VooPoo Doric 20 MTL KIT Review By Frenkyou

Status
Not open for further replies.

Frenkyou

Ultra Member
ECF Veteran
  • Apr 26, 2019
    1,643
    1,658
    55
    italy
    www.svapo.it
    VooPoo Doric 20 MTL KIT 1.jpg


    Voopoo Doric 20 Pod Kit is powered by 1500mAh battery with type C fast charging, has dual vaping modes; automatic and push button. The LED communicates to the user the operation of the device and the percentage of charge of the cell according to the color of the LED lights. The 2ml Pod tank is compatible with all ITO series coils. The refill is of the lateral watertight type.

    ► Before we start let's take a look at the main features made known by VooPoo:
    1. Matte finish, comfortable grip
    2. 1500mAh internal battery, Type-C fast charging, 8-18W output
    3. LED lights to show the output
    4. MTL vaping
    5. Automatic or button mode
    6. 2ml cartridge, leak proof side fill design
    7. Compatible with all ITO series coils

    ► VooPoo Doric 20; Packaging:
    The black shaded cardboard box shows on the front; The brand name (VooPoo) at the top, the image of this item in the center and its name at the bottom (Doric 20).

    On the back of the box and under the product name, they are listed; the content, scrath & check, warnings, contact information of Woody Vapes Technology C0., Ltd, logos / trademarks required by law.

    VooPoo Doric 20 MTL KIT 2.jpg


    On the side profile of the package there are; the color indication of this sample (Light Gray), two barcodes, the social media icons where the brand promotes its business, a QR-code and three of the main features in the form of icons.

    VooPoo Doric 20 MTL KIT 3.jpg


    ► VooPoo Doric 20; Packing List:
    • 1 * Doric 20 device
    • 1 * ITO Pod Atomizer (2ml)
    • 1 * Coil ITO-M2, 1.0Ω
    • 1 * Coil ITO-M3, 1.2Ω
    • 1 * Type-C cable for charging
    • 1 * User Manual

    VooPoo Doric 20 MTL KIT 4.jpg


    ► VooPoo Doric 20; Parameters:
    • Dimensions: 124x19mm
    • Material: zinc and PCTG
    • Maximum power: 18W
    • Coil Resistance: 1.0 / 1.2Ω
    • Battery: 1500mAh (Integrated)
    • Output voltage: 3.2-4.2V
    • Charging: Type-C 5V / 1A
    • Tank capacity: 2.0ml
    • Compatible with all ITO Coils
    • Output mode: Bypass

    VooPoo Doric 20 MTL KIT 5.jpg


    ► VooPoo Doric 20; Available colours:
    • Space Gray, Pale Gold, Ice Blue, Olive Green, Rose Gold.

    VooPoo Doric 20 MTL KIT 6.JPG


    ► VooPoo Doric 20; First impressions:
    Doric 20 MTL is the new minimalist kit by VooPoo that is inspired in the design by the older brother Doric 60, Review: VooPoo Doric 60 review By Frenkyou

    VooPoo Doric 20 MTL KIT 7.jpg


    Doric 20 is a device created for MTL vaping and is equipped with a food-grade PCTG cartridge that houses special ITO resistors.
    The aesthetic is minimal and the smooth shapes with reduced diameter enhance the ease of grip, the light alloy makes Doric 20 like a feather. The single button and the single LED light make it easy to use even for beginners. Particularly of no small importance is the possibility of using Doric 20 both in manual and automatic mode. The automatic puff seems to be working correctly.

    VooPoo Doric 20 MTL KIT 8.jpg


    ► VooPoo Doric 20; Front / rear view:
    There is not much to describe, the front houses the LED at the top and the slightly protruding oval-shaped control key, while at the bottom, vertically arranged, there is the writing "doric",

    On the back at the top there is the AFC internal adjustment ring controlled by a steel knob that allows you to choke 3 holes, two of 0.6mm and one of 0.8mm. Just below there is the Type-C 5V / 1A charging socket and at the bottom the wording "VooPoo".

    VooPoo Doric 20 MTL KIT 9.jpg


    ► VooPoo Doric 20; Top / bottom view:
    The pod compartment contains the spring-loaded, gold-plated contact pins. Also on the bottom and hidden by the metal ring is the sensor for the automatic puff raised above the bottom. The cartridge does not use anchoring magnets in the compartment, but a rather effective interlocking system

    On the bottom of Doric 20 there is a circle of soft material with two safety vent holes. The soft material, in addition to muffling the noise when resting on the table, also increases the grip with the surface.

