Which eGo Atty is best for driping???

[popeye79]

I have the Jets XL set right now.

But I also have about 20 different flavor juices that I want to test with out haveing to clean my current attamizor between flavors. Plus I want to DIY juices, so I really need a more convienent way of testing flavors.

So.. whats the best option for me, to use a drip tip with, on my current XL Janty eGo tank System (Jet) battery?

Janty electronic cigarettes, e-liquids and carts - eGo atomizer
Dura eGo atty
Dura eGo Mega atty
Dura eGo Mega LR atty
eGo XL Cone atty
eGo XL Round atty

Many thanks to whoever can answer this!
​

 

[popeye79]

*bump*

 

[juicejunky]

Cisco 306 LR atty from Avidvaper.com is my favorite. It fits on the Ego batteries directly. You need a 306 drip tip. XL keeps 100% of hot juice out of mouth. They have an 1.8 now too which I haven't tried. I prefer the 1.5 over the 2.0, but I may buy a 1.8 for light fruity flavors next time I order.


Cisco LR306 1.5 ohm Atomizer + Drip Tip Special - Avid Vaper

 

[tearose50]

Generally, you can drip on any atty where you can look in and actually see the wire mesh...(or it is exposed)..most 3 part pvs do this. I don't think you can with all the ones you listed, but the first 3 look like they would work fine. It is easier with a drip tip as you don't have to remove the cartridge & put it back on.

I'm not confident about dripping on a tank atty---haven't seen much about that possibility but would not.

 

[popeye79]

I'm not confident about dripping on a tank atty---haven't seen much about that possibility but would not.

which is why I want to know what new atty to get.


I was hopeing to find out which "Janty" product listed in the first post, would be best.
But I didn't even think about other brand attys fitting on my battery...

What's the difference between LR1.5, 1.8, and 2.0? Fruity flavors are better with higher numbers?
And will 360, 510, 801, and 901 attys all fit on my battery? What makes one better than the other?

 

[JudgeVape]

Cisco 306 LR atty from Avidvaper.com is my favorite. It fits on the Ego batteries directly. You need a 306 drip tip. XL keeps 100% of hot juice out of mouth. They have an 1.8 now too which I haven't tried. I prefer the 1.5 over the 2.0, but I may buy a 1.8 for light fruity flavors next time I order.


Cisco LR306 1.5 ohm Atomizer + Drip Tip Special - Avid Vaper

This, although I have always preferred the 2.0 ohm over the 1.8s and I don't think I would care for the 1.5 at all. His XL drip tip for the 306 is indeed spectacular. Cisco also makes a very good LR 510 atomizer. I am rocking one of those on my 3.7V box mod right now.

 

[JudgeVape]

What's the difference between LR1.5, 1.8, and 2.0? Fruity flavors are better with higher numbers?
And will 360, 510, 801, and 901 attys all fit on my battery? What makes one better than the other?

Heat is the difference. Ohms are a measure of electrical resistance (the opposite of conductance). So, in effect, a lower ohm atomizer allows more electricity to the coil faster, causing it to heat up more on the same current. In the case of your eGo, that would be roughly 3.2-3.3 volts.

306 and 510 atomizers will natively fit a 510-threaded device. 801 and 901 atomizers fit their own threads but you can use either on a 510-threaded device if you have an adapter.

 

[Stosh]

For a drip tip use to test flavors, eGo XL ROUND BLACK ATOMIZER will work great.
Big tube - easy to drip, big coil - good vapor, a few drops of plain VG or PG between
flavors, just vape it off to clean it out.

 

[jazdale]

Juicejunky has it right. I just bought this and received it today.
Cisco LR306 1.5 ohm Atomizer + Drip Tip Special - Avid Vaper

I also have an ego-T and wanted to be able to drip a couple drops instead of filling a tank and a zillion puffs to clear the atty for the next flavor. This will work on your ego battery just fine.

I love my tank for the long distance drives I do every day.
I love the drip for a sampling of several juices at night when I'm home.
They will taste different.

 

[popeye79]

Thank you everyone for the insight, just a few more questions if you don't mind...

Whats the difference between a LR306 & LR510 atty? If they both fit, is one better than the other? What's the differnce?

And I get that 1.5, 1.8, and 2.0 are differnt heats (kinda, I think). But whats the difference in vaping? Someone said earlier that one is better for fruity flavors... is this true? I like fruity flavors, and nutty flavors, whats best for me and why?

Thanks again, you guys all RAWK!

EDIT- I just read in another thread, that on an eGo battery, 2.0 is safe and 1.5 might fry my battery. Is this still true if I have an XL? 900mAh.

 

[Stosh]

The difference in a 306 and 510 is simply the tube surrounding the bridge. A 510 has the bridge at the bottom of a steel tube, and the 306 the bridge is more exposed (drip tip needed) and easier to drip onto.

The resistances will make the atty run hotter or cooler, 2.0 is the lowest recommended for an e-go battery because of the MOSFET inside the battery. Very low resistance can overtax the electronics and ruin the battery, although many do use them. YMMV
The mah of the battery only determines how long a charge lasts (how many gals in the gas tank) not how much power the battery can deliver when you push the button (horsepower of the engine).

I vape different resistance atty / cartos at 3.2 (e-go), 3.7 and 5v (mods) but the output wattage is very similar, so the vape is similar. I like a higher resistance, lower wattage for my light fruit flavors, higher watts for tobacco, menthol flavors.
PM me if this is just more confusing than enlightning....

 

[Jules815]

I am still VERY new to all of this but I do have an ego-T and want to see if I understand this correctly
Are you saying that I can use a drip tip with the ego-T atomizer? If so, which one? I have used cartos since I started vaping and I am now realizing that I can't "sample" anything without filling a cartomizer. I got the ego-T last week and love it but I am still having that same "sampling" dilemma.

EDIT: I think I actually figured out (just now LOL) that I can use the "blank" mouthpiece that came with the ego-T as a drip tip...This is SO very cool...

Juicejunky has it right. I just bought this and received it today.
Cisco LR306 1.5 ohm Atomizer + Drip Tip Special - Avid Vaper

I also have an ego-T and wanted to be able to drip a couple drops instead of filling a tank and a zillion puffs to clear the atty for the next flavor. This will work on your ego battery just fine.

I love my tank for the long distance drives I do every day.
I love the drip for a sampling of several juices at night when I'm home.
They will taste different.