And a "Howdy" from the desert on the East side.
Welcome to the greatest forum on the web as far as helping you spend your money...but we're friendly about it.
Where my Washington state Vapers at?
- Thread starter TrveKvltKing
- Start date
- th_trl_thread_readers 0
-
- Tags
- ecigexpress halo mt baker volcano
- Status
And a "Howdy" from the desert on the East side.
Welcome to the greatest forum on the web as far as helping you spend your money...but we're friendly about it.
Hey ...... Welcome Kennewick ...Moses Lake here.
Don't see to many from this side of the mountain.
Glad to have more support
Hey ...... Welcome Kennewick ...Moses Lake here.
Don't see to many from this side of the mountain.
Glad to have more support
Same to you Slots! There are a few vape shops popping up in the Tricities two of em are pretty decent. The Fix cafe in Richland is making their own juice on site its not too shabby.
Probably obvious from my info but I work in Bremerton and live between there and Silverdale.
Hey everyone, Mount Vernon finally has a REAL!!!! Vape shop. One opened up a few weeks ago on Riverside, by the KFC. Called the Vape Shop. 
Any who, was looking for a wrench, so swung in. Guy was friendly, was demonstrating wrapping a micro coil, had the latest clones, and a good selection of beginner and intermediate gear also. Room to vape, do some builds, appeared fairly knowledgeable. Didn't have time to scope things our real well, was on my way to work, but told him I'd come back to vape and chat, on a day off.
Had my goto work mods on me, the SuperMax, and 2 Stingrays. Was vaping Max, and he stopped his sale to a customer, wanting to check it out. He asked to touch max, and upon doing so jokingly pretended to drop it, and say's ha ha, just kidding, I say, Ha Ha, almost killed you, um, kidding, Not!
Well Rose2 was on max, so he had almost 4 bills of mine in his hands. Some of the best of me bests.
Any who, looks promising, nice and clean, Oh, what I liked, he was upgrading an ego user with a mech, was demonstrating proper batt install, noticed it was a Sony VTC4. Also making sure the guy had a proper charger too. So Mt Vernon is now on the Vape Map!!!
Any who, was looking for a wrench, so swung in. Guy was friendly, was demonstrating wrapping a micro coil, had the latest clones, and a good selection of beginner and intermediate gear also. Room to vape, do some builds, appeared fairly knowledgeable. Didn't have time to scope things our real well, was on my way to work, but told him I'd come back to vape and chat, on a day off. Had my goto work mods on me, the SuperMax, and 2 Stingrays. Was vaping Max, and he stopped his sale to a customer, wanting to check it out. He asked to touch max, and upon doing so jokingly pretended to drop it, and say's ha ha, just kidding, I say, Ha Ha, almost killed you, um, kidding, Not!
Well Rose2 was on max, so he had almost 4 bills of mine in his hands. Some of the best of me bests. Any who, looks promising, nice and clean, Oh, what I liked, he was upgrading an ego user with a mech, was demonstrating proper batt install, noticed it was a Sony VTC4. Also making sure the guy had a proper charger too. So Mt Vernon is now on the Vape Map!!!
WOW, that's good to hear dice ... next trip over there.
We went to Spokane the other day, and any time I go where there's a vape shop, I have to stop and snoop.
They carried Halo, and with all the hype about their "Belgium Chocolate", I grabbed the tester, all set to start drooling, ...what a let down
I make better chocolate at home
Then, I found the Suicide Bunny testers ... at last, I get to try "Mother's Milk" ... glad I saved the $$$, .. sure glad I learned to DIY a long time ago
That is the 6th time I have had a chance to try a really sought after juice, and I sure can tell these guys don't DIY.
I've had two different shops taste the stuff I'm carrying around to suck on, and both of them asked me if I wanted to make e-juice for them to sell ...
That was a real complement, but the word "lawsuit" flashed through my mind, and I politely declined.
Thanks for the info on the new shop ... next time I visit the grandkids, I will check it out.
Welcome "kiler" ... you found a good thread for the locals.
Amen to DIY juice!!! Give me Captain Blacks Cinful Delight, or Mad Eye's Pumpkin Juice over any spendy oo la la select premade. Buying juice that some one else made makes as much sense to me as buying coils made by others. heck, pay under $4 for 50 ml of customized hypnotic mary. lol. Did note that am into my second quart of vg for the year, saw there was only 1/2 gallon left and almost panicked, will have to get an order in before Christmas.
Every now and then some venders send free bottle of juice that never get vaped.
Every now and then some venders send free bottle of juice that never get vaped.
Wow! A real vape shop here in Mount Vernon. I'll have to skip on over and check it out today! That will put these tobacco shops to shame.
