Win a Conqueror RTA tank from Wotofo

[KayP]

Entry #2:

2. What wattage do you use on a dual coil tank and what Fahrenheit degree/ Centigrade do you set to temp control your tank if you have TC (temp control) experience, if not, tell us what kind of tank do you use often.

I have not delved into temperature control as of yet; however, I still do like dual coils in power mode. My wattage preferences vary depending on the type of wire and its resistance. For round wires I prefer between 0.3 to 0.7 oHms and 36 to 65 watts. For clapton wires I like 0.2 to 0.6 oHms and 45 to 80 watts. I have quite a few tanks but I use my Geek Vape Griffin RTA most often.

 

[KayP]

Entry #3:

3. Tell us your opinions/first impression on Postless deck design?

I have no experience with a postless deck atomiser; however, I am still interested in trying one out. My first impressions are as with any new vape gear/building method there may be an initial steep learning curve; however, it becomes much easier once you get the hang of it. In addition, having a deck with no posts taking up room leaves you more space to play with your coil size and styles, for example, horizontal stove top coils - Not that I can build one.

 

[KayP]

Entry #4:

4. What else specs do you expect Wotofo adds on this tank?

Expect??

I am a down to earth person. I see no point in having expectations in something which may be unobtainable. Sure I could use my google-fu fingers to research for and list some negatives about this product; however, realistically these issues will most likely remain until the next version of the tank is released.

 

[fatum]

1. What do you know about Wotofo brand?
I know the serpent tank which is excellent. One of the more trusted names in the business.

 

[fatum]

2. What wattage do you use on a dual coil tank and what Fahrenheit degree/ Centigrade do you set to temp control your tank if you have TC (temp control) experience, if not, tell us what kind of tank do you use often.
Wattage in power mode is between 15 and 60 Watt, depending on the juice and the coils. In TC it mostly depends on the juice I'm using. With a new juice I start at a low temp and increase it slowly.

 

[fatum]

3. Tell us your opinions/first impression on Postless deck design?
Love the design. Only worry is the fact that you have to cut the leads to the right length. I hope that won't be too difficult.

 

[fatum]

4. What else specs do you expect Wotofo adds on this tank?
Excellent airflow and excellent flavour

 

[orest]

1. Please hear what they are doing is not even bad clones devices . Then they started on their own and produce excellent atomizers of new products such as the Serpent and Serpent mini ( particularly like ) .. of the modes I will not say anything because it never seen

 

[orest]

2. Usually 40 - 50 watts exhibiting Griffin . Winding Spit 0.3 of Cantal in parallel with 0.4 mm.TK not use .
I use or Griffin or Goliath 2

 

[contax787]

1. Wotofo produces excellent mods and tanks

 

[markfm]

Entry 4 -- What other specs do you expect.

Knurled edges, but the photos look like the top cap does have that - good job!

Thanks again, HG

 

[Coolloser]

1. I don't know much about wotofo at all. I've just seen them mentioned by users

 

[Coolloser]

2. 35 -60w is where I hit, depending on the juice and mod

 

[Coolloser]

3. I think postless is great, less parts to fail.

 

[Coolloser]

4. Spec's to add would include colors and a great sink/washer for Joyetech compatibility

 

[DmitryS]

1. Now I know that there is a brand Wotofo. Another found that Atomizery Soul Plane makes

 

[Last_Unicorn]

1. What do you know about Wotofo brand?

I used only Wotofo Freakshow RDA month ago - I like it

 

[DmitryS]

2. I liked to float on a ceramic Coyle cCEL on nickel, on Vaporesso TARGET 75w. Exhibit 190 ° C.

 

[DmitryS]

3. How does strictly, concisely and beautifully. Very like

 

[DmitryS]

4. The absence racks