Hi judy, after you dry burn, try putting them back in the pot of hot water or just rinse in hot water and let dry. Or, you could try cleaning in vodka, vineger or pga and then rinse in water and let dry.
- Status
Hi judy, after you dry burn, try putting them back in the pot of hot water or just rinse in hot water and let dry. Or, you could try cleaning in vodka, vineger or pga and then rinse in water and let dry.
Still have not burnt out either of the 2 long wick heads .....so a month. The T2 is starting to get some abuse though. Im taking it to work and knocked the tip off....and almost lost it ....and thought it might be ruined, but it went back together easily and is still working good. Still got to make it thru a couple wks of abuse. Always have back-ups. I take 4 or 5 with me.
Im still experimenting, but im starting with preboiled cotton embrodery floss.
Yesterday I went to my local shop and broke down and bought another T2 after all of the trouble I had with them. Well this one had the head that did not have the little cup and so far it is fantastic. I must have had a bad batch when I first got them. I think I will try another one.
Is it the version with the long wicks? It's the only type of head I've ever used and never had a problem on the 4 that I've tried.
Just an update, like the T2 so much that i ordered from Stormy's on 10-6 and Vapingme on 10-18.
First, all are long wick now and none come with the "flavor wick."
comparing my first T2 from sept., with Stormy's, other than the cup and short wick, i can't see anything that would lead me to believe that someone other than Kanger made it. I looked closely, under magnification. But i did see some different things with the most recent ones from Electronic Cigarettes, Vaping Supplies, and Tasty Juice - Vaping Me
The Kanger t2 now has a removeable cap over the tip. I also see that the top metal ring is longer.
The packageing of the replacement heads have been different with all three orders.
I'm still using the original "tank" from sept. 1, but don't know how much longer it has after the abuse it has seen lately....tip knocked off twice and crack starting to form at the bottom.
First, all are long wick now and none come with the "flavor wick."
comparing my first T2 from sept., with Stormy's, other than the cup and short wick, i can't see anything that would lead me to believe that someone other than Kanger made it. I looked closely, under magnification. But i did see some different things with the most recent ones from Electronic Cigarettes, Vaping Supplies, and Tasty Juice - Vaping Me
The Kanger t2 now has a removeable cap over the tip. I also see that the top metal ring is longer.
The packageing of the replacement heads have been different with all three orders.
I'm still using the original "tank" from sept. 1, but don't know how much longer it has after the abuse it has seen lately....tip knocked off twice and crack starting to form at the bottom.
Mine are also going strong, I think I found a way to bypass the flooding. Although I love bottom coils much better, I'll keep the T2 as a standby vape on the go. I'll stop fiddling with the T3 and go to the CE3 XL, the replacement carts cost the same. And vapes MUCH better.
[
ATTACH=CONFIG]152874[/ATTACH]
These are from 3 different orders ive made......i like.
The one on the left is a short wick with cup from vapingme....my first order and im still using the other from that order.
The one in the middle has long wicks that i got from Stormy's next.
The one on the right, from Vapingme, was my last order and has a broader band of metal on the top ring. Plus a cap on the tip.
ATTACH=CONFIG]152874[/ATTACH]
These are from 3 different orders ive made......i like.
The one on the left is a short wick with cup from vapingme....my first order and im still using the other from that order.
The one in the middle has long wicks that i got from Stormy's next.
The one on the right, from Vapingme, was my last order and has a broader band of metal on the top ring. Plus a cap on the tip.
Attachments
Like this? Happened to my supplier's tester... Glue it together, works great! I had to glue the thread to the tip with superglue... Works beautifully!
What about the third one? Do regular heads fit better? I think the long(er) wicks were a great improvement! And so far, I think are the best performing clearo heads.
I still have not tried the long wick coils yet on the T2's. I bought a 5 pack of the T2's that came with the longer wicks, but I want to use up my supply of short wicks first. How much of a difference are they?
Love my T2's and i still keep a couple around as spares, but when i left the eGo, i had to switch to the Vivi Nova. Needed something 510 threaded as I have too many issues with my lavatube and the 510-ego adapters.
No, my metal ring up top stayed on the plastic houseing and the "threads" stayed there also. Just the plastic tip came loose and it was easy to push back in place.
Hi ricks,
I used my original short wick with cup from sept. 1 to 18, then i took it apart just for fun. I liked it, but ive been using the long wick replacement heads since and i dont think? there is much difference.
Hi Susaz, i dont understand your ?
My first was the short wick and i really liked it but have been using long wick heads since Sept. 18, so my memory.
I mean that if in the third one regular heads fit ok or are they different?
Everything works Susaz, i even double checked for you. All the threading remains the same and the heads are the same.
If the "adapter" doesn't work, this is the best choice for lack of contact. Its very easy and safe on some devices, but, BE VERY GENTLE on the Kanger T2, the positive wire is soldered to the post on mine.
I had to retire the original one that ive been vaping since Sept. 1st, the crack that started from my abuse is now starting to leak.
- Status
Similar threads