Thanks for the tip Dice.
Thanks for the tip Dice.
Yep, stopped in today for a chat and a vape. Had some decent mech clones, the Cana clone, a good selection of juices, rba's, ego's, all the latest knager SS aero tanks, a very good wide selection of gear and juice. Called the Vapor Stop. Heck, they had the Telsa Mech, and was tempted to buy it, looked pretty sweet. Nice kid, and bringing in more goodies to check out next week.
Nice kid, and bringing in more goodies to check out next week.
Anoyone wanna meet up tomorrow? I have a half day. Seattle area, willing to travel a little bit.
Hey everyone, Mount Vernon finally has a REAL!!!! Vape shop. One opened up a few weeks ago on Riverside, by the KFC. Called the Vape Shop.
Had my goto work mods on me, the SuperMax, and 2 Stingrays. Was vaping Max, and he stopped his sale to a customer, wanting to check it out. He asked to touch max, and upon doing so jokingly pretended to drop it, and say's ha ha, just kidding, I say, Ha Ha, almost killed you, um, kidding, Not!
Any who, looks promising, nice and clean, Oh, what I liked, he was upgrading an ego user with a mech, was demonstrating proper batt install, noticed it was a Sony VTC4. Also making sure the guy had a proper charger too. So Mt Vernon is now on the Vape Map!!!
Go to hear, I might have to stop in on my way to the races one of these weekends!
Just thought I'd throw this out there.... If anyone is looking to try out some Rayon/Cellucotton and your in the Everett area at some point. I'd be willing to give out a big ziplock baggie of it for $2. That way you don't have to buy a big 3lb box of it like most people. Which would last most people like 5 life times!
BTW the flavor and wicking is amazing!
BTW the flavor and wicking is amazing!
I head out to Marysville on Monday for work. Could we work something out? I'd like to try. Tell me more about cellucotton.Just thought I'd throw this out there.... If anyone is looking to try out some Rayon/Cellucotton and your in the Everett area at some point. I'd be willing to give out a big ziplock baggie of it for $2. That way you don't have to buy a big 3lb box of it like most people. Which would last most people like 5 life times!
BTW the flavor and wicking is amazing!
Yeah, rayon vape pretty nice, there is a whole thread on it by my bud Jerimie Rayon Thread Rayon wicks on the same level as Ramie fiber does, Wicks better than cotton and Hemp fiber. It is fairly user friendly, and wicks exceptionally.
I like ramie better though, much more heat resistant the rayon. But then most don't vape at the watts I am used too
I like ramie better though, much more heat resistant the rayon. But then most don't vape at the watts I am used too
Oh, and for you Washingtonian's that love quality rba's, Have just added The Erlkonigin . Made in Austria. Must say, this is one fine rba, for those of you that collect High End rba tank system, yeah, check it out.
Yeah, been on a collect expansion binge lately. What between some innovative rba's and high amp regulated mods, plus damn Fasttech, well, what can I say, once an addict,..........hey, but least this one has led to a dang fine collection.
Think I finally caught up to my banner, back at the break even point from quitting smokes
Yeah, been on a collect expansion binge lately. What between some innovative rba's and high amp regulated mods, plus damn Fasttech, well, what can I say, once an addict,..........hey, but least this one has led to a dang fine collection.
Think I finally caught up to my banner, back at the break even point from quitting smokes
We could definitely work something out. Have you been to Sky Vapor? We could meet there, It's fairly close to I-5. As for Rayon I don't know a lot about it, I just know it works well!
Definitely check out the link Dice57 provided and Pbusardo talks about it in his wicking test video.Yeah, rayon vape pretty nice, there is a whole thread on it by my bud Jerimie Rayon Thread Rayon wicks on the same level as Ramie fiber does, Wicks better than cotton and Hemp fiber. It is fairly user friendly, and wicks exceptionally.
I like ramie better though, much more heat resistant the rayon. But then most don't vape at the watts I am used too
Thanks for the link!
Oh, and for you Washingtonian's that love quality rba's, Have just added The Erlkonigin . Made in Austria. Must say, this is one fine rba, for those of you that collect High End rba tank system, yeah, check it out.
Yeah, been on a collect expansion binge lately. What between some innovative rba's and high amp regulated mods, plus damn Fasttech, well, what can I say, once an addict,..........hey, but least this one has led to a dang fine collection.
Think I finally caught up to my banner, back at the break even point from quitting smokes
Yeah I watched Phil's video on the Erikoegin rba. Love the idea of it! I hope to win it in his giveaway! I'm unemployed right now and can't afford high:end stuff, so it's clones for now. :toast
- Status
Similar threads
- Locked