    VooPoo Doric 20 MTL KIT 10.jpg
     

    Frenkyou

    Ultra Member
    ECF Veteran
  • Apr 26, 2019
    1,643
    1,658
    55
    italy
    www.svapo.it
    ► VooPoo Doric 20; ITO cartridge:
    The 2ml Ito transparent cartridge has been developed to contain the homonymous (ITO) coils for MTL. It is a cartridge with a circular design of reduced dimensions compared to other VooPoo realizations, the drip-tip is fixed and not replaceable. The resistors are inserted from below.

    VooPoo Doric 20 MTL KIT 11.jpg


    VooPoo Doric 20 MTL KIT 12.jpg


    ► ITO Anti-Leakage Structure:
    The system of this cartridge provides two slots with an internal air passage to a rather elaborate cavity, this solution to the proof of the facts effectively protects the Mod from condensation of the electronic liquid.

    VooPoo Doric 20 MTL KIT 13.JPG


    VooPoo Doric 20 MTL KIT 14.JPG


    ► ITO Coil:
    The kit includes a 1.0Ω ITO-M2 Coil and a 1.2Ω ITO-M3 Coil
    The 1.0Ω ITO-M2 Coil is recommended for use at 12W, the selectable values are Green LED 14W, Blue LED 12W, Red LED 10W, the best compromise is certainly to alternate two 0.6mm AFC holes to a completely solution. open with two 0.6mm holes + the 0.8mm hole. The puff is soft and velvety, tightened in the right way for a fairly airy MTL use.

    For the 1.2Ω ITO-M3 coil The recommended power is 10W, the selectable values are Green LED 12W, Blue LED 10W, Red LED 8W, I was happy to use and alternate two 0.6mm holes with a single 0.6mm hole mm. Also in this case the puff is fluid without spitting. Intake contrast is perfect for MTL.

    With both resistances the aromatic yield is of a good level, I do not find any particular "thrust" differences between one power step and another. Condensation and losses are zero.

    VooPoo Doric 20 MTL KIT 15.jpg


    VooPoo Doric 20 MTL KIT 16.jpg


    ► VooPoo Doric 20; Operation Guide
    • Power On / Off: Press the button five times.
    • Auto-lock: The device automatically locks the button after 15 minutes of inactivity, a short press on the button or the auto-draw function will wake the device.
    • Power Adjustment: Press the button three times to adjust 3 different output levels. The green, blue and red light represent respectively
    high, medium and low.

    ► Battery Instructions:
    Battery percentages 66% -100% Indicator light Green
    Battery percentages 33% -66% Indicator light Blue
    Battery percentages <33% Indicator light Red
    Note:
    When vaping on low battery, the device will no longer work once the red light has flashed ten times.

    ► Instructions for the indicator light:
    • The battery is charging. The corresponding indicator flashes
    • Charging is complete Three white lights will remain on
    In normal working mode The corresponding indicator light will gradually become brighter.
    Low battery The red indicator light flashes 10 times
    Light Indicator

    ► In Use:
    • Short The indicator light is solid red once
    • Check the atomizer The indicator light flashes red once
    • In Pause The indicator light flashes red 8 times
    • High temperature The indicator light blinks red 15 times

    VooPoo Doric 20 MTL KIT 17.JPG


    ► Safety protections:
    • 8s overuse protection
    • Output overcurrent protection
    • Low battery protection
    • Protection against high temperatures
    • Overload protection
    • Short circuit protection of the atomizer

    VooPoo Doric 20 MTL KIT 18.jpg


    Final conclusions:
    Doric 20 like Doric 60 has only one flaw that did not convince me but that for most people it could be irrelevant and concerns the cut-off calibrated to intervene after only 5 seconds of continuous shooting. This happens only with the use of the key while in the automatic suction mode the time limit seems to be the standard one of 8-10 seconds. I do not understand this different cut-off intervention threshold according to automatic or manual use.

    The positive notes as I extensively described during the review are many and concern the total absence of losses and the good performance of the ITO coils for MTL. The battery recharges quite quickly in about 60 minutes and offers a very good autonomy.

    Aesthetically I like the product, although there is nothing innovative in its appearance and in its form factor Doric 20 is well built and made, certainly cheap for those who want to spend little for a product suitable for entry level use.

    Thanks for reading.

    Thanks to VooPoo for sending me the sample for review.
    VOOPOO VAPE Spark Your Moments

    VooPoo Doric 20 MTL KIT 19.jpg
     
    Status
    Not open for further replies.

    Users who are viewing this thread