Why are cisco LR 306's so frekkin good?

[Liv2Ski]

Hellllllz to the nooooooo i've got one on my pass through and one on my omega and there is no way your getting either one of them LOL.

I'd drop a fool if they tried to gank one of my LR 306's. It's a whole new vaping experience. especially with the drip tip that comes with it. i'm amazed at no flooded and no e liquid in the mouth.

Damn i love that sound though liv. don't you? BSHHHHHHHHHHHHH

Dude the sound is half the damned fun!!! Sometimes I keep the button pressed after the draw just to amplify it. Not sure BSHHHHHHHHHH does it justice though. I think I should head over to Vaporflow and order another 5 since he will probably be out of stock the way we are talking them up. Sorrid I would spot you one if you where in NY I am hoarding 25 right now!!!!

 

[flagreekguy]

I love my Omega @6v but it's a bit on the large size to tote around so I decided to get an Icon as well to use when I'm out and about.

I think the AW IMR 14500's and the LR 306's are gonna be a perfect match like you say. I'll definitely post when everything gets here.

BSHHHHH..SNAP...BSHHHHHH...CRACKLE POP...BSHHHHHH....heaven!!!

haahahah exactly!!! that's the exactly sound you will hear man! and you will be in vaping heaven. I brought my omega to work with the LR 306 and my new nickname is Richard Prior lol.

 

[Liv2Ski]

Wait I just did the math I could order another ProVari with what I have stocked in Cisco LR 306's. Screw it they are worth it. Happy vapes guys

 

[buckpuma]

Who is this Cisco Guy ?

 

[doots]

Cisco is one of the first modders that built pv mods.

Who is this Cisco Guy ?

 

[buckpuma]

Does he sell these attys ?
What company is he affiliated with ?

 

[Modrod.]

My concern with HV atty's is they defeat the purpose of going to a higher voltage, no?

I've never tried 6v but i've done a huge amount of research. If i go 6v with an HV atty it's essential no difference then a reg vaping experience.

If i'm wrong, tell me. I'd love to know the differences.

As i'm told if you use a standard atty on a 6v mod setup, your literally getting a hot vapor PUSHED into your mouth almost and you have to reapply liquid to it ALOT and always keep it wet. Where as, if you go with an HV atty your not having those problems.

So i ask, what's the difference between a 6v with HV atty and a reg atty at say 3.7 or 4.3?

The HV306 I got is 3.5 ohm. The atty doesn't get too hot and still gives that warm 6v vape. I also use 510 carto's that are around 3.3 ohm so wattage is nearly the same. The atty is designed for 6v vaping which is why they're referred to as HV atty's. They're intended to last longer and not pop as easily at higher voltage.

 

[BlackMetalBuick]

Got the tracking info for my 306, should be here Tuesday. But my starter kits were also supposed to show up on a Tuesday and ended up being one day early. One can only hope.

 

[B-Rad_The_Mad_Vapr]

If you like the 306 attys and want to use them at 6v, go to Welcome to IkenVape Isaac sells the 306 in 3.5ohm, which should be really nice on your omega at 6v. The regular generic 306 meter at around 3.0 ohms, which might be a little hot at 6v, but doable.

I agree I'm using his HV3.5ohm attys at 6 & 7.4v they are nice

 

[B-Rad_The_Mad_Vapr]

My concern with HV atty's is they defeat the purpose of going to a higher voltage, no?

I've never tried 6v but i've done a huge amount of research. If i go 6v with an HV atty it's essential no difference then a reg vaping experience.

If i'm wrong, tell me. I'd love to know the differences.

As i'm told if you use a standard atty on a 6v mod setup, your literally getting a hot vapor PUSHED into your mouth almost and you have to reapply liquid to it ALOT and always keep it wet. Where as, if you go with an HV atty your not having those problems.

So i ask, what's the difference between a 6v with HV atty and a reg atty at say 3.7 or 4.3?

Isaac's HV attys are only 3.5 ohm unlike most others HV that are 4.2-4.6ohm try them you'll like it

 

[Modrod.]

If you like the 306 attys and want to use them at 6v, go to Welcome to IkenVape Isaac sells the 306 in 3.5ohm, which should be really nice on your omega at 6v. The regular generic 306 meter at around 3.0 ohms, which might be a little hot at 6v, but doable.

Isaac's HV attys are only 3.5 ohm unlike most others HV that are 4.2-4.6ohm try them you'll like it

That's what I have. Loving it.

 

[Liv2Ski]

MOdrOD and others ----SOLD. I am ordering some Ikenvape HV 306's for the soon to arrive ProVari. Of course I can use the Ciscos at 3.7 on this badboy but we all know if you can dial up the voltage it will certainly get dialed up. I have been looking at these atty's but with eGo's and a ProVape I didn't see much sense in shelling out $$$$ if I didn't have a unit to drive them. Oh well another package on its way. Thanks for the info

 

[Modrod.]

MOdrOD and others ----SOLD. I am ordering some Ikenvape HV 306's for the soon to arrive ProVari. Of course I can use the Ciscos at 3.7 on this badboy but we all know if you can dial up the voltage it will certainly get dialed up. I have been looking at these atty's but with eGo's and a ProVape I didn't see much sense in shelling out $$$$ if I didn't have a unit to drive them. Oh well another package on its way. Thanks for the info

No problem. I'm sure you'll be happy with the HV306. They're very drip friendly as it takes quite a bit to flood them. I intentionally flooded mine just to see what it would take to do so. I was surprised at how many drops it took.

 

[flagreekguy]

Does he sell these attys ?
What company is he affiliated with ?

They call cisco the mod father because he's one the geniuses of mods. and he is totally against stacking batteries for a higher vaping experience. so, he came out with the LR 306 so you can get an awesome vaping experience even at 3.7.

He actually has a mod coming out soon called the helix. Everyone is excited about that one and the shock wave.

If you want a true cisco lr 306 atty goto vaporflow.com and order them there. they will also give you some drip tips if you order 2 for 20.00 (yes 10.00 per atty but it's totally worth it. these suckers are the business)

 

[flagreekguy]

I agree I'm using his HV3.5ohm attys at 6 & 7.4v they are nice

LET ME GUESS, ON YOUR GGTS? LOL hehee. just picking on ya 8)

 

[flagreekguy]

MOdrOD and others ----SOLD. I am ordering some Ikenvape HV 306's for the soon to arrive ProVari. Of course I can use the Ciscos at 3.7 on this badboy but we all know if you can dial up the voltage it will certainly get dialed up. I have been looking at these atty's but with eGo's and a ProVape I didn't see much sense in shelling out $$$$ if I didn't have a unit to drive them. Oh well another package on its way. Thanks for the info

Another vaporer chomping at the bit for the mail man to get to their house LOL aren't we all the same here? LOL

 

[Modrod.]

I'll probably give LR's another try once I get a VV mod in a couple weeks. LR carto's didn't do much for me at 3.7v on the Omega.

 

[fellmc2]

Maybe cause theyre high powered?

 

[Sorrid]

Dude the sound is half the damned fun!!! Sometimes I keep the button pressed after the draw just to amplify it. Not sure BSHHHHHHHHHH does it justice though. I think I should head over to Vaporflow and order another 5 since he will probably be out of stock the way we are talking them up. Sorrid I would spot you one if you where in NY I am hoarding 25 right now!!!!

No hurry mate, I have this HV 306 to tide me over until everything else gets here so I'm all set!

 

[pasture]

meh. ill stick with the 302 at 5V.