Want to get into dripping...

[Desecrate]

I'd like a RDA but a buget one. I'm on a pretty strict buget atm. I own a Kayfun and rebuild my own coils, ohm meter, Smoktech SID. So I know rebuilding, spent so much time diong different coils on what I have, different wicking ways all of that.

Anyhow, can anyone point me to a budget dripper a RDA so I can rebuild it, I love rebuilding. I know there are clones of clones and all of that. I watch RIP Trippers all the time, which his market is for high end drippers and mech mods and regulated devices for VW. But his videos educated me ALOT over the last year or so. I just got into the Kayfun and my SID. I was rebuilding my coils on Kanger Protank 2 since I got it. Any recommendations for a budget RDA prefer 22mm to fit the SID like a Kayfun which I know most of them are. Anyhow any recommendations for a budget one would be appreciated. Thanks!

 

[Cullin Kin]

Patriot V2
Tobh Atty V2
Stillare
Any IGO
Omega (Although some don't like the deep well)
Helios
Enigma

All of these are usually under $25.00 (the clones, that is) and are great beginner RDA's.

 

[Despraci]

I am not a big RDA user, but I do have a Stillare for those times when the mood strikes and I love it. The clone cost me $20 bucks from a local shop.

 

[Desecrate]

Awesome thanks! Do you know if these all fit 510 drip tips? I'm sure they do since it is basically a standard on 99% of devies. I just ordered a wide boar drip tip, I'd like to throw on a dripper. I think for sure its a clone of it, I mean the actual one is 30 bucks and I dropped like 6 or so. But I wanted the double rings for the tight fit.

 

[Desecrate]

HA! RIP did a review on the non clone of the Stillare RDA, hmm lets see a clone price...

https://www.youtube.com/watch?v=PIjUlSt425k

 

[Cullin Kin]

Yeah, that tip will fit!

 

[Desecrate]

Yeah, that tip will fit!

Going to be werid putting the ohmz higher, since most do sub on these, the sid cant go belower than 1.2 - 1.3. I'm a single coil guy I wonder how it'd work. Alot are saying its a cooler vape. So I'm worried if I do higher ohmz and single coil it'd be to a cool vape hmmm.

 

[akpostal]

Check out Innokins Vapor Fordge. It was $30 at my B&M and it is better then my Omega clone by a lot. Lots of options will be available.

 

[BiLLi0]

I'm using the cheapest dripper possible. It's only to test new liquids and not to waste them.

As simple as an EVOD coil. I just remove the top part of the coil and it's done. You just need to be careful because it's small.

 

[Every1jockzjay]

Yepp, i use ebay they have all the best clone brands

 

[2naphish]

wrapping wires around the screw ( like the Omega) is a PITA, at least to me. i prefer the ease of build of the Brass Monkee . i have not used the clone but i suppose it would work as well the original. you will definitely want an adjustable airflow until you determine what works for you. most RDA's with holes have to be drilled out for proper airflow. its easy to drill it bigger but its very difficult to make smaller. good luck.

 

[Desecrate]

wrapping wires around the screw ( like the Omega) is a PITA, at least to me. i prefer the ease of build of the Brass Monkee . i have not used the clone but i suppose it would work as well the original. you will definitely want an adjustable airflow until you determine what works for you. most RDA's with holes have to be drilled out for proper airflow. its easy to drill it bigger but its very difficult to make smaller. good luck.

I think I'm going to try the Stilare clone by inifinite, I'm just worried ppl saying a cooler vape and its built for duel coil even though you CAN do a single coil. I'm a single coil guy, that also I have to bump up the ohmz around 1.3 or so for my SID to fire it, that if I did a single coil it'd be even cooler and with higher ohmz. I might just have to deal with doing a duel coil build, higher ohmz 1.3 or so close off the air alot to get a warmer vape, and max out the SID to 15w.

 

[Desecrate]

BTW I am using a overkill battery for a Smoktech SID but why not get a really good battery here's my battery -

Specifications:
Manufacturer: Sony
Model: US18650VTC4
Maximum Continuous Charging Current: 4A
Maximum Continuous Discharging Current: 30A
Rated Capacity: 2100mAh
Nominal Voltage: 3.6V
Maximum Charged Voltage: 4.25V
Minimum Discharge Voltage: 2.5V

 

[ToxicRVA]

I'm also on a pretty tight budget so I turned my sights to ebay for a dripper... I got a nimbus clone for $9.99 with free shipping, it was shipped pretty fast, ordered the 15th and got it the 19th.

I don't know what you're really looking for in a dripper but for the price it worked pretty good right out of the mail.

ATOMIZER-NIMBUS-CLONE-NEW-FREE-SHIPPING

The seller has a low rating so I took a chance, glad I did , turned out to be well worth it for me to get into dripping at a low price.

 

[ToxicRVA]

Going to be werid putting the ohmz higher, since most do sub on these, the sid cant go belower than 1.2 - 1.3. I'm a single coil guy I wonder how it'd work. Alot are saying its a cooler vape. So I'm worried if I do higher ohmz and single coil it'd be to a cool vape hmmm.

Also, on that nimbus I linked, it came with a pre built dual coil , my ohm meter showed it as 0.6 so I just took one of the coils out to get 1.2 , also came with extra coil/wick set ups and all of them are 1.2 - 1.6 when used as single coils. I'm using an MVP and it wont fire lower than around 0.9 so I'm in the same boat having to use 1.0 and higher coils, wicked properly, it's anything but a cool vape.

Somebody mentioned air... it does NOT have adjustable airflow, the holes in it work for me but that doesn't mean they'll work for everyone

 

[FranC]

I'm not a dripper either but I have a couple A7's that are rebuildable.

 

[Rwb1500]

Fasttech Magma clone is hard to beat for fifteen bucks. So is the Igo W.

 

[Bunnykiller]

Since you are going to be using the SID you may want to consider the Magma RDA... or the Stillare..

 

[Desecrate]

Man they already cloned the Magma? I just saw Pre-Orders on Tug Boat clones!

 

[Desecrate]

Since you are going to be using the SID you may want to consider the Magma RDA... or the Stillare..

Yeah, I'm kinda looking at that now from the last post as well. Not liking the look but, seems it does what I want to, and you can't be really picky on a mass buget.