What's your favorite RBA (rta or RDA)?

[HecticEnergy]

personally I have the
kayfun light plus clone (rta)

rdas (in order, favorite first)
Big Block clone
trident v1 clone
tobh clone
CLT

im looking to add a Plumveil clone and veritas to the mix!

I usually do micro coils built at 1.4 (0.7 in parallel) with 28 ga kanthal, around 5/64 drill bit or equivalent. I've tried other coils (32 ga braided, 32 ga parallel wrap, 24 ga macro, etc) but most of the time it seems like more work than its worth.
ive also built down to .3 resistance, but again, didn't really improve the vape for me.

what about you? What have you tried? What's your favorite?

Edit: I've been wicking with organic cotton, but have some Japanese organic cotton on order... Should be here in 3 weeks... LOL

 

[Bob Anderson]

I'm new to rebuildables. I have a Kayfun/Russian 91% clone. I use 30 gauge kenthal and cotton wicks, single coil anywhere from 1.8-2.6 resistance. So far so good! I am NEVER going back to pre-manufactured cartos. lol.

 

[XBarbarian]

I have a R91 ( authentic ) and a tobh, atm. I also still use my Nautilus, as they have improved so much with the BVC coils.. although flavor isnt quite up to par with rebuildables. I believe the Elf Queen ( Erlkonigin ) is my next RTA. Not cheap... but.. quality isn't cheap anyway.

I like both, but Im partial to tanks for portability. Ill probably add a KFL+ clone or two to the mix. Like to have multiple flavors at my disposal.. I get flavor fatigue pretty fast. by changing it up regularly, I get to enjoy many flavors.

 

[Ronald3638]

Kayfun is my favorite RTA and the Smok Dripper RDA would be my favorite dripper, but then I'm a flavor junkie not cloud chaser.

 

[HecticEnergy]

Kayfun is my favorite RTA and the Smok Dripper RDA would be my favorite dripper, but then I'm a flavor junkie not cloud chaser.

Which smok dripper?
I had a squid... It gave off great flavor, but it was a pos in the build quality department. The positive pin kept moving up forcing me to hammer it back down.... Jacked up the pin on my SID that way....


Sent from my iPad using Tapatalk HD

 

[MrPlink]

Im a flavor guy so -

Magma
Magma
And
Magma!

If I am going to be driving for a long time or just need something that is "brainless" then the Kayfun is my go to.

For looks alone I think the Kraken is damn sexy, but I am just not a genny guy

 

[bm2112]

Haven't found an RBA I like nearly enough to stop dripping. I have quite a few attys and my favorite is the Omega. It has large stock, adjustable airholes and looks great on my Stingray X. I'm also very fond of my Nimbus clone. The Magma is nice for the larger capacity but doesn't have enough airflow for me.

 

[Flt Simulation]

RDA is a dripper (no tank)

RBA is a rebuildable (with tank) such as a Kayfun Lite Plus

What's an RTA? ... same as an RBA?

 

[HecticEnergy]

RDA is a dripper (no tank)

RBA is a rebuildable (with tank) such as a Kayfun Lite Plus

What's an RTA? ... same as an RBA?

Rba- ReBuildable Atomizer
Rda- Rebuildable Dripping Atomizer
Rta- Rebuildable Tank Atomizer

Rdas and rtas are both rbas, but not all rbas are rtas.... As I see it anyway...

 

[Flt Simulation]

See, in my 'perfect world', you would have an RA (Rebuildable Atomizer)

Which would be either a:

1. RTA (Rebuildable Tank Atomizer)

2. RDA (Rebuildable Dripping Atomizer)

 

[Flt Simulation]

There should not even be an RBA .... Rebuildable is one word (ie: RA = Rebuildable Atomizer)

 

[Newportlocal]

Currently, it is my Svoemesto kayfun lite plus v2. I have and enjoy my magma. I just like tank styles better for hassle free daily vaping. I see an Erlkonigin in my near future.

 

[HecticEnergy]

There should not even be an RBA .... Rebuildable is one word (ie: RB = Rebuildable Atomizer)

I totally agree... But in our markey it is a common "acronym" (not really, but what else do you call it?... Maybe because it's Re-Buildable..?)
I also hate when all these devices are called "e-cigs"... But that's another thread... Lol

 

[Flt Simulation]

....... Maybe because it's Re-Buildable..?

If so, then a "Re-Buildable Dripping Atomizer" would be a RBDA


Oh well ... it's just one of those things that make no sense at all

 

[HecticEnergy]

If so, then a "Re-Buildable Dripping Atomizer" would be a RBDA


Oh well ... it's just one of those things that make so sense at all

=) I agree! Sound logic.

 

[jaxgator]

My Plume Veil is my go to around the house and although I do keep the Magma at its side I use the Plume Veil more.

For out and about its nothing but the Erlkonigin.

 

[Flt Simulation]

As far a favorite atomizers ...

I use a SvoëMesto Kayfun Lite-Plus most all the time, and a Kanger Aerotank Mini when I go out of the house (because it's skinny and light weight)


My Aerotank Mini:

 

[Nomoreash]

RTA.....Kayfun Lite+

RDA....Magma

Bottom Feeding Atty which I guess could also be called a dripper....A7 but probably will soon be Magma also as I've just had it converted to a BF but haven't tried it yet in that mode.

 

[HecticEnergy]

As far a favorite atomizers ...

I use a SvoëMesto Kayfun Lite-Plus most all the time, and a Kanger Aerotank Mini when I go out of the house (because it's skinny and light weight)


My Aerotank Mini:

On the go I usually grab my Hana clone with kayfun, unless dripping is a possibility, then it's 4nine with a dripper...



Sent from my iPad using Tapatalk HD

 

[Flt Simulation]

My Kayfun: