Whats the next step?

[Ohm Gnome]

I'd suggest getting a pair of tweezers with ceramic coating. You can squeeze coils tighter with them even when you're pulsing the coil. Regular tweezers are just metal so they conduct electricity. The ceramic ones can be found in some hardware, and craft stores like Michael's

 

[Msand]

I would suggest reading up on battery safety, and make sure your batteries are rated for the ohms you are building to. You never mentioned which batteries you purchased.

 

[Lonely vaper]

I would suggest reading up on battery safety, and make sure your batteries are rated for the ohms you are building to. You never mentioned which batteries you purchased.

All i know about the batteries is that theyre blue and made by samsung. I believe theyre pretty common.

 

[hashtag]

Start playing with different wraps and coiling but keep it around .5 until you get comfortable with the different builds. You will learn a lot more that way and by the time you learn a few different builds you will better understand everything and be more prepared to drop into the more dangerous sub ohm levels.

 

[hashtag]

All i know about the batteries is that theyre blue and made by samsung. I believe theyre pretty common.

Learn what will make those particular batteries blow up (not through experience). That is really the key to the whole sub ohm and cloud chasing thing.

 

[NealBJr]

Just bought a sigelei 100w with a mutation x recently. Im ready for more so whats the next step?

THey say chuck more clouds.. I say... mix your own juice. Make high VG blends.

After that, open up your own vapor shop... If you're a lonely vapor, see if you can help other lonely vapors in your area.

 

[NealBJr]

I'd suggest getting a pair of tweezers with ceramic coating. You can squeeze coils tighter with them even when you're pulsing the coil. Regular tweezers are just metal so they conduct electricity. The ceramic ones can be found in some hardware, and craft stores like Michael's

Ceramic tweezers are a must have for me. They stay in my rebuild box.

 

[Panorama911]

I would start reading all about coil design and building, then reading on what power it takes to make your builds work.

 

[GrandSam]

That's an easy question. Head over to Amazon, get a large pack (140 CT) of Japanese cotton, wire of your choice (assuming you don't have it) and a ton of DIY supplies to make your own juice.

 

[Msand]

All i know about the batteries is that theyre blue and made by samsung. I believe theyre pretty common.

sorry, but that is not at all encouraging. I would suggest taking some time to read Baditude's blog posts. here are a couple of links:

(7) Information Resources for Your First RBA | E-Cigarette Forum

https://www.e-cigarette-forum.com/forum/blogs/baditude.88498/


(9) Battery Basics for Mods: IMR or Protected ICR? | E-Cigarette Forum

 

[Msand]

here is another important link:

(14) Ohm's Law for Dummies (Vapers) | E-Cigarette Forum

sorry to mother hen, but you need to know what you are getting into before you lose a finger. It will also help you understand what all factors you need to take in account to build coils. it all comes down to coil, wicking, and air flow. if one is off. You will have a coil that is under performing.

 

[Lonely vaper]

Thanks for the advice guys! Greatly appreciated!