.
Much of the plastic material in the perimeter of this Mod is decorated with lots of "bubbles" to create a sort of wet effect.
The inserts in Eco leather (Carbon Fiber version) or fabric (Dark blue version) are soft and padded, the one in fabric is elegantly finished with visible stitching.
The USB Type-C port is effectively protected by a rigid rubber cap.
The side profile of the Argus GT highlights a plastic material mask fixed to the mod by six cross screws (three per side), this frame varies in color and shades depending on the version.
The VooPoo writing is imprinted on the panel of the Carbon Fiber version, while in the Dark blue version it is colored and embossed, embellished with two seams of the same color that run in parallel.
The front of the Mod houses the Fire button at the top. The key is slightly protruding, its shape is rectangular, in the center it houses a circular recess particularly comfortable for the fingertip.
On the 0.96 "color display at the top next to the Argus writing we can view the charge of the cells, the wattage and the current vaping mode.
The intelligent vape mode is indicated next to the vattage with "S" and with R the RBA vape mode, using one or the other function the screen turns yellow for the first, blue for the second option.
There is also information on the ohm of the coil and on the volts in delivery.
The font of the temperature control screen (NI, TI, SS) is green.
On the disply there is a graphic equalizer that lights up according to the length of the last Puff, below we find the Puff counter and the duration time of the last Puff.
The back of the mod is optimally shaped to be gripped and is decorated with the ARGUS written vertically.
In the upper part screwed with two French screws we find the off-centered cup and slightly raised to avoid signs of wear.
Pin is spring loaded gold / plated.
On the Argus GT it is possible to install atomizers up to ø26mm without protrusions.
On the bottom of the Mod we find the writing "designed by VooPoo" the C E mark, the disposal logo and the indication of the opening direction to access the battery compartment.
This KIt was sent to me for review by sourcemore, thank you.
On the front side of the package we naturally find the image of the product, the Argus GT writing, at the bottom the name of the brand and the color of the Sample inside are shown.
In the back they are listed; the content, warnings, place of manufacture, scratch&check, barcode, trademarks & logos.
Unusual, precious and elegant, the internal rigid plastic packaging has the appearance of a suitcase containing military electronic equipment, inside the kit components are neatly placed on a soft black sponge.
Kit contents:
1x VooPoo Argus GT
1x Atomizer Pnp 4.5ml
1x Coil Pnp-VM5 0.2Ω range 40-60W
1x Coil Pnp-VM6 0.15Ω range 60-80W
1x Type-C cable
1x User Manual
Argus GT features:
Dimensions: 86.5x51.3x26.1mm
Argus Gt Kit Weight: 141g (without batteries)
Maximum output: 160W
Chipset: GENE.TT chip
Charge: USB Type-C port
Power Range: 5-160W
Coil range: 0.1-3.0Ω
Output voltage: 6.4-8.4V.
Screen: 0.96 "OLED color display
Supported Modes: Smart Mode, VW. TC- NI-TI-SS Modes.
Battery: Dual 18650 Battery (not included)
Material: Zinc Alloy + Plastic + Leather (or fabric)
Advanced GENE.TT chip with 8 safety protections:
Time Out protection 10s
Short circuit protection
Overload protection
Output protection
Low charge protection
High temperature protection
Battery reverse protection
Balanced charge protection
With a weight of only 140g (box + Atom) the Argus GT is the ideal dual battery mod for those looking for performance and handling.
To make an idea weighs 50 grams less than the Drag2 refresh, this makes it very versatile and comfortable for outdoor outings.
Color range:
Carbon Fiber, Vintage Gray, Dark Blue, Black & Red, Black & Blue.
The graphics and the material of the inserts vary according to the chosen color model.
How the Argus GT is made:
Compared to the Drag and to significantly reduce its weight, VooPoo has made extensive use of good quality plastic material.
Much of the plastic material in the perimeter of this Mod is decorated with lots of "bubbles" to create a sort of wet effect.
The inserts in Eco leather (Carbon Fiber version) or fabric (Dark blue version) are soft and padded, the one in fabric is elegantly finished with visible stitching.
The USB Type-C port is effectively protected by a rigid rubber cap.
The side profile of the Argus GT highlights a plastic material mask fixed to the mod by six cross screws (three per side), this frame varies in color and shades depending on the version.
The VooPoo writing is imprinted on the panel of the Carbon Fiber version, while in the Dark blue version it is colored and embossed, embellished with two seams of the same color that run in parallel.
The front of the Mod houses the Fire button at the top. The key is slightly protruding, its shape is rectangular, in the center it houses a circular recess particularly comfortable for the fingertip.
On the 0.96 "color display at the top next to the Argus writing we can view the charge of the cells, the wattage and the current vaping mode.
The intelligent vape mode is indicated next to the vattage with "S" and with R the RBA vape mode, using one or the other function the screen turns yellow for the first, blue for the second option.
There is also information on the ohm of the coil and on the volts in delivery.
The font of the temperature control screen (NI, TI, SS) is green.
On the disply there is a graphic equalizer that lights up according to the length of the last Puff, below we find the Puff counter and the duration time of the last Puff.
The back of the mod is optimally shaped to be gripped and is decorated with the ARGUS written vertically.
In the upper part screwed with two French screws we find the off-centered cup and slightly raised to avoid signs of wear.
Pin is spring loaded gold / plated.
On the Argus GT it is possible to install atomizers up to ø26mm without protrusions.
On the bottom of the Mod we find the writing "designed by VooPoo" the C E mark, the disposal logo and the indication of the opening direction to access the battery compartment.