Whats your fave coil & ohms you vape at? (Mech Mod)

[Darkangel]

Using that. Sony VTC4. After continuous vaping for half an hour, battery ain't even warm.

Highly recommend that or grab the newer VTC 5. 2600mAh

Not only it is not warm, the capacity is high and last a long time. With such battery and using sub ohm is like vaping using a dna mod. Continuous favour and vapor

 

[hellsing-girl]

AW 18650 (2000mAh), 28AWG, 0.5 ohms dual coil with cotton.

 

[Darkangel]

AW 18650 (2000mAh), 28AWG, 0.5 ohms dual coil with cotton.

This battery is good too! I have four but could not compare to Sony VTC4. the vape quality is much better and the firing is continuously constant for a longer period than AW1850 (2000mAh)

 

[hellsing-girl]

Yeah. I made a mistake, should have bought the 1600mAh because that one has a 24 amp draw compared to the 2000 which has only 10 amps. I wanted to get my hands on some Sony 30 amps but I can't seem to find them.. So I'm just waiting on the new Xstar ones that will come someday.. Somewhere.

 

[Sed Contra]

Currently my best sub-Ohm build is dual 8 wrap 26 gauge micro coils weighing in at .38 Ohms...it's running HOT, but I'm used to 1.4 Ohms on a Provari.

I'm finally appreciating the air flow control drip tip from Ninja Mods to help cool off the vape, too.

With 100% VG DIY liquid, it's chucking the vapor!

Sony VTC4...Nemesis & Trident clones

 

[hellsing-girl]

Currently my best sub-Ohm build is dual 8 wrap 26 gauge micro coils weighing in at .38 Ohms...it's running HOT, but I'm used to 1.4 Ohms on a Provari.

I'm finally appreciating the air flow control drip tip from Ninja Mods to help cool off the vape, too.

With 100% VG DIY liquid, it's chucking the vapor!

Sony VTC4...Nemesis & Trident clones

My trident clone won't fit on the nemesis not enough threading on the 510 pin, ugh.

 

[Sed Contra]

My trident clone won't fit on the nemesis not enough threading on the 510 pin, ugh.

That sucks. The only problem that I had was fitting 26 gauge wire in the slots...it's a tight fit on the clone that I have.

 

[hammerdin]

5 coils, 26 awg, 0.5ohms, dual coils, on astro, 16350 battery 800MaH

can last me half day and the vap is hot and cloudy!!

my IGO RDA tank on atomo doesn't work on the 26awg and 30awg currently..... getting 2ohms and 0.5ohms respectively.... little vapour and the juice all comes into my mouth, making me feel like I am eating sweets.... sian!

waiting for my 28AWG to come in and try....

 

[lucryj]

Vaping on my kayfun at 1ohm on a private v2, atomic rda at 0.5 dual coiled on a atb vv at 5.5v

 

[desmondsg]

This battery is good too! I have four but could not compare to Sony VTC4. the vape quality is much better and the firing is continuously constant for a longer period than AW1850 (2000mAh)

I have 4 AW 18650 too and i am controlling myself everyday not to order the Sony VTC4 or VTC5.

 

[menkey]

Just discovered chimney coil for my kayfun at around 1.4 ohms and its so much better than single coil. Vapor is not too warm and the taste is superb!

 

[Darkangel]

I have 4 AW 18650 too and i am controlling myself everyday not to order the Sony VTC4 or VTC5.

You should get VTC batteries, very good for sub ohm and if you are not on sub ohm the battery last longer and consistency in vape is much better and longer than AW

Whereas AW, is good but doesn't last that long when on sub ohm; consistency drop in vape quality. But I had also tried AW 18650 1600 mAh instead of 2000mAh seems the 1600 mAh has better vape than 2000mAh

 

[Darkangel]

Just discovered chimney coil for my kayfun at around 1.4 ohms and its so much better than single coil. Vapor is not too warm and the taste is superb!

Congratulation! I am to lazy to change my usual 6/7 single coil on KFL

 

[hellsing-girl]

This should help.

 

[Darkangel]

This should help.

Thanks! Seems we are right about Sony VTC4, lowest ohm 0.2 but I have never hit 0.2ohm, I ever coil on Agi tank is based on 0.5ohm but felt lower ohm not to my liking, so stay around 0.8ohm ~ 1 ohm. Unless one day got my hands on DNA mod

 

[Neok]

This should help.

power la....

 

[Darkangel]

Bro, the current and ratings?

I presume its 3.7v as well.

I like to find out as my batt drains too fast as well

I am using AW 18650 2000mAh
AW18650 1600mAh
Sony VTC4 2900mAh

So far VTC4 last longer and better vape quality.

 

[desmondsg]

You should get VTC batteries, very good for sub ohm and if you are not on sub ohm the battery last longer and consistency in vape is much better and longer than AW

Whereas AW, is good but doesn't last that long when on sub ohm; consistency drop in vape quality. But I had also tried AW 18650 1600 mAh instead of 2000mAh seems the 1600 mAh has better vape than 2000mAh

1600mAh is 24A output whereas the 2000mAh is 10A output only. I restraining myself to buy the VTCs because if i buy them then my AW IMRs will be stored away in the drawer forever for sure.

 

[hellsing-girl]

Just ordered two Sony VTC5s. Can't quite wait to try nano dragon coils on those!

 

[menkey]

1600mAh is 24A output whereas the 2000mAh is 10A output only. I restraining myself to buy the VTCs because if i buy them then my AW IMRs will be stored away in the drawer forever for sure.

you could use them for flashlights