The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

What atomizer produces the best taste and most vapor?

Discussion in 'New Members Forum' started by malazan82, Sep 18, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. malazan82

    malazan82 Senior Member

    Would love to hear some of your guys' opinions on this one. I've only tried 5 different types of atomizers, so far the best is the eCa on the eVic, but sometimes it seems to get a plastic taste from the liquid tank.


  2. Cr0tchF4i

    Cr0tchF4i Senior Member Verified Member ECF Veteran

    Jul 25, 2013
    San Diego, CA
    RDA's on a Mech. (Rebuildable Dripping Atomizers) on a Mechanical Mod.
  3. irieSTYLEE

    irieSTYLEE Full Member

    Jul 11, 2013
    So Cal/Atlanta
    of course any vapor would recommend an RDA on a mech mod. if you arent ready for a mech mod, i suggest a VV, VW device. my fav for the price was the itaste MVP; it has a huge battery, can recharge your devices, and has a puff counter. i would recommend the provari, but ive yet to buy one cuz of the price. if you feel ready for a mech mod, buy a cheap fasttech mod; it takes for ever to deliver but its worth the wait in price. they have chi you clone mods that are 1/8-1/4 of the price and work damn near the same (i succumbed to paying $400 when they first came out, and the clone was near the same).
  4. sawtoothscream

    sawtoothscream Ultra Member Verified Member ECF Veteran

    Apr 26, 2013
    United States

    love teh flavor I get from the chimbus at .4 ohms on the mech. awesome
  5. Krazirob

    Krazirob Super Member Verified Member ECF Veteran

    Sep 12, 2010
    Cameron, NC
    the AGA-T is pretty good to me on my Vamo......I use mesh for my wick
  6. Ryedan

    Ryedan ECF Guru Verified Member ECF Veteran

    Mar 31, 2012
    Ontario, Canada
    I don't know the eCa. You asked about atomizers, but if it has a tank is it really a clearomozer you are refering to? A link to it would be good. What others have you tried?
  7. vapo jam

    vapo jam Super Member ECF Veteran

    May 25, 2013
    county of orange, ca
    everybody always says rebuildables, but if you want something more plug-and-play, check out an hh357 from avid vapor. as far as pre-built drip atty's go, it's the best.
  8. JMarca

    JMarca E-Cig Afficionado Verified Member ECF Veteran

    Mar 19, 2013
    New York
    ^ This, while I agree that an RDA is best for an experienced user, you can't just tell everyone to go build their own coils and expect the same results. Dripping attys do the samething as an RDA only it's been professionally built and for someone new to dripping to try.
  9. malazan82

    malazan82 Senior Member

    Here is a link to the eCa, they have a type A and type B, only difference is the look: Joyetech eVic Changeable Atomizer ( ECA Kit Type A ) -

    Also, I bought an RBA, not an RDA, the smoktech RSST, bought 400 SS mesh and 32 gauge kanthar wire. My first set up worked well, but the airhole is too small and in PBusardo's youtube review of it he recommended drilling the airhole out to the size of the AGA T, but didn't mention how many millimeters that is. I also bought a torch to oxidize the mesh and watched a few videos on how to properly oxidize the mesh. After my first set up, it worked well, but after a few hours of vaping it got a burnt taste. A person at an E-Cig store recommended I replace the wick. I did so, as well as the wire, but it seemed there were hot spots, and for the life of me I couldn't get it to glow uniformally. I'm very new to RBAs and I've never worked with this sort of stuff so I didn't expect it to work perfectly, but I'm kinda bummed that I can't get it to work properly.

    Anyway, what would you guys suggest is the best RDA and mech mod set up? I'm not even sure what a mech mod means lol. And, $400 for one? Wow, they must be pretty cool. The most expensive mod I've seen is the innokin iTaste 134. Really cool look but lots of other limitations. I've seen it priced from $140 to $170.

    do you have a set up you could show me Cr0tchF4i ?

    I think I am doing something wrong when oxidizing the wick. Or maybe 60%PG and 40%VG isn't right for an RBA? I have so many questions when it comes to vaping lol.

    Thanks guys

  10. JMarca

    JMarca E-Cig Afficionado Verified Member ECF Veteran

    Mar 19, 2013
    New York
    SS mesh changes to the flavor of the juice all together, for an absolute clean juice cotton or nothing. That's just my opinion but ask the hundreds of builders making micro coils wrapped in cotton. If you want a clean juice without anything getting in between the flavor then I wouldn't recommend any tank with a replaceable anything. Try the dripping route if you like it do some research and try an RDA.
  11. malazan82

    malazan82 Senior Member

  12. sawtoothscream

    sawtoothscream Ultra Member Verified Member ECF Veteran

    Apr 26, 2013
    United States
    I doont like SS mesh, have tried using it several times and fallowed lots of vids and it always taste bad to me. Peaches and cream 100% cotton taste awesome
  13. malazan82

    malazan82 Senior Member

    Yea the eCa really seems to prevent the full flavor from coming out. And I think it is because of the plastic.

  14. vapo jam

    vapo jam Super Member ECF Veteran

    May 25, 2013
    county of orange, ca

    no problem -

    first option:
    you want 510; this is what will fit on your evic. standard or long barrel is just the length of the atty - i think long is about the length of a cartomizer, and standard is about half that length. the long barrel will have a cooler vape than the standard barrel due to the increased length.

    second option:
    color, obviously personal preference.

    third option:
    i like the 2-2.5 ohm resistance - for me, these are the most versatile on a vv/vw mod. higher resistance (3 ohm) basically has the same effect as turning down the voltage, and vice versa for lower resistance.

    fourth option:
    drip atty's are typically primed with pg/vg from the factory to keep them moist (which i believe keeps them from getting damaged, but not sure). for the best results, i think you're supposed to get the atty primed with a similar blend to what you tend to use most, so if you like mostly pg-heavy liquids, get it primed with pg.

    all that being said, i'd recommend one of the non-custom hh357's:

    HH.357 Cisco Spec Hybrid 510 Atomizer - Avid Vaper

    HH.357 Long Barrel Hybrid 510 Atomizer - Avid Vaper

    they're almost exactly the same (depending on the options you select, they could be exactly the same), but they're $3 cheaper and usually are delivered much faster.
  15. malazan82

    malazan82 Senior Member

    Awesome thanks man :)

    Sent from my SPH-L900 using Xparent Cyan Tapatalk 2
  16. 4mudski

    4mudski Super Member Verified Member ECF Veteran

    Feb 28, 2012
    I fond that my versa mod, by Bart Buttermore and a era atomizer at .89ohm's is kicking some ...!!
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice