Wotofo The Troll RTA
- Thread starter janne303
- Start date
- th_trl_thread_readers 0
- Status
Wow, really liking this atomizer. Simply amazing flavor, easy to fill, everything about it is great imo. Don't be afraid of the insulator burning, you really have to build it wrong and pulse the coils til they are damn near molten for them to melt. Push them coils down to where they are a mm or two away from the airflow and they aren't even close to the insulator. Pulse them at low wattage just enough to see the hot spots and everything will be fine. Best flavor I've had from an RTA to date. Airflow is just perfect. I use SS Alien coils built 5 wraps ohming out to .2 on a 2.5mm rod, perfect amount of cotton for the juice flow holes and everything.
Yeah, I'm starting to get over the concern about the insulator and wanting to order one. Every review is raving about the flavor and how well this RTA wicks. I'll just have to do as you suggested - keep the coils low and pulse just enough to get rid of hot spots.
Agreed. I just swapped out my 2.5mm coils for a set of 3mm fused claptons.. ohmed out to about 0.15 firing at 70w and it vapes so good. I swapped out 2 of my screws though coz i couldnt tighten them down anymore, used my merlin mini's spare hex screws. How are you wicking yours? I get a little leaking the first time i filled it up or whenever i purge right after filling it.
None at all if you get the right amount of cotton in the juice holes. I use a 2.5mm coil packed snugly and it seems to be a perfect amount of cotton for the juice holes.
Thanks for all the posts guys,been eyeing this one for quite some time,does anybody have this and the engine? Reason I ask is that they seem to wick the same way and I wanted to know how they compare? Air flow? Flooding ? Ect... Thanks guys;-)
leaks with 2mm coils for me, but I'm used to building for tanks with much smaller decks that like thinner wicks. I'm going to finish the tank I'm vaping and throw a 3mm build on it to see if the additional wick does the trick. If it didn't leak it'd be perfect, so I have my fingers crossed for the 3mm build.
Oh crap that sucks,but then again I would imagine that 2 mm coils is on the small side to fill up those big wicking holes,hope 3 mm coils works out better for you bud;-) keep us updated if in fact that solved the issue,I have to wait a bit to order mine with the Chinese holiday in all no body as the thing in stock :-( but hopefully next week I should be able to score and will report in ad well;-)
Btw it might be wisling on you cause the coils are too small and too much air might be passing by the coils? Not sure just a thought.
it's noisy when you cut the airflow down from anything but wide open
Franck, I will be ordering this next week as well. Looks promising.
Have the EXO RTA and the Engine Nano coming so I'll have something to play with while I wait for the Troll from 3F
Have the EXO RTA and the Engine Nano coming so I'll have something to play with while I wait for the Troll from 3F
I love this RTA. Easy assembly, few parts, easy coiling and wicking, no leaking, juice capacity, flavor and vapor production. I think it's my favorite to date.
Hey dp how's it going bud,long time no chat,you've the xo rta for a while now as I remember we had a few conversations about how muted the flavor is,mines back in its box where it belongs I never got into it,frankly I hated it lol,glad your going to get the troll rta as am going to nab one soon as well,looking forward to reading your thoughts on it cuz they are always well detailed and very helpful as well,have a great week end my friend and we will talk soon;-)
Im using 3mm coils, leaked for the first refill, i think its coz i didnt saturate my cotton enough for it to expand. Its been a week and havent leaked since. Dual fused claptons .15ohms firing at 70w. I love this thing!
Glad to hear it's working out great for you bud,I would still like to hear from someone that as one and could compare it to the obs engine as far as air flow,wicking ease,and over all performance ;-)
Not gonna lie....i actually managed to burn my insulator a "smidge" my 4th day with it causing a brown spot, and that was me just pulsing the coils a little bit, so you should definitely pay attention when messing with your build. I also make sure to have my coils a reasonable distance from the insulator as well, but it still happened to me...but besides all that its still a great RTA.
Am sorry to hear bud,hopefully it still works good and does not taste nasty lol,thanks for sharing am sure that will help a lot of us less experienced vapers( me included) lol
- Status
Similar threads
