Title says it all. I'm looking for a rebuildable tank that can be used while at work or out and about. I have a protank, nautilus and several evods. While they work I'm not satisfied with the performance. I have a couple of RDAs that are great at home but not designed for out of the house use. The kayfuns sound like what I want but I'm confused by all the different versions.
What's the difference in all the Kayfuns?
- Thread starter kfelder
- Start date
- th_trl_thread_readers 0
- Status
By all do you mean the clone brands or just the variations in the original lite vs the lite plus?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sorry I guess I should have been more specific. The different variations. KF 3.1, kf lite, kf lite plus, kf mini and so on. Not the clone brands.
I have pretty much all versions of the kayfun except for the new Black kayfun lite with the upgraded air hole adj, etc and the 28mm version. If i were to buy one now I'd get either KAYFUN REPLICA BLACK EDITION - VERSION 3 but I probably would not buy a Kayfun I'd get a Fogger V4 or an Aqua. Easier to set up dual coil no flooding on them. I have those too along with the kayfuns.
The original KF is a larger RBA never had one so cant speak to it. The KFL V1 has no airflow control I have 2 and really love them. The KFL+ has airflow control I have one and I love it slightly more than my KFL V1 the KFL + V2 has slightly different top cap and slightly better AFC I have 2 and they are the best I have. I do not have a mini but it is thinner and longer. Finally not sure if I would classify as a clone but the Russian 91% is pretty nice as well it does feature AFC and has an adjustable bottom pin. I have 2 and have sold 2 due to inconsistent shorting which I think was my fault but did not want to play with them to much so I sold and replaced with KFL+ v2. There are also drop kits to shorten the entire length called Nano kits as well as aftermarket top caps and Quartz and poly tanks to replace the original
Thanks for the reply that helps a lot. Are any of the different versions easier to refill than others? Are they top fill or bottom fill? Do you have to drain the tank to change wicks or coils? If so how easy is it to drain?
They all fill the same from the bottom there is a screw hole. you have to drain the tank to change the wick and coil. I use a blunt syringe and just drain use it to drain the tank then use it to re fill. You lose a little bit of juice that is on your old wick tough. I change most of my wicks once a week and can do each one with a new coil in about 5 minutes 7 if I really pull them all apart and clean them.
Somewhere in there they also added o ring to the fill screw and the kfl+ v2 drip tip looks better imo. also some of the originals didn't have standard 510 drip tip iirc? it screwed in or something? not sure on that
I think in one of the versions they also milled out the top cap a little more. But other then difference in version with fill screw, top cap, o-ring in the top cap recessed, air flow control... when it comes down to who makes it... quality. The original is high quality. From there I feel Ehpro and Hcigar make quality clones. The original also didn't use standard 510 drip tips. Personally I love the original, but the Ehpro KFL v2 is a very nice clone and I have happy with those as well.
The 3.1 has a side fill hole that requires a needle point dripper or syringe. You can top fill them but its a little trickier in that you have to cover the airhole.
I have a Kayfun lite plus clone, which preforms very nicely. I want to purchase the new V2 (version two) clone from fasttech and focalecig. new drip tip, improved top cap, includes the nano kit and has outstanding reviews. It looks like it's made by Infinite. I can't afford the authentic ones.
Last edited:
The expromiser is an "original" that is basically a kayfun that you can take the top off to refill or rebuild whenever you want. It has adjustable airflow. I have a kayfun clone and the expromiser and would get the expromiser just for the ability to take the top off whenever I want.
Yup sorry for that you are right I have never had the full sized good catch though. Also the oring on the fill screw was added with the KFL+ and improved a little on the KLF + V2
I've been looking at the clones on fasttech but not sure which is the best one to get. Kind of want a black one to put on my Panzer Blackhawk sikastits clone.
- Status
Similar threads
- Locked
