Your Favorite Provari Setup (Voltage & Atty)

[Digs]

I recently ordered a Provari and since I'm going to have to wait a while before I actually get it I'd like to get a feeling for how others are using it. What I'd like to do is get a list of what everyone's absolute favorite setup is in terms of voltage, resistance, and atty used. ken729 started a thread like this here and I've used the data from that thread to start this one.

Below is a table that lists everyone's favorite setup. I will continue to update this table as long as people continue to submit their setups. If your favorite setup has changed I will update it for you.

Name            Volts   Ohms    Watts           Atomizer

Tasteles        4.6     2.2     9.6             510 (Standard)
ken729          4.4     2.2     8.8             510 (Standard)
progg           4.2     2.2     8.0             510 (Standard)
Strauss95       4.5     2.2     9.2             510 (Standard)
tuakong         4.5     2.5     8.1             510
Harry4          3.8     1.5     9.6             510 (LR)
Stonemull       3.9     2.2     6.9             ego-T
DjCaptainKiddo  4.6     2.0     10.6            Carto
LukeNM          4.7     3.0     7.4             Boge Carto
jddehoff        5.0     3.0     8.3             Boge Carto
Laszlo          4.4     3.1     6.2             Boge Carto
horton          4.1     2.6     6.5             Clearomizer
silentt         5.0     2.8     8.9             MAP Tank
beetlespin      4.3     3.1     6.0             MAP Tank
Lady M          5.0     3.2     7.8             MAP Tank
crackbag        4.7     3.2     6.9             MAP Tank Mini
Jtman           4.6     2.6     8.1             Unknown

 

[kellie]

I am getting my Provari shipped on Thursday. They got all sneaky on me while I was bein sneaky and tryin to get 2 weeks of waiting out of the way before I got paid a week later they charged my card and said they were ready to ship. Just my luck lol. They said they would hold it for me yay!!!!!! This poll is very helpful to me. I use tanks and clearomizers, Waiting to try Fluxomzers.

 

[progg]

While I can see how this can be somewhat helpful and appreciate the effort --- The beauty of the device is the ability to change voltage by .1 increments.

While I'm mostly in the low to mid 4 volt range on a 2.2 ohm atty -- I'm not stuck there -- priceless.

 

[Digs]

While I can see how this can be somewhat helpful and appreciate the effort --- The beauty of the device is the ability to change voltage by .1 increments.

While I'm mostly in the low to mid 4 volt range on a 2.2 ohm atty -- I'm not stuck there -- priceless.

Exactly. With VV we're able to dial in our "sweet spots" like never before. That's what makes this so interesting and this type of thread possible. Think of this as guitarists sharing their favorite amp settings. Every guitarist has their favorite settings, but they're not stuck with them and they often change them to suit different styles of music.

 

[progg]

Exactly. With VV we're able to dial in our "sweet spots" like never before. That's what makes this so interesting and this type of thread possible. Think of this as guitarists sharing their favorite amp settings. Every guitarist has their favorite settings, but they're not stuck with them and they often change them to suit different styles of music.

Nice analogy. How many settings do you suppose Al di Meola had/has?

There's many vaping variables to account for with attys, juices and user preference. The ProVari simplifies vaping and satisfies the user.

I'll watch the thread with interest.

 

[jayhawk]

I use my provari at 5.0 volts with a 3.0ohm boge cartomizer , that seems to be my sweet spot for vaping . I sometimes throw a regular 510 atty on that's 2.2 ohm and it works great right at 5 volts too .

 

[silentt]

Right now i'm loving my 2.8ohm MAP-Tank(but shows up as 3ohms on provari) at 5 volts

 

[crackbag]

i wanna be on it too!!!

provari - 3.2 ohm mini maptank 4.7v!!!

 

[Tasteles]

2.2 ohm standard 510 Joy Atty at 4.6 volts and a 2.5 ohm CE2 at 4.2 volts

 

[Harry4]

I'm using a 1.5 ohm 510 at 3.8 volts. I have a large supply of LR attys that I bought for my chuck. This provari is plain ridiculous...I'm fogging up the house. And my lungs hurt in a good way.

 

[LukeNM]

This is where I alway seem to end up...

4.7 V - 3.0 Ohm - 7.3 W - Boge Cartomizer

 

[Lady M]

3.2 map tank. 5.0 on the Provari with most of my flavors.

 

[wolflrv]

3.2 map tank at 4.5-4.7 volts...my all day full-time vape.

 

[Digs]

Unfortunately I am no longer able to update the table because of a time limit for editing posts. I've sent an e-mail to a forum administrator to try and see if I can obtain permission to edit the OP for an extended duration.

 

[v2kjok3rz]

Using a 2.1 ohm Boge carto at 4.1v = 8W getting really nice hits and clouds of vapor. Provari is an awesome product!!!

 

[iVari]

3.3ohm MAP tank at 4.5V.
2.8ohm Clearomizer XL at 4.1V.

 

[Digs]

I received a response from Angus and he told me that it's not possible to unlock specific threads for extended editing. However, he did say that a ProVape moderator might be able to update it for me so I might see if I can get that to happen after we get some more submissions. Here's an update of the table as it stands now:

Name            Volts   Ohms    Watts           Atomizer

PKZap27         4.5     2.2     9.2             510 (Standard)
Tasteles        4.6     2.2     9.6             510 (Standard)
ken729          4.4     2.2     8.8             510 (Standard)
progg           4.6     2.2     9.6             510 (Standard)
Strauss95       4.5     2.2     9.2             510 (Standard)
tuakong         4.5     2.5     8.1             510
Harry4          3.8     1.5     9.6             510 (LR)
Stonemull       3.9     2.2     6.9             ego-T
DjCaptainKiddo  4.6     2.0    10.6             Carto
v2kjok3rz       4.1     2.1     8.0             Boge Carto
LukeNM          4.7     3.0     7.4             Boge Carto
jddehoff        5.0     3.0     8.3             Boge Carto
Laszlo          4.4     3.1     6.2             Boge Carto
horton          4.1     2.6     6.5             Clearomizer
wolflrv         4.6     3.2     6.6             MAP Tank 
iVari           4.5     3.3     6.1             MAP Tank
silentt         5.0     2.8     8.9             MAP Tank
beetlespin      4.3     3.1     6.0             MAP Tank
Lady M          5.0     3.2     7.8             MAP Tank
crackbag        4.7     3.2     6.9             MAP Tank Mini
Jtman           4.6     2.6     8.1             Unknown
--------------------------------------------------------------
AVERAGE         4.5     2.6     8.0
MIN             3.8     1.5     6.0
MAX             5.0     3.3    10.6

 

[PKZap27]

-Snipped-

Is it possible to add a row on the bottom of the list that shows the Average, Min & Max for Volts Ohms & Watts.



Edit to add;

Digs, thanks for making the changes to show the Average, Min & Max.

 

[PKZap27]

My current setup.

2.2 ohm standard 510 Joy Atty at 4.5 volts = 9.2 watts.

Until my MAP Tank shows up!

 

[progg]

Hey Digs -- I've been running at 4.4 to 4.8 (broken in, standard 510) this week.