Want2Vape - Atty Refresher

[dspin]

Ok, I've tried this a few times now and it works well for switching between flavors. Just put in a drop or two and dry vape since it contains PGA. If you don't mind that (I don't) go ahead and inhale also. Has a slightly sweet taste. Do this 2-3 times and you should be good to go.

For really hard to remove flavs like cinnammon,absinthe, etc put the atty in a condom (threaded end down) and fill up atty. Leave it sit awhile or overnight if you like. Blow it out and do a couple dry burns or dry vape it.
Leave it in overnight if you have a gunked up atty.
Atty will then taste and draw better.

Try this stuff, relatively cheap, works well, what more can I say except alot better than fooling around w/mouthwash, alcohol or coke. Plus you can use this stuff on the go.

Another winner from Want2Vape

 

[Caddyman]

i saw this on their site when i placed a order yesterday, almost added to cart. maybe i will next time, thanks for the review!

 

[AlmightyGod]

I've heard this stuff is fantastic...gonna get some on my next order.

 

[jeannest]

I'm ordering some right now. I have some attys that I can't get a few flavors out of. Maybe this will save them.

 

[Liv2Ski]

Stronger flavors will need the method dspin descibed. The stuff works pretty well. I got a bottle this week.

 

[lasttango]

It really does work well... I would just suggest not overfilling your atty. Better to do the 3 drops a few times than adding 7-10 drops at one time... I ruined an atty getting a little too happy with it - it's not like dropping your atty in alcohol... so don't drown it.

 

[doots]

Works great.. try it..

 

[DFreshmaker]

not to thread hijack, but I wasn't sure how to use it. I e-mailed w2v and here was the reply...

"Hi Doug,
Great stuff, We use it ALL the time.

Short version:
Run it through your atty between flavors. Blow out. Use atty, no rinsing required.
and/or
Soak overnight to rejuvenate a atty.

LONG version:
What we made it for was for all the folks that are buying our samplers.
We got some nasty feed back for awhile. But with further inquiry found out they were trying the flavors one after another.
Some flavors don’t mix well at all and make for a real dirty / bitter combo. Think of using all the crayons in a box on one piece of paper. Pretty soon it becomes black.

Had one fellow vape menthol after vaping caramel 2. Yuck.

So this had been in development for over a year looking for just the right combo of ingredients.

We wanted it to work first off by flushing out any flavors before a new one was being tested. We also (cause we were poor) needed our atties to last longer and 3rd it had to be safe. I mean there are lots of things you could use that may work faster at flushing but we didn’t want to put it in our bodies.

Then with further testing we found that we also wanted to not have to wait for our atties to dry overnight.
We found that if you take your atty off the battery,
Hold it over the sink and fill it up (no cart, threads down)
Let it drain naturally,
Give it a little blow to well, blow, the remaining bit out.
Put everything back together.
Take a couple dry hits (no inhaling but lots of vapor) (there is a small percentage of PGA (Pure Grain Alcohol) some folks like to inhale but we ask that you don’t.

Then refill your cart add a couple drops of the new flavor of juice to the atty wick and your good to go.
Now there is another benefit to this formula,


If you put the little silicon condom that your atty came with (if it did) on the metal threads, sit the atty on the sink in case it leaks a bit.
Fill the atty to the top with the refresher and let sit overnight.
The next day look inside and you will see swirls of brown.
It has soaked into all the wicking and metal foam they put inside a atty to hold it together and wick the liquid out of the cart. and pulled all the nasty's out into the refresher..
Pull the condom off, let drain, refill drain again, If it was real dark or you hadn't ever washed the atty out before, do it again (the fill and drain part)
Do as I said above, take a couple dry hits and put it all back together.

We find (we use tank atties and SLB 510’s around here) that a atty will eventually just get slow but never die.
Kinda like me, lol.

Hope all that helps.
Did it make sense?

May want to post this somewhere (like the site) or on the forums for others.
Not sure I’m allowed being a vendor and all."

 

[dspin]

Thanks for the posting DF, great info

 

[loden813]

I will have to order this...usually go thru several flavors during the day.

 

[ditc]

this may be a dumb question, but any idea if i can use this stuff to refresh/clean a krd808-1 cartomizer?

 

[thecollector]

Yeah I just got it in my order as a sample, cool people with good product. The atty refresher works great, I was sceptical for sure but it took away some of the nasty last flavor I had so good for you guys to come out with this.

 

[dspin]

I don't use those, but shoot him an e-mail

this may be a dumb question, but any idea if i can use this stuff to refresh/clean a krd808-1 cartomizer?

 

[vapi]

this may be a dumb question, but any idea if i can use this stuff to refresh/clean a krd808-1 cartomizer?

I got a free sample with my order and I tried it and it didn't work for me. The cartomizer still smelled like the old juice.

 

[thecollector]

This is not for cartomizers since it has grain alcohol in it. Unless you don't mind vape'n grain alcohol out of filler.

 

[SaturnineDenial]

How does the Atty Refresher compare to vaping straight vg/pg to get a flavor out of an atty? I'm considering this purchase because the refresher seems to help with daily care, whereas the straight pg and vg seem to only get rid of the flavor.

 

[hollyberry]

Recently received some of this and I just have to say that it's awesome! I've been using it when switching flavors to get the old flavor out of my atty and it works wonderfully. I'm going to be placing an order with them soon, and this will definitely be in my order. Great stuff!

Saturnine, IMO, this works better than vaping straight pg/vg (plus it's a lot faster!).

 

[ukeman]

I have been using VB Arctic Ice as my "cleaner" as well as a great vape... it's described as a "neutral menthol" .. i guess because it's not a minty menthol... great by itself, but works for transitioning a new flavor in the same atty... when you drip on to the atty the previous vape turns into a "cooler"... then i vape a few loads of AI, then start with a different flavor...

But, hey, I am all down to order this when i get around to trying out my buddy Dspin's recommends for a good juice vendor.

I wonder if or how it compares to doing the "atty cleaning method"/s we see posted here.?

 

[ukeman]

btw, just wanted to mention that i feel the darker vapes, like coffee dessert vapes are most likely to burn/clog the attys.... anyone else?

 

[typocinnamongrl]

Coffee flavors are a nightmare as far as getting that burnt taste for me. I've pretty much given up on them. Darker juice in general seems to have that problem.. though snickerdoodle doesnt seem to do that for me and its fairly dark. About the atty refesher. Seriously? I've tried it, and yeah, it works just fine, and it is convienient, but you can do this at home with water and it works just as well IMHO. You could even mix PGA and water and you have essentially the same thing, except 1/100th of the cost. Given I dont know what the exact right ratio would be. For me its not worth the money.