What "O" ring do you need to put on the precises plus 18650 for the kick to work

[Steamtrain]

Hey there everybody i just have recieved my P+ 18650 with kick, I just want to know what "O" ring do i need to put on the bottom were the Battery sits for my 18490 AW IMR batt to make proper conection with the kick???? i have the thick O ring and the thin one.
i think by having the thin one at the bottom it is not thick enough to make proper conection with the kick. Anyone with this setup please help or if anyone knows please feel free to reply, it would be much appricated. So its a P+ 18650 and i have 18490 AW IMR batts and a kick. I Also have 2 washers on the switch.

cheers

 

[Covert]

Don't quote me, but I helped a friend and we ended up using one washer and the thin oring ,but we also used a 18500 Efest and it left a 1 to 2mm gap on the top, but fired like a champ.

 

[Steamtrain]

Don't quote me, but I helped a friend and we ended up using one washer and the thin oring ,but we also used a 18500 Efest and it left a 1 to 2mm gap on the top, but fired like a champ.

Thanks Covert, i just put in the thick O ring on the bottom and im using 2 washers i guess coz im using AW IMR 18490 batts the thick O ring seems to work and make contact with the kick, its hitting well for the time being.... 9watts on the kick 2.0ohm Boge tanked in a Liquinator. Anwayz anyone else who is using 18490 AW IMR batts with the 18650 P+ and kick? and are you using just the thick O ring?

Cheers

 

[LOPCG]

You may have already figured this out, but I just tried my kick last week. I put both the thick & thin O rings in the bottom & 3 washers on the switch. It still seemed to rattle around a bit. Just a caution so you do not make the mistske that I did--If you remove the kick to put in your 18650 batt do not forget to also remove the extra O ring & washers. I forgot the washers & almost burned up my battery. Luckily I caught it within 5 min. or so, everything was very hot. I burned my wick in my new Vision Eternity & had to replace the wick, but at least I learned how to do that.