What voltage or wattage should I use

[NicholasJames]

I have an aerotank with dualwick 2.0 wick that came with it what are your best settings for my vv vw battery

Sent from my XT1056 using Tapatalk

 

[Chago]

If you dig around a bit here you will find a chart that lists the voltage/wattage ranges for a given atty's resistance. But a good rule of thumb is.. Volts: add 1.8-2 to your resistance for a starting point (2.0 Ohms, add 2. Watts: start between 7-8 watts as a starting point. With both methods, adjust to taste.. Up or down in small increments.

I prefer variable wattage. I set mine at 8.5 watts and let the chip handle adjusting the voltage for which ever atty i'm using at the time. Set it and forget it!! Ronco-style!

 

[*deleon517*]

best is a matter of preferance, what you will want to do is start out at the lowest setting. then take a couple puffs, go up to the next setting take a couple more puffs and repeat until you find what you like the best. My wife likes 6-7 watts, I like 20-25 watts so there is no one size fits all.

 

[dripdaze]

^^^^^^^^ Whatever tastes best to you.

 

[pman3255]

I used to ask this question, but there are too many factors.

The juice, the batteries, etc it all pans out to what suits you. Try a lower setting around 7-7.5 then go up little by little til you know it's right,

 

[zanedog]

Crank it as high as it will go!

 

[Butters80]

http://25.media.tumblr.com/tumblr_m9dkanCt0I1qc8949o2_1280.png

If you stay in the light green, you're usually good to go.