Yowsa! 4 months in, first LR 510

[icemanx3]

Wow all, got my first low resistance 510 atomizer from madvapes in and slammed it on my 3.7v mod. Ummmmm...ya. Insane! This thing hits like a beast! I am filling up the entire living room with thick heavy plumes of Boba's Bounty! Keep these wet for sure, or you get a good case of fire throat So awesome to get things like this that work great!! Now, off to drill out my white 3.7v box mod!

Happy Friday!

ice

 

[timato]

Bobas on a lr306 is AWESOME! And if some one dosent agree then they are just WRONG!..lol

 

[icemanx3]

Right - just got my 18ml of Boba's today, thank goodness my sampler just ran out...I did get some 306s from MadVapes but not sure about them yet...and they aren't the Avid cisco ones so I need to play with them some more - they seem to have a learning curve at the very least. But boy, the LR 510 just kills the regular 510s by far! Good times my friend, good times!!

ice

 

[classwife]

LR 510 attys are great....and yes....oh so nasty if they get low !!!!!!!!!! eeeewwwww !!!!!

 

[Liv2Ski]

Sounds like your standard resitance atty's will be getting dusty soon just sitting there. Hang onto them though since I found a goldmine in old 510's when I picked up a VV device. If you like dripping the LR 510 on 3.7V wait till you try a LR 306!!!!

 

[JTman]

I agree with Liv2Ski. Hold on to those old reg attys. Someday you may (should) get a Variable voltage mod and it will make any/all atties hit like that 510 LR does for you now.

The first time I tried an LR I didnt like it. The 2nd time around I was hooked and could never go back to standard resistance (until I got my ProVari that is). Be prepared with extras, LR's tend to not last as long. I learned that one the hard way when my only LR died and I was forced to use standard res atties for a few days... it was my most trying time to stay off analogs since I started vaping.

 

[VaporMadness]

Wow all, got my first low resistance 510 atomizer from MadVapes in and slammed it on my 3.7v mod. Ummmmm...ya. Insane! This thing hits like a beast! I am filling up the entire living room with thick heavy plumes of Boba's Bounty! Keep these wet for sure, or you get a good case of fire throat So awesome to get things like this that work great!! Now, off to drill out my white 3.7v box mod!

Happy Friday!

ice

Yup... a real eureka moment!

 

[icemanx3]

The LR 510 is just off the charts. I have some 306s but haven't got me groove down with them yet. And since this LR 510 is hitting like a heavyweight boxer...I'm in bliss. BWB maple tobacco right now...GAZINGA!!!!!!!!!!!!!!!



ice

 

[timato]

I've got generic, joye, and cisco 306s. And them cisco' just kick A. But I do go to510 a lot, its amazing what lr has done for 3.7 vaping. I thought I would have to go 6v in my juice feeders, but nope lr is great!

 

[VaporMadness]

I've been getting LR attys (2ohms) from ikenvape since last summer, I'm really happy with them. But with so many mentions of the cisco's, curiosity finally got me to pick up a few (2 ohmers, 901/801/510, one each)... haven't tried them yet.

@ice...

http://www.e-cigarette-forum.com/fo...3-nor-cal-vapers-meetup-go-8.html#post2722026

u going?

 

[Goldenkobold]

Let us know what you think VaporMadness,
You got the two best brands in my opinion with Cisco and Ikenvape. Some of the generic LR 510's I have tried have been less than spectacular in both lifespan and performance. I know its just a heating element in a metal tube but there is significant improvements with those two vs the rest in my opinion.

 

[timato]

I've been getting LR attys (2ohms) from ikenvape since last summer, I'm really happy with them. But with so many mentions of the cisco's, curiosity finally got me to pick up a few (2 ohmers, 901/801/510, one each)... haven't tried them yet.

@ice...

http://www.e-cigarette-forum.com/fo...3-nor-cal-vapers-meetup-go-8.html#post2722026

u going?

Haven't tried iken's lr's but I should, I was very happy with his hv atties(3.5ohm) great quality!

 

[revolver]

For me 1,5 ohms LR 510 will do the trick on my eGo. They DO indeed hit like a heavy-weight champion! I drip 'em with my daily vape which is 'flavorless' PG-based 24 mg. It is HEAVEN 24/7
Regular atties still cool and what I use for flavors, every now and then; just to relax. I used to like flavors on HV but nowadays, if Im doing flavors its just regular 3,7 for them...
This routine I love!

 

[revolver]

I am still waiting for my CISCO 306 LR which was promised by a local vendor some time ago...

How is the CISCO 306 LR and CISCO 510 LR better than the rest? Same with Ikenvape...?

Ive seen the reviews, but I was wondering if any of you could summarize this up as with a general statement which they happen to find true about CISCO atties and Ikenvape ones in general, as a pattern, if possible... (maybe not coz it depends on the very type of atty...)

?

Get it? Im planning to try them all, anyway but would love to hear not differences about for example 306 LR vs CISCO version of it + the same with 510 LR... More of a GENERAL reference which applies to every CISCO and IKEN versus the rest, if possible and illustrating...

Thanks.

 

[Liv2Ski]

revolver - they are made better. On the Cisco's for example he has sourced and supplied the NiChrome wire from the U.S. which is used in the manufacturing process of his atty's. Both IKEN and Cisco have worked with the manufactures to build to their specification and overall these two guys provide the Gold Standard in atty's. Also if you have not tried an Iken Carto man those things really bring it too. Hope that helps

 

[slumdog]

yep the only time i use my reg res 510 is above 4.3v but i love to dip my 306 lr cisco on a fresh charged 3.6v cant wait for my provari to come in but until thin ima keep switching and stacking batts lol !!!!!!

 

[revolver]

revolver - they are made better. On the Cisco's for example he has sourced and supplied the NiChrome wire from the U.S. which is used in the manufacturing process of his atty's. Both IKEN and Cisco have worked with the manufactures to build to their specification and overall these two guys provide the Gold Standard in atty's. Also if you have not tried an Iken Carto man those things really bring it too. Hope that helps

Thanks, gonna order everything CISCO and IKENVAPE ASAP.

 

[n2xe]

Sounds like your standard resitance atty's will be getting dusty soon just sitting there. Hang onto them though since I found a goldmine in old 510's when I picked up a VV device. If you like dripping the LR 510 on 3.7V wait till you try a LR 306!!!!

Ditto, get a Cisco LR 306, it's even better

 

[icemanx3]

I've been getting LR attys (2ohms) from ikenvape since last summer, I'm really happy with them. But with so many mentions of the cisco's, curiosity finally got me to pick up a few (2 ohmers, 901/801/510, one each)... haven't tried them yet.

@ice...

http://www.e-cigarette-forum.com/fo...3-nor-cal-vapers-meetup-go-8.html#post2722026

u going?

Don't think I can make that

One of these days!

ice

 

[Secti0n31]

love my 2.0ohm 510's! My 1.5-1.8 306 and 510s are a little too hot but not bad. 2ohms on a 3.7 is my butter zone.